Postscript Configuration; Emulation Settings For Postscript - Xerox 4213 User Manual

POSTSCRIPT EMULATION

PostScript configuration

A4-16
The PostScript submenu allows you to change options in the
emulation. This submenu is accessed from the EMULATION
heading at the Main Menu.
There are two types of configuration changes which can be
done:
Permanent settings, which remain unchanged even through
•
power off/on cycle.
Temporary settings, which remain current until a software
•
command is received, or the printer is switched off.
Note The options you select as defaults apply to the selected
•
emulation only. To change the options for an emulation, first
display the emulation heading at the Main Menu, step
through the options and select those you want as the
defaults for the emulation.
configuration at the Reset Menu.

Emulation settings for PostScript

The following PostScript emulation menu items may be set
permanently or temporarily:
2-sided print mode
•
Tumble (print as pad or book binding)
•
Paper tray
•
Tray switching
•
Tray switch sequence
•
Paper size for Manual Bypass/Multi-Media feeder
•
Then save the emulation
XEROX 4213 LASER PRINTER USER GUIDE