Figure 1.76 [Snmp V3 Configuration] Window; Table 1.106 Setting And Display Items In The [Snmp V3 Configuration] Window; Table 1.107 Buttons In The [Snmp V3 Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations

FIGURE 1.76 [SNMP v3 Configuration] window

TABLE 1.106 Setting and display items in the [SNMP v3 Configuration] window

Items
Engine ID
Sets the Engine ID.
You can use alphanumeric characters, spaces, and the following characters:
! " # $ % & ' ( ) = - ^ ~ ¥ @ ` [ ] { } : ; * + ? < > . , / _ |
However, the following restrictions apply:


For an explanation of the setting and display items other than [Engine ID], see
display items in the [SNMP Trap] window

TABLE 1.107 Buttons in the [SNMP v3 Configuration] window

Buttons
Apply Sets the specified information.
Cancel Restores the original information and does not set the specified information.
(1) Menu Operation
[Network Configuration] - [SNMP Configuration] - [SNMPv3 Configuration]
(2) Window Operations
Correcting the information on the selected user
-
1. Check the check box of the user. Then, enter any necessary information. Finally, click the
[Apply] button.
The character string cannot begin with a space or #.
The character string cannot end with a space.
window.
Description
TABLE 1.104 Setting and
Description