WRITE UNIT
(9) Loosen the two screws to draw out and remove
3
the write unit.
Screw (loosen)
Screw (loosen)
Write unit
(10) Reinstall the above parts following the removal
steps in reverse.
MODEL
7075/7085
SERVICE HANDBOOK
MANUAL
REVISED EDITION
[2] Cleaning the Dust-proof Glass
Caution: Be sure the power cord has
a.
Procedure
(1) Draw out the drm unit. (See "Drum Unit.")
(2) Remove the dust-proof glass assembly by draw-
ing it out forward.
(3) Using a cleaning pad and blower brush, clean the
dust-proof glass portions.
(4) Reinstall the above parts following the removal
steps in reverse.
DATE
3 - D - 4
Jan. 2002
3
been unplugged from the wall
outlet.
Dust-proof glass
Drum unit
PAGE
METHOD
3-D-2
REPLACEMENT