Running Test Mode; Test Pattern Output Mode - Konica Minolta 7085/FORCE 85 Service Manual

[15] Running Test Mode

Testing continuous copy operation.
Select Running Test Mode in the 36 Mode Menu
3
Screen.
This adjustment consists of the following items:
Intermittent copy mode
1
In this mode, the machine goes into the copy
ready state after completing a set number of copy
operation, waits 0.5 sec, and then repeats the
same operation.
Paperless running mode
2
In this mode, the machine makes copies at approxi-
mately the same timing as for normal copy without
performing paper detection or jam detection. In
addition, similar to intermittent copy mode, the ma-
chine goes into the copy ready state after complet-
ing a set number of copy operation, waits 0.5 sec,
and then repeats the same operation.
Paperless mode
3
In this mode, the machine makes copies at approxi-
mately the same timing as for normal copy without
performing paper detection or jam detection.
Paperless endless mode
4
In this mode, the copy quantity is set to infinity.
In addition, similar to Paperless mode, the ma-
chine makes copies at approximately the same
timing as for normal copy without performing
paper detection or jam detection.
Running mode
5
This mode consists of Paperless endless mode
with repetitive optical scan and auto paper feed
tray change.
Step
1 Enter the 36 mode.
2 [36 Mode Menu Screen]
Press " Running test mode."
3
3 [Running test mode menu Screen]
Press mode keys
4 [Copy Screen]
Press the Start button.
5 Check the copy operation and then press
the Stop button to stop.
6 Turn off the main switch and exit Run-
ning Test Mode.
MODEL
7075/7085
SERVICE HANDBOOK
Operation
to .
1
5
MANUAL REVISED EDITION

[16] Test pattern output mode

Output test pattern.
Select [4] Test pattern output mode in the 36 Mode
Menu Screen to display the Test Pattern Output Mode
Screen.
Caution: Do not touch any mode that is not spe-
cifically described.
Step
1 Enter the 36 mode.
2 [36 Mode Menu Screen]
Press "
3 [Test pattern output mode menu Screen]
Use the numeric keys to enter the
number of the test pattern to output and
press the
4 Press the
5 [Copy Screen]
Select A3-size paper and press the Start
button to output the test pattern.
6 To output another test pattern, press the
C button while pressing the P button and
repeat steps 3 to 5.
7 Press the
DATE
1 - 87
Jan. 2002
3
36 ADJUSTMENT
Operation
Test pattern output mode."
4
key.
SET
key.
COPY SCREEN
key to end.
PREVIOUS SCREEN
PAGE METHOD
1-87 REPLACEMENT