Konica Minolta 7085/FORCE 85 Service Manual page 346

25 ADJUSTMENT
(2) Collecting data No.4: RADF mode
KRDS
parameter
NO
(F0)
1 00 Number of originals fed in ADF mode
2 01 Number of originals fed in RADF mode
3 02 Number of 1-sided SDF original fed
4 03 Number of 2-sided SDF original fed
5 04 Number of 1-sided mixed original fed
6 05 Number of 2-sided mixed original fed
7 06 Number of 1-sided Z-folded mode original fed
8 07 Number of 2-sided Z-folded mode original fed
9 08 Undefined
10 09 Undefined
11 0A Undefined
12 0B Undefined
13 0C Undefined
14 0D Undefined
15 0E Undefined
16 0F Undefined
1. The counter is incremented each time one original side has been scanned in each mode.
2. Counters 1 and 2 count original sides independently of counters 3-8.
(3) -1 Collecting data No.5 (7075), No.7 (7085): JAM data of time series
3
A jam code, total count, date and time of occurrence, tray type, paper size, and magnification can be
displayed for the latest 100 jams.
-2 Collecting data No.5: Black ratio of each section (7085 only) *1
This allows checking the average black ratio of 5000 prints for the latest 30 data.
-3 Collecting data No.6: Black ratio ranking list (7085 only) *1
This allows checking black ratio data, number of prints, transfer paper size, mode, and date for the top 15
job data ranked from highest rates of black ratio.
*1: This black ratio is the theoretical value obtained by converting the black dot area on the image data and
the area of the transfer paper, therefore it is different from the black ratio obtained by the actual printing.
MODEL
7075/7085
SERVICE HANDBOOK
Items
MANUAL REVISED EDITION
Maximum
count
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
99999999
DATE
1 - 22
Jan. 2002
3
Remarks
All counters are 8-digit
counters.
PAGE METHOD
1-22 REPLACEMENT