Removing And Reinstalling The Paper Feed Roller And The Feed Roller - Konica Minolta 7085/FORCE 85 Service Manual

[5] Removing and Reinstalling the
Paper Feed Roller and the Feed
Roller
a. Procedure
(1) Draw out tray 3.
(2) Remove the two retaining rings and slide the two
bearings outward to detach the paper feed roller
unit.
Retaining
ring
Bearing
Paper pick-up
roller unit
3
Retaining
ring
Bearing
Paper pick-up
roller unit
MODEL
7075/7085
SERVICE HANDBOOK
7075
Bearing
Retaining
ring
7085
Bearing
Retaining
ring
MANUAL REVISED EDITION
(3) Remove the following parts from the paper feed
roller unit to remove individual rollers:
• Retaining rings (3)
• Bearing (1)
• Paper feed reference actuator
• Shafts (2)
• Fixing plate
Painting mark
Paper pick-
up roller
3
Painting mark
Paper pick-
up roller
(4) Reinstall the above parts following the removal
steps in reverse.
Caution 1: When reinstalling rollers, pay
Caution 2: Check whether grease or like
DATE
3 - K - 3
Jan. 2002
3
TRAY 3 PAPER FEED UNIT
Feed roller
Fixing
plate
Retain-
ing ring
Bearing
Paper pick-
Retaining
up
ring
reference
actuator
Feed roller
Fixing
plate
Retain-
ing ring
Retaining
Paper pick-
Bearing
ring
up
reference
actuator
attention to their orientation.
remains on each roller. If it does,
wipe it.
PAGE METHOD
3-K-3 REPLACEMENT
7075
7085