Konica Minolta 7085/FORCE 85 Service Manual page 721

9. Remove two lock materials inside the stacker
(lower).
Two lock materials
10. Install the paper exit up-down tray on the up-down
portion (paper exit side) of the Finisher. (Truss
screw M4x6: 2)
[Caution]
When installing paper exit up-down tray, fit the four
auxiliary fittings to the guide holes of the paper exit
up-down tray before fixing screws.
Paper exit
up-down tray
Truss screw M4x6
11. Install the paper exit tray (lower) on the lower
up-down portion (paper exit side) of the Finisher.
[Caution]
The paper exit tray (lower) is attached to FS-108B/
108BM only.
12. Install the paper exit tray /1 on the secondary exit
portion, then fix it with screws. (SEMS II M3x6: 2)
SEMS II M3x6
13. Connect the two connectors of the Finisher to the
two connectors on the rear left side cover of the
main body.
E-7
Paper exit tray (lower)
Paper exit tray /1