Show Access_Control - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3.4 show exit_code
2.3.5 show partition configuration
2.3.6 show partition dynamic_reconfiguration
2.3.7 show partition home
2.3.8 show partition lan_device_mode
2.3.9 show partition name
2.3.10 show partition memory_mirror_ras_mode
2.3.11 show partition memory_operation_mode
2.3.12 show partition pci_address_mode
2.3.13 show timezone
2.3.14 show gateway
2.3.15 show gateway_ipv6
2.3.16 show http
2.3.17 show http_port
2.3.18 show https
2.3.19 show https_port
2.3.20 show ip
2.3.21 show ipv6
2.3.22 show hostname
2.3.23 show maintenance_ip
2.3.24 show ssh
2.3.25 show ssh_port
2.3.26 show telnet
2.3.27 show telnet_port
2.3.28 show network
2.3.29 show ntpq
2.3.30 who
2.3.31 help
2.3.32 netck traceroute
2.3.33 netck arptbl
2.3.34 netck arping
2.3.35 netck ifconfig
2.3.36 netck stat
2.3.37 show dynamic_reconfiguration status

2.3.1 show access_control

Setting value of current access control is displayed.

Privilege: Administrator
(1) Input format
show access_control
(2) Option
None
(3) Usage example
# Administrator> show access_control
SSH: All
Telnet:All
HTTP:
HTTPS:IP Address: 10.66.250.190: Netmask:24
SNMP: All
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).