Page 2: Table Of Contents
Authentication Based on User Password/Account Password............2-61 2.6.2 User Authentication Using IC Card....................2-63 2.6.3 User Authentication Using External Server..................2-65 Displaying Operation Guide: Help Message ................2-68 Adjusting Response Time of Touch Keys: Accessibility ............2-71 bizhub PRESS 1250/1052 Contents-1...
Page 3 Replenishing Water Supply in Humidifier Tank of Relay Unit RU-509 ........5-37 Replenishing Bind Parts to Auto Ring Binder GP-502 ............... 5-39 5.10 Replacing Waste Toner Box......................5-41 5.11 Disposing Staple Scraps ......................5-43 5.12 Disposing Punch Waste ....................... 5-45 bizhub PRESS 1250/1052 Contents-2...
Page 4 Auto Paper ............................. 6-55 Image Rotation ..........................6-56 Setting Reserve Job........................6-58 Application Functions To Use Application Function......................7-2 7.1.1 Overview of Application ........................7-2 7.1.2 Display under [Application] on the Copy Screen ................7-3 7.1.3 Bookmark............................7-4 bizhub PRESS 1250/1052 Contents-3...
Page 5 Taking Out Printed Sheets From the Tray of Finisher FS-532 ..........8-30 8.5.1 Taking Out Printed Sheets From the Primary (Main) Tray Suspended Automatically ..... 8-30 8.5.2 To Suspend the Output Manually ....................8-31 8.5.3 Taking Out Printed Sheets From the Secondary (Sub) Tray Suspended Automatically....8-32 bizhub PRESS 1250/1052 Contents-4...
Page 6 Outputting a Job with Mismatched Paper Size ................9-25 9.3.8 Changing Reserved Job to Suspended Job..................9-26 9.3.9 Deleting Reserved Job........................9-26 Checking Output/Send/Incomplete History ................9-28 9.4.1 Displaying Output History ........................ 9-28 9.4.2 Displaying Send History........................9-30 9.4.3 Checking Incomplete History......................9-32 bizhub PRESS 1250/1052 Contents-5...
Page 7 Troubleshooting Tips........................11-31 Maintenance 12.1 Cleaning ............................12-2 12.1.1 Cleaning the ADF scanning glass ....................12-2 12.1.2 Cleaning the Original Glass......................12-2 12.1.3 Cleaning the ADF Guide Cover......................12-2 12.1.4 Cleaning the Exterior of the Machine....................12-3 bizhub PRESS 1250/1052 Contents-6...
Page 8 Copy Conditions Incompatible with Basic Settings, Quality Adjustments, and Original Settings. 13-19 13.3.2 Copy Conditions Incompatible with Output Settings ..............13-24 13.3.3 Copy Conditions Incompatible with Applications................13-29 Index 14.1 Index by item ..........................14-2 14.2 Index by button..........................14-4 bizhub PRESS 1250/1052 Contents-7...
Page 9: Introduction
Introduction...
Page 10: Welcome
PageScope Web Connection • Web Utilities [User's Guide - Printer] This guide describes the settings of the printer drivers and utility tools. • PCL driver • PS Plug-in driver • PS PPD driver • PageScope Web Connection bizhub PRESS 1250/1052...
Page 11: User's Guide
Note that basic technical knowledge about the product is required to enable users to perform maintenance work or troubleshooting operations. Limit your maintenance and troubleshooting operations to the areas ex- plained in this manual. Should you experience any problems, please contact your service representative. bizhub PRESS 1250/1052...
Page 12: Conventions Used In This Manual
This format number represents the order of serial steps. % This symbol indicates a supplementary explanation of a pro- cedural instruction. This symbol indicates transition of the control panel to access a desired menu item. The relevant page is shown. bizhub PRESS 1250/1052...
Page 13: Original And Paper Indications
T v, and T w in this manual. -> 8.5 × 11T v, 8.5 × 11 -> 8.5 × 11T w Example: 8.5 × 11 bizhub PRESS 1250/1052...
Page 14: Portrait Original And Landscape Original
Portrait original refers to the original fed in horizontal or landscape ori- entation v, when placed to be read normally. Landscape original refers to the original fed in vertical or portrait ori- entation w, when placed to be read normally. bizhub PRESS 1250/1052...
Page 15: Preparation For Use
Preparation for Use...
Page 16: Machine Configuration
Machine Configuration Preparation for Use Machine Configuration 2.1.1 External Machine Items bizhub PRESS 1250/1052...
Page 17 Connected with an Ethernet cable to operate the ma- TX, 1000 Base-T) chine, or to use the machine as a network print- er/scanner. Dehumidifier heater switch Turns on/off the dehumidifier heater of the main body. Power cord Supplies the main body with electric power. bizhub PRESS 1250/1052...
Page 18: Internal Machine Items
Machine Configuration 2.1.2 Internal Machine Items bizhub PRESS 1250/1052...
Page 19 Also, putting your hand or arm between the main body and conveyance fusing unit may cause unexpected accidents. Please do not try to work yourself, but con- tact your service representative. bizhub PRESS 1250/1052...
Page 20: Control Panel Layout
Used to enter a user/account password to gain us- er/account authentication. Also sets the machine to allow the operation only when the next user is authen- ticated, if user authentication or account track func- tion is activated and an authenticated user has used the machine. bizhub PRESS 1250/1052...
Page 21 [Power off in progress / Please do not turn the main power off] Turning off the main power switch with these messages displayed may cause machine trouble such as toner fixation. Reference See page 2-51 for how to turn off the power. bizhub PRESS 1250/1052...
Page 22: Adf (Automatic Document Feeder)
Machine Configuration 2.1.4 ADF (Automatic Document Feeder) bizhub PRESS 1250/1052...
Page 23 Vertical size guide Measures the original size in vertical direction. 7 CAUTION DO NOT insert your fingers into the two ADF hinge portions. Otherwise, you may be injured. Please be careful when opening or closing the ADF. bizhub PRESS 1250/1052...
Page 24: Standard/Optional Equipment
Machine Configuration 2.1.5 Standard/Optional Equipment bizhub PRESS 1250 must have RU-510 attached. Attaching RU-510 is optional for bizhub PRESS 1052; however, RU-510 is requisite for the machine with PI-PFU attached. bizhub PRESS 1250/1052 2-10...
Page 25 Machine Configuration bizhub PRESS 1250 must have RU-510 attached. Attaching RU-510 is optional for bizhub PRESS 1052; however, RU-510 is requisite for the machine with PI-PFU attached. bizhub PRESS 1250/1052 2-11...
Page 26 Machine Configuration bizhub PRESS 1250 must have RU-510 attached. Attaching RU-510 is optional for bizhub PRESS 1052; however, RU-510 is requisite for the machine with PI-PFU attached. bizhub PRESS 1250/1052 2-12...
Page 27 Machine Configuration bizhub PRESS 1250 must have RU-510 attached. Attaching RU-510 is optional for bizhub PRESS 1052; however, RU-510 is requisite for the machine with PI-PFU attached. bizhub PRESS 1250/1052 2-13...
Page 28 Machine Configuration bizhub PRESS 1250 must have RU-510 attached. Attaching RU-510 is optional for bizhub PRESS 1052; however, RU-510 is requisite for the machine with PI-PFU attached. bizhub PRESS 1250/1052 2-14...
Page 29 Machine Configuration When bizhub PRESS 1250/1052 has GP-501 attached, it also needs to have RU-510 attached. bizhub PRESS 1250/1052 2-15...
Page 30 Machine Configuration bizhub PRESS 1250 must have RU-510 attached. Attaching RU-510 is optional for bizhub PRESS 1052; however, RU-510 is requisite for the machine with PI-PFU attached. bizhub PRESS 1250/1052 2-16...
Page 31: Paper Feeder Unit Pf-703
Machine Configuration 2.1.6 Paper Feeder Unit PF-703 bizhub PRESS 1250/1052 2-17...
Page 32 Opens leftward for removal of mishandled paper. Lever [PF1] Opens downward for removal of mishandled paper. Lever [PF2] Opens downward for removal of mishandled paper. Upper tray vertical conveyance door Opens leftward for removal of mishandled paper. bizhub PRESS 1250/1052 2-18...
Page 33: Paper Feeder Unit Pf-706
Machine Configuration 2.1.7 Paper Feeder Unit PF-706 bizhub PRESS 1250/1052 2-19...
Page 34 Opens leftward for removal of mishandled paper. Lever [PF1] Opens downward for removal of mishandled paper. Lever [PF2] Opens downward for removal of mishandled paper. Upper tray vertical conveyance door Opens leftward for removal of mishandled paper. bizhub PRESS 1250/1052 2-20...
Page 35: Large Capacity Post Inserter Pi-Pfu (Pf-703 + Pi-Pfu Kit Fa-501)
Machine Configuration 2.1.8 Large Capacity Post Inserter PI-PFU (PF-703 + PI-PFU Kit FA-501) bizhub PRESS 1250/1052 2-21...
Page 36 Opens leftward for removal of mishandled paper. Lever [PF1] Opens downward for removal of mishandled paper. Lever [PF2] Opens downward for removal of mishandled paper. Upper tray vertical conveyance door Opens leftward for removal of mishandled paper. bizhub PRESS 1250/1052 2-22...
Page 37: Relay Unit Ru-509 (Humidifier Hm-102)
Machine Configuration 2.1.9 Relay Unit RU-509 (Humidifier HM-102) bizhub PRESS 1250/1052 2-23...
Page 38 Turned counterclockwise for removal of mishandled paper. Handle [HM5] Opens upward for removal of mishandled paper. Humidifier tank Supplied with water for humidification. Humidifier tank cap Opens to allow supply of water to the humidifier tank. bizhub PRESS 1250/1052 2-24...
Page 39: Relay Unit Ru-510
Turned to allow removal of mishandled paper. Jam position display Indicates the position of mishandled paper by LED lamps. Knob [RU3] Turned clockwise to allow removal of mishandled pa- per. Lever [RU4] Opens rightward for removal of mishandled paper. bizhub PRESS 1250/1052 2-25...
Page 40: Folding Unit Fd-503
Machine Configuration 2.1.11 Folding Unit FD-503 bizhub PRESS 1250/1052 2-26...
Page 41 Turned to ease removal of mishandled paper inside the folding unit. Lever [FD12] Opens upward to allow removal of mishandled paper inside the folding unit. Lever [FD15] After the lever [FD16], opens leftward to allow removal of mishandled paper inside the folding unit. bizhub PRESS 1250/1052 2-27...
Page 42: Saddle Stitcher Sd-506
Machine Configuration Name Description Lever [FD16] Opens leftward to allow removal of mishandled paper inside the folding unit. Knob [FD5] Turned counterclockwise to ease removal of mishan- dled cover paper. 2.1.12 Saddle Stitcher SD-506 bizhub PRESS 1250/1052 2-28...
Page 43 Opens upward for removal of mishandled paper. Stapling unit Staples folded sets. Knob [SD15] Turned clockwise to feed mishandled paper. Lever [SD5] Opens leftward for removal of mishandled paper. Lever [SD4] Opens downward for removal of mishandled paper. bizhub PRESS 1250/1052 2-29...
Page 44: Perfect Binder Pb-503
Machine Configuration 2.1.13 Perfect Binder PB-503 bizhub PRESS 1250/1052 2-30...
Page 45 Carries perfect-bound books out from Perfect Binder PB-503. Book stopper Inserted to an appropriate stopper positioning hole to prevent output books from collapsing during portage. Book holding plate lever Moved to align the book holding plate to output books. bizhub PRESS 1250/1052 2-31...
Page 46 Machine Configuration Conveyance section Name Description Conveyance section cover Opens to allow removal of mishandled paper when paper jam indicator lights. Knob [PB14] Turned counterclockwise to feed mishandled paper. bizhub PRESS 1250/1052 2-32...
Page 47 DO NOT touch the glue tank unit. The internal glue tank unit is very hot. If you touch them, you may get burned. Please be especially care- ful when you push the glue tank unit backward in place. bizhub PRESS 1250/1052 2-33...
Page 48: Large Capacity Stacker Ls-505
Machine Configuration 2.1.14 Large Capacity Stacker LS-505 bizhub PRESS 1250/1052 2-34...
Page 49 Lever [LS5] Opens downward for removal of mishandled paper. Carriage Carries output sheets together with the stacker. Paper holder Mounted with paper stopper for holding output sheets. Paper stopper Holds output sheets to prevent them collapsing. bizhub PRESS 1250/1052 2-35...
Page 50: Finisher Fs-532 (Punch Kit Pk-522 + Saddle Stitcher Sd-510 + Post Inserter Pi-502)
Punch Kit PK-522. For the machine mounted with Saddle Stitcher SD-510, opens to allow staple supply for saddle stitching or removal of mishandled paper from the saddle stitcher. bizhub PRESS 1250/1052 2-36...
Page 51 Upper tray guides Aligned to cover sheets to fix the position. Upper tray Holds cover sheets. Lower tray Holds cover sheets. Lower tray guides Aligned to cover sheets to fix the position. bizhub PRESS 1250/1052 2-37...
Page 52 Machine Configuration bizhub PRESS 1250/1052 2-38...
Page 53 Handling the stacker forcibly while locked may break the vertical alignment plate on it. In either case, turn Knob [FS8]. It will release the lock to allow for subsequent operations. bizhub PRESS 1250/1052 2-39...
Page 54 Lever [SD7] Opens upward for removal of mishandled paper after pulling out the saddle unit. Lever [SD2] Opens rightward for removal of mishandled paper af- ter pulling out the saddle unit. bizhub PRESS 1250/1052 2-40...
Page 55: Removable Hdd Kit Rh-101
Used to externally install an HDD for main body and HD-511) for image controller. HDD for image controller Hard disk to be externally mounted for the image con- troller. HDD for main body Hard disk to be externally mounted for the main body. bizhub PRESS 1250/1052 2-41...
Page 56: Authentication Unit (Ic Card Type) Au-201
The use with other authentication devices is not guaranteed. In order to incorporate improvements in the product, specifications concerning this product are subject to change without notice. Do not store the IC card within 1.57 inches of the card scanning area. bizhub PRESS 1250/1052 2-42...
Page 57: Multi Puncher Gp-501 (Die Sets Ds-501 To Ds-507)
Used to check the position of the die set blade moved by turning Knob [GP4] for replacement of the die set or removal of mishandled paper. Lever [GP6] Opens upper-leftward for removal of mishandled pa- per. Knob [GP8] Turned to allow removal of mishandled paper. bizhub PRESS 1250/1052 2-43...
Page 58 Machine Configuration Name Description Die set rack Stored with die sets. bizhub PRESS 1250/1052 2-44...
Page 59: Auto Ring Binder Gp-502
Machine Configuration 2.1.19 Auto Ring Binder GP-502 bizhub PRESS 1250/1052 2-45...
Page 60 Supplies power to the ring binder. NOTICE Keep the power switch turned on for the ring binder. Turning it off will not only deactivate this machine but disable the bypass function to convey paper to the downstream finisher. bizhub PRESS 1250/1052 2-46...
Page 61 Machine Configuration bizhub PRESS 1250/1052 2-47...
Page 62 Paper stacker Aligns sheets to be bound, and delivers bound book- lets to the booklet tray. Binding section Binds a set of paper with a bind part. Take a look when trouble occurs on bind parts. bizhub PRESS 1250/1052 2-48...
Page 63: Turning On/Off The Power
The Wake-up Screen is displayed for a few seconds, followed by the Machine Screen with warm-up indications. The warmup takes approximately 7 minutes. % While the main body is warming up, a progress bar is displayed to indicate the warming-up status. bizhub PRESS 1250/1052 2-49...
Page 64 The message [Ready to print] appears on the Machine Screen to inform you that printing job is now available. % If a key counter or copy card is required, follow the instruction on the screen. bizhub PRESS 1250/1052 2-50...
Page 65: Turning Off The Power
For details of the setting, see Section 7 of the POD Administrator's Reference. Setting options Description Main Power Auto OFF Set- Turns OFF the main power switch automatically after the sub power ting switch is turned OFF and the main body is completely cooled down. bizhub PRESS 1250/1052 2-51...
Page 66: Continuing The Job The Next Day
To save the reserved/suspended job on the HDD of the main body, press [OFF After Storing Data]. The sub power switch will be turned off automatically after the data storing process is completed. When the sub power switch is turned on again, the data can be read from HDD to be output. bizhub PRESS 1250/1052 2-52...
Page 67 The job cannot be output again. When the job can be continued the next day and will not be continued: Press [Power OFF]. The data will not be stored and the sub power will be turned off automatically. bizhub PRESS 1250/1052 2-53...
Page 68 To do so, press the [Print a Set] key in the dialog displayed after pressing Stop on the control panel, if applicable. When printing the set is completed and the machine stops, the [Print a Set] key will disappear from the dialog. bizhub PRESS 1250/1052 2-54...
Page 69 Turning On/Off the Power Turn off the sub power switch. See page 2-52 for the procedure to follow. bizhub PRESS 1250/1052 2-55...
Page 70: Automatically Resetting The Machine: Auto Reset
The initial copy conditions can be specified on the Copy Initial Setting Screen accessed from the Utility Menu Screen. For details, see Section 7 of the POD Administrator's Reference. For selection of the time interval to activate Auto Reset or of the default screen, see Section 7 of the POD Administrator's Reference. bizhub PRESS 1250/1052 2-56...
Page 71: Manually Resetting The Machine: Reset
For copy conditions specified as Initial, see Section 7 of the POD Administrator's Reference. For copy conditions specified as Full Auto or common settings for the three optional settings, see Section 7 of the POD Administrator's Reference. See page 10-11 for programming of Mode Memory. bizhub PRESS 1250/1052 2-57...
Page 72: Using Machine When Power Save Led Lights
The Utility Menu Screen allows you to change the set period of time for Auto Low Power (to 1 minute, 3 min- utes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes). For details, see Section 7 of the POD Administrator's Reference. bizhub PRESS 1250/1052 2-58...
Page 73: Automatically Conserving Energy: Auto Shut Off
The machine is initially set to activate the Shut OFF mode manually. The Utility Menu Screen allows you to manually activate the Low Power mode instead. For details, see Section 7 of the POD Administrator's Refer- ence. bizhub PRESS 1250/1052 2-59...
Page 74: Limiting Machine Usage: Weekly Timer
5. Also, a number larger than 60 is unavailable for minute. When the machine operation is finished within the set period of time, hold down Power Save on the control panel for over a second. The machine returns to OFF condition. bizhub PRESS 1250/1052 2-60...
Page 75: Making User Authentication/Account Track
% If [User List] is displayed on the screen, press the key to display the user list. Select the desired key on the list and press [OK]; the selected user name will be displayed on the right side of [User Name] on the user authentication screen. bizhub PRESS 1250/1052 2-61...
Page 76 % If [Account List] is displayed on the screen, press the key to display the account list. Select the de- sired key on the list and press [OK]; the selected account name will be displayed on the right side of [Account Name] on the account authentication screen. bizhub PRESS 1250/1052 2-62...
Page 77: User Authentication Using Ic Card
The machine can be set to authenticate a user by holding an IC card over Authentication Unit (IC Card Type) AU-201. In this case, the machine may also be set to require an entry of user password for au- thentication. bizhub PRESS 1250/1052 2-63...
Page 78 IC cards previously used. The same IC card cannot be registered for different users. The card information registered with the IC card can be deleted. Select [Auth. Device]. % If [Password] appears clear, press [Password]. bizhub PRESS 1250/1052 2-64...
Page 79: User Authentication Using External Server
[Public User] in the upper right area of the authentication screen. The administrator specifies the func- tions available for public users and the upper limit for output. The administrator configures the external server to gain access for authentication. Contact your admin- istrator for details. bizhub PRESS 1250/1052 2-65...
Page 80 % Press [Public User], if displayed in the upper right area of the screen as shown below. The external server can be accessed without making any entry required for authentication. Press [OK], or press Access on the control panel. bizhub PRESS 1250/1052 2-66...
Page 81 % When the reset function is activated, the Machine Screen will be displayed. You need to gain au- thentication again when accessing screens that require authentication. When machine operation is completed, press Access on the control panel. The authentication screen will be displayed and it will no longer accept any operation. bizhub PRESS 1250/1052 2-67...
Page 82: Displaying Operation Guide: Help Message
% It does not matter to proceed to the next operation with the help message displayed on the screen. % To clear the help message, press [ ] on the screen or Help on the control panel. bizhub PRESS 1250/1052 2-68...
Page 83 ] on the Machine Screen, or press Help on the control panel. Press [Consumable/Scrap] at the lower-right corner of the help message area. Press the desired tab to check the supply/disposal procedure. % Another section is provided to describe the supply/disposal procedure. For details, see Section 5. bizhub PRESS 1250/1052 2-69...
Page 84 % It does not matter to proceed to the next operation with the help message displayed on the screen. % To clear the help message, press [ ] on the screen or Help on the control panel. bizhub PRESS 1250/1052 2-70...
Page 85: Adjusting Response Time Of Touch Keys: Accessibility
To deactivate this function, hold down Accessibility on the control panel for over a second. The Accessibility LED goes off, and normal response time will be restored in touch key operation. bizhub PRESS 1250/1052 2-71...
Page 86: Paper And Original Information
Paper and Original Information...
Page 87: Paper Information
14 to 53 lb Bond 732) (equipped in Finisher FS-532 as option) NOTICE Be sure to use paper only of the weight specified for each tray. Otherwise, print quality may be deteriorated or machine trouble may occur. bizhub PRESS 1250/1052...
Page 88 Straight delivery: 11 to 93 lb Bond 1-ply reversing delivery: 11 to 80 lb Bond 2-ply reversing delivery: 11 to 68 lb Bond (11 to 57 lb Bond for bizhub PRESS 1250) Multi Puncher GP-501 20 to 57 lb Bond (80 lb Cover)
Page 89: Paper Tray/Exit Tray Capacity
21-30 sheets stapled: 30 sets 31-40 sheets stapled: 25 sets 41-50 sheets stapled: 20 sets 51-60 sheets stapled: 15 sets 61-100 sheets stapled: 10 sets See the table on page 3-6 for the maximum number of stapled sheets per set. bizhub PRESS 1250/1052...
Page 90 However, it is preferable to keep the following limits in order to prevent the books from collapsing: 10 to 30-sheet bound books: 50 sets 31 to 150-sheet bound books: 35 sets or full load 151 to 300-sheet bound books: Full load Conveyance sec- Unlimited tion bizhub PRESS 1250/1052...
Page 91 44 to 57 lb Bond 58 to 65 lb Bond 66 to 80 lb Bond 81 to 93 lb Bond Even though a stapled set keeps within the capacity mentioned above, be sure not to exceed 23 mm in thick- ness. bizhub PRESS 1250/1052...
Page 92 17 to 20 lb Bond 21 to 24 lb Bond 25 to 36 lb Bond 37 to 43 lb Bond 44 to 57 lb Bond 58 to 65 lb Bond 66 to 80 lb Bond 81 to 93 lb Bond bizhub PRESS 1250/1052...
Page 93: Paper Size
8.5 × 14 w (8.5 e 14 w selected by default) *: The postcard adapter (option) is required to load post- cards into the main body trays (tray 1, tray 2). Contact your service representative, if desired. bizhub PRESS 1250/1052...
Page 94 Cover tray of Perfect Binder PB-503 Length (head to foot): Same as that of body set Width: Twice the book width + body set’s thickness + 5 mm (trimming width) or more Max. 12.06" × 18.55" to min. 5.46" × 10.96" bizhub PRESS 1250/1052...
Page 95 SRA4 w/v, A4 w/v, B5 v, A5 v, Foolscap Custom: min. 7.98" × 5.46" to max. 12.76"* × 18.23" *: Max. 12.57" in length for parallel stapling (in the back). Wide Paper Tab Paper (only with the tab side ahead in output direction) bizhub PRESS 1250/1052 3-10...
Page 96 8.5 × 11 w/v, 5.5 × 8.5 v, 9 × 11 v, SRA3 w, A3 w, B4 w, tray SRA4 w/v, A4 w/v, B5 w/v, A5 v, Foolscap Custom: max. 13.00" × 19.17" to min. 3.73" × 5.46" Wide Paper Tab Paper (only with the tab side ahead in output direction) bizhub PRESS 1250/1052 3-11...
Page 97: Auto Tray Switch (Ats) Function
When the selected paper tray becomes empty while printing is in progress, the machine automatically switch- es the paper tray source to continue printing without interruption only if there is another tray that meets the following conditions: The same size in the same orientation The same paper type bizhub PRESS 1250/1052 3-12...
Page 98 In [02 Auto Tray Switch ON/OFF], set the ATS function to ON. In [03 ATS Setting], select whether to keep up feeding from the current tray selected by ATS, or to return to the tray used till it becomes empty, when that tray is supplied with paper. bizhub PRESS 1250/1052 3-13...
Page 99: To Store Paper
Using damp paper may cause a paper misfeed. Keep partially used packages tightly wrapped during storage. Do not place paper packages vertically to store. Paper curl due to the vertical storage may cause a pa- per misfeed. Do not leave paper in a place within easy reach of children. bizhub PRESS 1250/1052 3-14...
Page 100: Original Information
Feedable original sizes: Max. 11.67 inches × 16.97 inches to min. 5.03 inches × 5.49 inches Detectable original sizes: 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 v, A3 w, B4 w, A4 w/v, B5 w/v bizhub PRESS 1250/1052 3-15...
Page 101: Originals For Using Original Glass
Original weight: 15 lb or less Original thickness: 1.18 inches or less 7 CAUTION Do not place too heavy originals. Do not also press strongly when thick original is placed. The original glass may be broken and you may be injured. bizhub PRESS 1250/1052 3-16...
Page 102: Before Making Copies
Before Making Copies...
Page 103: Machine Screen
[SCAN] tab Pressed to display the screen for the scan operations. For details, see [User's Guide - Network Scanner]. [STORE] tab Pressed to specify a location to store scanned data. For details, see [User's Guide - Network Scanner]. bizhub PRESS 1250/1052...
Page 104 Pressed to register or delete a custom size. [Paper Set Reg./Del.] Pressed to register or delete a paper setting. [Controller] Press to configure the controller. [Adjustment] Press to adjust the main body and the optional equip- ments. bizhub PRESS 1250/1052...
Page 105: Settings On The Machine Screen
4.1.2 Settings on the Machine Screen The following keys are provided at the bottom of the Machine Screen: [Tray Setting], [Both Sides Adjust], [Ad- justment], [Controller], [Paper Set Reg./Del.], and [Custom Reg./Del.]. bizhub PRESS 1250/1052...
Page 106 You can make adjustments on the zoom and position for images printed on the front and back sides of paper loaded in each tray (tray 1 to tray 8). Press [OK] to complete the setting and return to the Machine Screen. Reference For details of Both Sides Adjust, see Section 4 of the POD Administrator's Reference. bizhub PRESS 1250/1052...
Page 107 Press [Controller] to display the Controller Setting Menu Screen. You can configure the controller settings on this screen. Press [Close] to restore the Machine Screen. Reference For details of controller settings, see Section 6 of the POD Administrator's Reference. bizhub PRESS 1250/1052...
Page 108 You can register or delete a custom size of paper on this screen. Press [Close] to complete the setting and return to the Machine Screen. Reference For details on registering/deleting a custom size, see Section 3 of the POD Administrator's Reference. bizhub PRESS 1250/1052...
Page 109: Copy Screen
Among the functions provided on the Quality Adjust- ment Screen, the density setting can be made also using the keys displayed below. [JOB LIST] tab Pressed to display the Job List Screen which allows you to do the job management. bizhub PRESS 1250/1052...
Page 110 6 or more indicators are required, large icons will substitute up to 4th indica- tors, and small icons will be used from the 5th. [Image Rotation OFF] Pressed to activate/deactivate the Image Rotation function. bizhub PRESS 1250/1052...
Page 111 Selects the direction of the original placed on ADF or the original glass. [Separate Scan] Pressed to temporarily store the scanned images in memory. Message area Displays messages concerning the status of the ma- chine or operation currently required. bizhub PRESS 1250/1052 4-10...
Page 112: How To Make A Basic Copy
Job List Screen. In both cases, you can display the Copy Screen by pressing the [COPY] tab. % The Copy Screen is displayed from the beginning if it is specified as the default screen. bizhub PRESS 1250/1052 4-11...
Page 113 % [Image Rotation OFF]: See page 6-56. % [Application]: See page 7-2. % [Output Setting]: See page 8-2. Enter the desired print quantity from the control panel keypad. The entered quantity will be displayed on the Copy Screen. bizhub PRESS 1250/1052 4-12...
Page 114 Copy Screen. The count and set quantities are displayed at the upper right corner of both screens. The current job is displayed in the job list on the Job Active/Suspend List Screen of the Job List Screen. bizhub PRESS 1250/1052 4-13...
Page 115 See Section 7 of the POD Administrator's Reference for how to select the default screen to be displayed after the power is turned on. You can change the operation order of reserved jobs, or to cancel unused reserved jobs on the Job List Screen. See page 9-2 for details. bizhub PRESS 1250/1052 4-14...
Page 116: Positioning The Original
ADF. Position the original FACE UP (with page one UP). Place mixed-size originals aligned with the left rear side of the ADF. Up to 100 sheets of the original can be set at a time. bizhub PRESS 1250/1052 4-15...
Page 117: Positioning The Original On Original Glass
Use the original glass when the original is not suitable for use with the ADF, e.g., when size is incompatible, or when the original is folded, stapled, torn, or in generally poor condition. Reference See page 3-16 for details on the originals that cannot be loaded in the ADF. Open the ADF. bizhub PRESS 1250/1052 4-16...
Page 118 Application Screen, the ADF should be kept open while scanning the original. NOTICE Do not open the ADF once you close the ADF. The selected copy conditions may be altered automatically. Gently close the ADF to prevent the original from shifting on the glass. bizhub PRESS 1250/1052 4-17...
Page 119: Setting Print Quantity
Press C on the control panel. The quantity displayed on the Copy Screen will return to [0001]. Enter the new quantity from the control panel keypad. The entered print quantity will be displayed on the Copy Screen. bizhub PRESS 1250/1052 4-18...
Page 120: Setting Job During Warm-Up
FACE DOWN on the original glass. Set the desired copy conditions, and enter the print quantity. Press Start on the control panel. When scanning of the original for the job is started, a dialog will appear on the Copy Screen. bizhub PRESS 1250/1052 4-19...
Page 121 % Press [No] to return to the screen which is currently specified as the default screen. % If the Copy Screen is the default screen, only the [Close] key will be displayed in the dialog. Press this key to return to the Copy Screen. bizhub PRESS 1250/1052 4-20...
Page 122: To Stop Scanning/Printing
The current machine operation will be suspended, and a dialog will be displayed on the Copy Screen. Select the desired operation. The following two keys are displayed. % Press [Cancel Job] to cancel the job. Pressing this key deletes all the scanned data. % Press [Continue] to complete the job. bizhub PRESS 1250/1052 4-21...
Page 123 % Press [Print] to continue the job. % Press [Print a Set] to cancel the job after finishing the set currently output. % Press [Temporary Stop] to suspend the job. Press Start on the control panel to resume the job. bizhub PRESS 1250/1052 4-22...
Page 124 To Stop Scanning/Printing bizhub PRESS 1250/1052 4-23...
Page 125: Supplies And Disposals
Supplies and Disposals...
Page 126 5-43 for details. Disposing punch waste See the Help Screen and (when Punch Kit PK-522 page 5-45 for details. is mounted) Folding Unit FD-503 Disposing punch waste See the Help Screen and page 5-46 for details. bizhub PRESS 1250/1052...
Page 127: How To Display A Help Message
A help message for the Machine Screen will be displayed at the top of the screen. Press [Consumable/Scrap] at the lower-right corner of the help message area. Press the tab of the desired process. If [)] is displayed at the upper right of the screen, press it to display all the tabs. bizhub PRESS 1250/1052...
Page 128 Perform the process while pressing [+] or [,] to follow the steps. When the process is completed, press [ ] at the upper-right corner of the screen, or press Help on the control panel. The help message will disappear from the screen. bizhub PRESS 1250/1052...
Page 129: Replenishing Toner Supply
DO NOT THROW a toner bottle (including an empty one) into a fire! If thrown into a fire, toner may ignite and cause a dangerous situation. For handling an empty toner bottle, please contact your service representative. bizhub PRESS 1250/1052...
Page 130 Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Toner Supply] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052...
Page 131: Loading Paper
Lay a bundle of paper on a flat place to unwrap it. NOTICE Be careful not to fold or damage the paper while checking it. Check the stack for folds and damages, and remove the sheet that shows any trouble as illustrated be- low. bizhub PRESS 1250/1052...
Page 132 Loading Paper Folded Folded in the corner Pasted Folded along the edge bizhub PRESS 1250/1052...
Page 133: Loading Paper In Main Body Trays (Trays 1 And 2)
Withdraw the tray to be supplied with paper. NOTICE Trays cannot be withdrawn when the machine is not powered. Be sure to turn the sub power switch ON. Only one tray can be withdrawn at a time. bizhub PRESS 1250/1052...
Page 134 The paper level indicator of the tray will change from on the Machine Screen and Copy Screen. NOTICE Do not bump the tray into the main body. Otherwise, machine trouble may be caused due to unexpect- ed shock. bizhub PRESS 1250/1052 5-10...
Page 135: Loading Paper In Paper Feeder Unit Pf-703 (Trays 3 To 8)
% Place about 100 sheets of paper with the print side up. While pushing the lock release lever of the front side guide, align both side guides to the paper and position them according to the paper size indicator provided on the guide holding plate. a: Paper size indicator b: Lock release lever bizhub PRESS 1250/1052 5-11...
Page 136 The paper level indicator of the tray will change from on the Machine Screen and Copy Screen. NOTICE Do not bump the tray into the main body. Otherwise, machine trouble may be caused due to unexpect- ed shock. bizhub PRESS 1250/1052 5-12...
Page 137: Adjusting The Space Between The Side Guides Of Paper Feeder Unit Pf-703 (Trays 3 To 8)
% Pushing the lock release lever of the front side guide, move the side guides to align them to the pa- per. NOTICE Avoid making the space between the side guides too wide or too narrow for the paper to be seated straight. a: Lock release lever bizhub PRESS 1250/1052 5-13...
Page 138 Lower the bottom plate of the tray. % Turn the bottom plate fixing knob counterclockwise to loosen it, slide it to the back, and turn it clockwise to fix the plate. The bottom plate automatically goes down. bizhub PRESS 1250/1052 5-14...
Page 139: Loading Paper In Paper Feeder Unit Pf-706 (Trays 3 To 8)
11 lb Bond to 93 lb Bond paper. NOTICE Trays cannot be withdrawn when the machine is not powered. Be sure to turn the sub power switch ON. NOTICE Only one tray can be withdrawn at a time. bizhub PRESS 1250/1052 5-15...
Page 140 % Place about 100 sheets of paper with the print side up. While pushing the lock release lever of the front side guide, align both side guides to the paper and position them according to the paper size indicator provided on the guide holding plate. a: Paper size indicator b: Lock release lever bizhub PRESS 1250/1052 5-16...
Page 141: Loading Small Size Paper In Paper Feeder Unit Pf-703/Pf-706 (Trays 3 To 8)
When loading a paper size larger than the minimum width of the side guides, do not open the small size guides. Be sure to open small size guides as a pair when using the small size guides. Do not open only a half of them to load paper. bizhub PRESS 1250/1052 5-17...
Page 142 Open the small size guides provided for each of front and rear side guides. PF-703 PF-706 For Paper Feeder Unit PF-703, slide the two fixing levers of the paper control panels to the left to lock the panels. bizhub PRESS 1250/1052 5-18...
Page 143 Do not load above the limit level indicated on the small size guides. Move the side guides to align the small size guides to the paper. % Turn the guide fixing knobs of side guides counterclockwise to loosen them. PF-703 PF-706 bizhub PRESS 1250/1052 5-19...
Page 144 Do not bump the tray into the main body. Otherwise, loaded small size paper may be out of position and you may not obtain the desired print result. Also, machine trouble may be caused due to unexpect- ed shock. bizhub PRESS 1250/1052 5-20...
Page 145: Loading Paper In Large Capacity Post Inserter Pi-Pfu
% Place about 100 sheets of paper with the print side up. While pushing the lock release lever of the front side guide, align both side guides to the paper and position them according to the paper size indicator provided on the guide holding plate. a: Paper size indicator b: Lock release lever bizhub PRESS 1250/1052 5-21...
Page 146 The paper level indicator of the tray will change from on the Machine Screen and Copy Screen. NOTICE Do not bump the tray into the main body. Otherwise, machine trouble may be caused due to unexpect- ed shock. bizhub PRESS 1250/1052 5-22...
Page 147: Loading Paper In Post Inserter Of Folding Unit Fd-503
Load paper in the upper tray/lower tray of the post inserter. Align the side guides to the paper. NOTICE Do not load more than 200 sheets (22 lb Bond) or 1.18 inches in height for each of the upper tray and lower tray. bizhub PRESS 1250/1052 5-23...
Page 148: Loading Cover Paper For Perfect Binding
% Align it to the feed roller side. NOTICE Do not load above the limit level indicated on the side guide of the tray. Carefully load cover paper to be seated under the paper control lever at the air nozzle. bizhub PRESS 1250/1052 5-24...
Page 149 Be sure that the side guides and rear guide are securely aligned to the cover paper. Otherwise, a paper jam may be caused. When paper is seated properly, close the feed roller. Push in the cover tray until it locks into place. bizhub PRESS 1250/1052 5-25...
Page 150 Loading Cover Paper for Perfect Binding NOTICE Do not bump the tray into the main body. Otherwise, machine trouble may be caused due to unexpect- ed shock. bizhub PRESS 1250/1052 5-26...
Page 151: Loading Tabbed Paper
Carefully load paper to be seated under the paper control lever at the air nozzle. Move the side guides to the edge of tabbed paper. % Align the tabbed paper to the feed roller side of the tray. bizhub PRESS 1250/1052 5-27...
Page 152: Loading Tabbed Paper In Paper Feeder Unit Pf-703/Pf-706
Be sure that the side guides and rear guide are securely aligned to the tabbed paper. If 0.04 inches or more of a gap is found or tabbed paper skews in the tray, feeding trouble may be caused. Align the rear guide to tabbed paper. Push in the tray until it locks into place. bizhub PRESS 1250/1052 5-28...
Page 153 If the machine with the Needless Tab Paper Exit function set to [ON] stops the current job due to trouble such as a paper jam, a message will be displayed to prompt you to check that the tabbed paper is properly loaded for the next job to start with the 1st sheet. bizhub PRESS 1250/1052 5-29...
Page 154: Replenishing Staple Supply
Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Add Staples] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. bizhub PRESS 1250/1052 5-30...
Page 155: Replenishing Staple Supply In Finisher Fs-532 For Saddle Stitching
Follow the procedure below to add staples to the stapler in the saddle unit. Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Add Staples] tab at the top of the help message area. bizhub PRESS 1250/1052 5-31...
Page 156: Replenishing Staple Supply In Saddle Stitcher Sd-506
[Please add staples to right stapler of saddle stitcher] Also, the message [Staple Cartridge Supply] appears and its indicator lights in red in the Supply/Scrap Parts area of the Machine Screen. Follow the procedure below to add staples to the specified stapler. bizhub PRESS 1250/1052 5-32...
Page 157 Check that the top side of the staple cartridge is up. With the top side down, the staple cartridge cannot be inserted. Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Add Staples] tab at the top of the help message area. bizhub PRESS 1250/1052 5-33...
Page 158 Replenishing Staple Supply Perform the process while pressing [+] or [,] to follow the steps. Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-34...
Page 159: Adding Glue Pellets To Perfect Binder Pb-503
Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Glue Pellet] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. bizhub PRESS 1250/1052 5-35...
Page 160 Adding Glue Pellets to Perfect Binder PB-503 Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-36...
Page 161: Replenishing Water Supply In Humidifier Tank Of Relay Unit Ru-509
Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Water Tank] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. bizhub PRESS 1250/1052 5-37...
Page 162 Replenishing Water Supply in Humidifier Tank of Relay Unit RU-509 Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-38...
Page 163: Replenishing Bind Parts To Auto Ring Binder Gp-502
Please also refer to [OPERATION MANUAL] supplied with Auto Ring Binder GP-502 for the information on how to add bind parts. Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Bind Parts] tab at the top of the help message area. bizhub PRESS 1250/1052 5-39...
Page 164 Replenishing Bind Parts to Auto Ring Binder GP-502 Perform the process while pressing [+] or [,] to follow the steps. Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-40...
Page 165: Replacing Waste Toner Box
Follow the procedure below to replace the waste toner box. NOTICE Do not withdraw the waste toner box while printing is in progress. Otherwise, machine trouble may be caused. bizhub PRESS 1250/1052 5-41...
Page 166 Press the [Waste Toner] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-42...
Page 167: Disposing Staple Scraps
Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Stapler Scrap] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. bizhub PRESS 1250/1052 5-43...
Page 168 5.11 Disposing Staple Scraps Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-44...
Page 169: Disposing Punch Waste
Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Scrap (PK)] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. bizhub PRESS 1250/1052 5-45...
Page 170: Emptying Scrap Box Of Folding Unit Fd-503
Parts area of the Machine Screen. Follow the procedure below to empty the scrap box. Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Scrap (FD)] tab at the top of the help message area. bizhub PRESS 1250/1052 5-46...
Page 171: Emptying Scrap Box Of Multi Puncher Gp-501
[Punch-hole scrap box of multi puncher is full, please empty scrap box] Also, the message [Punch-Hole Scrap Box Full] appears and its indicator lights in red in the Supply/Scrap Parts area of the Machine Screen. bizhub PRESS 1250/1052 5-47...
Page 172 Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Scrap (GP)] tab at the top of the help message area. Perform the process while pressing [+] or [,] to follow the steps. bizhub PRESS 1250/1052 5-48...
Page 173: Emptying Scrap Box Of Auto Ring Binder Gp-502
Once withdrawing the scrap box from the ring binder, be sure to empty it. Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Scrap (GP)] tab at the top of the help message area. bizhub PRESS 1250/1052 5-49...
Page 174 5.12 Disposing Punch Waste Perform the process while pressing [+] or [,] to follow the steps. Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-50...
Page 175: Disposing Trimmings
Be sure to return the trim scrap box to its original position. Otherwise, the trimming function cannot be per- formed. Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Trim Scrap] tab at the top of the help message area. bizhub PRESS 1250/1052 5-51...
Page 176: Emptying Scrap Box Of Perfect Binder Pb-503
Be sure that the machine has stopped before opening the front door. Display the help message on the Machine Screen, then press [Consumable/Scrap]. Press the [Scrap(PB)] tab at the top of the help message area. bizhub PRESS 1250/1052 5-52...
Page 177 5.13 Disposing Trimmings Perform the process while pressing [+] or [,] to follow the steps. Reference For how to display the help message, see page 5-3. bizhub PRESS 1250/1052 5-53...
Page 178: Replacing Trim Receiver Of Saddle Stitcher Sd-506
The administrator can call for service from the Administrator Setting in the Utility mode. In this case, you do not have to make a call for preventive maintenance, because your machine has been monitored automatically by your service representative. bizhub PRESS 1250/1052 5-54...
Page 179: Basic Setting
Basic Setting...
Page 180: Original Setting
ADF. Or, select for the original posi- tioned on the original glass with the head (top) toward the right side of the original glass. Position the original. % See page 4-15 for details on positioning the original. bizhub PRESS 1250/1052...
Page 181: Specifying Bind Direction Of The Original: Bind Direction
Direction] in the Original Setting. Select [Right & Left] for normal copying. Reference To make top-bound duplex copies from side-bound simplex or duplex originals, select [Top] for [Bind Direc- tion] in the Output Setting. See page 8-8 for details. bizhub PRESS 1250/1052...
Page 182 Select [Top] in the [Bind Direction] area. % Without [2->2] or [2->1] selected in advance, the message [Binding mode selection is effective only in duplex mode] will be displayed, and the top binding setting will not function. bizhub PRESS 1250/1052...
Page 183 % Press [Default Set] to restore the initial settings of the Original Setting. Press [Cancel] to resume the previous setting. % Printing will not start without the Copy Screen displayed. Be sure to display the Copy Screen when you start printing. bizhub PRESS 1250/1052...
Page 184: Copying Mixed-Size Originals: Mixed
Position the original. Arrange mixed-size originals aligning the left and rear sides in the ADF. Press [COPY] tab to display the Copy Screen. Press [Original Setting]. The Original Setting Screen will be displayed. Select [Mixed] from under [Special]. bizhub PRESS 1250/1052...
Page 185: Copying Z-Folded Original: Z-Folded Original
Position the original in the ADF. Normal originals can be set together with the z-folded original. Press [COPY] tab to display the Copy Screen. Press [Original Setting]. The Original Setting Screen will be displayed. Select [Z-Folded Orig.] from under [Special]. bizhub PRESS 1250/1052...
Page 186: Feeding Single Original From Adf: Single Feed
ADF. The administrator is in charge of this setting. Contact your administrator to confirm the current setting. Procedure in normal Single Feed mode Press [COPY] tab to display the Copy Screen. Press [Original Setting]. The Original Setting Screen will be displayed. Select [Single Feed] from under [Special]. bizhub PRESS 1250/1052...
Page 187 Select additional copy conditions, then press Start. Procedure in Auto Start mode Press [COPY] tab to display the Copy Screen. Press [Original Setting]. The Original Setting Screen will be displayed. bizhub PRESS 1250/1052...
Page 188 Press [Separate Scan]. Select additional copy conditions, as desired. Adjust the original guides of the ADF. Without loading the original, adjust the original guides accord- ing to the original size to be loaded. bizhub PRESS 1250/1052 6-10...
Page 189: Copying Non-Standard Size Original: Custom Size
For details, see Section 3 of the POD Administrator's Reference. Position the original. Press [COPY] tab to display the Copy Screen. Press [Original Setting]. The Original Setting Screen will be displayed. Press [Custom Size]. bizhub PRESS 1250/1052 6-11...
Page 190 % Selecting from size keys: Select the desired standard size key. The machine scans the special size original as selected standard size. % Selecting [Full Area]: Select [Full Area] for small original that cannot be detected. % Selecting [Input Size]: bizhub PRESS 1250/1052 6-12...
Page 191 % Press the key [(2)] indicating widthwise dimension. Use the keypad, [,], or [+] on the screen to enter the desired numerical value. Available input range is from 5.51 inches to 16.97 inches in widthwise dimension. Proceed to step 5. bizhub PRESS 1250/1052 6-13...
Page 192 Select a registered size. % Select the desired name key, using [Next] and [Previous] as needed. % Press [OK] to return to the Input Size Screen. The recalled size will be displayed on the Input Size Screen. bizhub PRESS 1250/1052 6-14...
Page 193: Copying Tabbed Originals: Tab Paper Size
Position the original. Press [COPY] tab to display the Copy Screen. Press [Original Setting]. The Original Setting Screen will be displayed. Press [Tab Paper Size] provided under [Original Size]. The Tab Paper Size Screen will be displayed. bizhub PRESS 1250/1052 6-15...
Page 194 % Press [Default Set] to restore the initial settings of the Original Setting. Press [Cancel] to resume the previous setting. % Printing will not start without the Copy Screen displayed. Be sure to display the Copy Screen when you start printing. bizhub PRESS 1250/1052 6-16...
Page 195: Separate Scan Mode
Press [COPY] tab to display the Copy Screen. Set the desired copy conditions, then select [Separate Scan]. The Separate Scan mode will be activated. If this key is already highlighted, the [Separate Scan] mode has been activated automatically due to some copy selection. bizhub PRESS 1250/1052 6-17...
Page 196 % To delete the scanned data, press Stop on the control panel. % The memory indicator in the upper right area of the Copy Screen allows you to check the remaining memory. When scanning is completed, press [Scan Complete] on the dialog. bizhub PRESS 1250/1052 6-18...
Page 197 Enter the desired print quantity, then press Start on the control panel. All the data in memory will be output. Reference To suspend the printing job, press Stop on the control panel. See page 4-21 for details. bizhub PRESS 1250/1052 6-19...
Page 198: Quality Adjustment
Image Density Selection) are provided in [Function Setting] on the Utility menu. For details, see Section 7 of the POD Administrator's Reference. Position the original. Press [COPY] tab to display the Copy Screen. Select the desired density level using the setting keys provided under [Quality Adj.] bizhub PRESS 1250/1052 6-20...
Page 199: Adjusting Background Whiteness: Background Removal
Select the desired density level using the setting keys provided under [Background Removal]. % Press [Lighter] to make the background lighter than the original, or press [Darker] to make it darker. % Press [Standard] to resume the middle density level. bizhub PRESS 1250/1052 6-21...
Page 200: Making Copy Quality Closer To The Original: Original Type
Select to copy originals including both text and photo image. [Text/Photo] is specified as factory default. Dot Matrix Select to copy originals with low contrast such as penciled. This function increases the contrast to produce a sharp image. bizhub PRESS 1250/1052 6-22...
Page 201 Press [COPY] tab to display the Copy Screen. Press [Quality Adj.] The Quality Adjustment Screen will be displayed. Select the desired mode key from under [Original Type]. Press [OK] to complete the setting and return to the Copy Screen. bizhub PRESS 1250/1052 6-23...
Page 202: Adjusting Sharpness: Sharpness
Select the desired level using the setting keys provided under [Sharpness]. % Press [Smooth] to make the text and image outlines smoother, or press [Sharp] to make them sharp- % Press [Standard] to resume the standard level. bizhub PRESS 1250/1052 6-24...
Page 203: Adjusting Image Distinction Level: Text/Photo
Using the Text/Photo distinction function, the machine detects and determines the photo portion and text area of the scanned original, which allows you to obtain the optimum print result for each original. This section describes how to adjust the ratio in detecting the text/photo area. bizhub PRESS 1250/1052 6-25...
Page 204 % Press [Default Set] to restore the initial settings of the Quality Adjustment. Press [Cancel] to resume the previous setting. % Printing will not start without the Copy Screen displayed. Be sure to display the Copy Screen when you start printing. bizhub PRESS 1250/1052 6-26...
Page 205 Quality Adjustment Reference Making a proof copy allows you to view the output image and check the adjustment result. See page 10-2 for details. bizhub PRESS 1250/1052 6-27...
Page 206: Zoom
After changing the magnification ratio on the Zoom Screen, you can press Start on the control panel to start printing without returning to the Copy Screen. Reference You can change the setting of Vert./Horiz. Zoom (proportional) without displaying the Zoom Screen. See page 6-31 for details. bizhub PRESS 1250/1052 6-28...
Page 207 % Keep pressing arrow keys [,] or [+] to change the ratio in 0.001 (0.1%) steps at first, and then in 0.010 (1%) steps. % When the vertical and horizontal zoom ratios are specified, entered ratios will be displayed sepa- rately under Zoom on the Copy Screen. bizhub PRESS 1250/1052 6-29...
Page 208 % The upper two of the three Set Zoom Ratio keys can also be selected from the Copy Screen. Press [OK] to complete the setting and return to the Copy Screen. % Press [Cancel] to resume the previous setting. bizhub PRESS 1250/1052 6-30...
Page 209: Changing Magnification Ratio Using [-]/[+] On The Copy Screen
The Set Zoom Ratio registration is provided in [Function Setting] on the Utility menu. For details, see Section 7 of the POD Administrator's Reference. Press [COPY] tab to display the Copy Screen. Select the desired magnification ratio key from the two provided under [Zoom]. bizhub PRESS 1250/1052 6-31...
Page 210: Setting Magnification Ratio Automatically: Auto Zoom
The [Auto Zoom] provided under [Zoom] will be highlighted, and a proportional zoom ratio will be auto- matically determined and displayed on the screen. % The [Auto Zoom] will not be highlighted if you select a tray with [Custom] specified. bizhub PRESS 1250/1052 6-32...
Page 211: Simplex/Duplex Setting
The machine is set to automatically match the [Bind Direction] of the Output Setting to the [Bind Direc- tion] specified in the Original Setting. To make top-bound copies from side-bound originals, or to make side-bound copies from top-bound originals, specify [Bind Direction] in the Output Setting as desired. bizhub PRESS 1250/1052 6-33...
Page 212 For top-bound double-sided originals (printed upside down on back pages), select [Top] from under [Bind Direction]. Press [OK] to complete the setting and return to the Copy Screen. % See page 6-3 for details of [Bind Direction]. bizhub PRESS 1250/1052 6-34...
Page 213: Making Double-Sided Copies Using Original Glass
% Open the ADF. Position the first page of the original face down, then close the ADF. % When using Book Copy, No Image Area Erase, Auto Detect mode of Image Repeat, or Image Centering, keep the ADF open throughout the scanning procedure. Press [COPY] tab to display the Copy Screen. bizhub PRESS 1250/1052 6-35...
Page 214 Replace the original on the original glass with that of the back side image, then press Start on the con- trol panel. When scanning is completed, press [Scan Complete] on the dialog. Press Start on the control panel. bizhub PRESS 1250/1052 6-36...
Page 215: Making Single-Sided Copies From Double-Sided Originals
Position the original in the ADF. Press [COPY] tab to display the Copy Screen. Select [2->1] copy mode. Specify the direction of the original. % Select a key provided under [Direction] according to the orientation of the original in place. bizhub PRESS 1250/1052 6-37...
Page 216 Press [OK] to complete the setting and return to the Copy Screen. Select additional copy conditions, as desired. Press Start on the control panel. % You cannot output unless you return to the Copy Screen. Be sure to display the Copy Screen when you start printing. bizhub PRESS 1250/1052 6-38...
Page 217: Paper Presetting
Paper Tray Select the tray to be specified in Pa- Tray 1, Tray 2 (main body trays) per Presetting. Tray 3, Tray 4, Tray 5, Tray 6, Tray 7, Tray 8 (Paper Feeder Unit PF-703/PF- 706) bizhub PRESS 1250/1052 6-39...
Page 218 -10 to +10 (1 step = 0.05%) and back pages in duplex printing. Image Shift Up/Down: -100 to +100 (1 step = 0.1 mm) Image Shift Right/Left: -100 to +100 (1 step = 0.1 mm) bizhub PRESS 1250/1052 6-40...
Page 219 [Fine] for the tray loaded with paper having such characteristics as mentioned above. Plain The plain paper is used for copying/printing in general and is called "PPC pa- per," and is usually not recycled. Select [Plain] for the tray loaded with plain pa- per or recycled paper. bizhub PRESS 1250/1052 6-41...
Page 220: Outlines Of Paper Presetting Operation
Press [COPY] tab to display the Copy Screen. Check the settings made for each tray. % A tray key provides the information on paper size, weight, paper type or name, and remaining amount of loaded paper. bizhub PRESS 1250/1052 6-42...
Page 221 % Paper Presetting is available even when printing for another job is in progress. Change the paper size temporarily. % Press [Change Set] on the right side of [Paper Size] to display the Size Setting Screen. See page 6-45 for details on the setting procedure. bizhub PRESS 1250/1052 6-43...
Page 222 Screen to display the Change Individual Set Screen. See page 6-49 for details on the setting pro- cedure. Check the current settings displayed in the Paper Presetting list. Press [Close] on the Paper Presetting Screen to return to the Copy Screen. bizhub PRESS 1250/1052 6-44...
Page 223: Setting Paper Size: Standard
Press [Paper Presetting] on the Copy Screen to display the Paper Presetting Screen. Press a tray key provided under [Paper Tray] to select the tray to change the setting. Press [Change Set] on the right side of [Paper Size]. The Size Setting Screen will be displayed. Press [Custom]. bizhub PRESS 1250/1052 6-45...
Page 224: Setting Paper Size: Wide Paper
Section 3 of the POD Administrator's Reference. 6.6.6 Setting Paper Size: Wide Paper Press [Paper Presetting] on the Copy Screen to display the Paper Presetting Screen. Press a tray key provided under [Paper Tray] to select the tray to change the setting. bizhub PRESS 1250/1052 6-46...
Page 225 2, to a maximum of 18.19 inches. % Available range depends on the paper tray to be loaded. Press [Size Select] to return to the Size Select Screen. Press [OK] on the Size Setting Screen to return to the Paper Presetting Screen. bizhub PRESS 1250/1052 6-47...
Page 226: Setting Paper Size: Tab Paper
Press [(2)] to similarly enter the desired widthwise dimension, and [(3)] for the tab extension width. % If you specify the tab number here, press [Tab Number Setting], and then enter the desired number. bizhub PRESS 1250/1052 6-48...
Page 227: Setting Paper Conditions: Recall
"Recall" procedure, then modify the conditions as desired. Press [Paper Presetting] on the Copy Screen to display the Paper Presetting Screen. Press a tray key provided under [Paper Tray] to select the tray to change the setting. bizhub PRESS 1250/1052 6-49...
Page 228 Also, for Embossed 2, the weight can be specified only between 21 to 57 lb Bond. Press [Colored Paper]. The Colored Paper Screen will be displayed. % Select the desired colored paper key provided under [Colored Paper]. bizhub PRESS 1250/1052 6-50...
Page 229 [Up/Down], or [Right/Left] to select the adjustment item. Use the keypad, [,], or [+] on the screen to enter the desired adjustment value. Press [+<->-] to specify the adjustment value to be positive or negative. % For details on the adjustment procedure, see Section 4 of the POD Administrator's Reference. bizhub PRESS 1250/1052 6-51...
Page 230 Adjustment, please contact your service representative. % For details on the adjustment procedure, see Section 3 of the POD Administrator's Reference. Press [Mis-center Detect]. The Mis-centering Detection Screen will be displayed. % Select either [ON] or [OFF] from under [Mis-center Detect]. bizhub PRESS 1250/1052 6-52...
Page 231 The Double-feed Detection Screen will be displayed. % Select either [ON] or [OFF] from under "Dfeed Detection." Press [Skew Detect Set.]. The Skew Detection Setting Screen will be displayed. % Select [1.0%], [0.5%] or [OFF] from under "Skew Detect Set." bizhub PRESS 1250/1052 6-53...
Page 232 Section 3 of the POD Administrator's Reference. % For mechanical curl adjustment, select [+2], [+1], [0], [-1] or [-2]. For humidifier for curl adjustment, select [ON] or [OFF] for Humidifier Setting. Press [OK] to return to the Paper Presetting Screen. bizhub PRESS 1250/1052 6-54...
Page 233: Auto Paper
% Or, a message will prompt you that an appropriate size cannot be found in any tray. In this case, load paper of the size referred in the message. % Auto Paper may not function for the tray due to the paper conditions specified for that tray, even with the selected size loaded. bizhub PRESS 1250/1052 6-55...
Page 234: Image Rotation
Copy paper sizes: 8.5 × 11 w/v, 5.5 × 8.5 v, 8.5 × 14 w Original sizes: 11 × 17 w, 8.5 × 14 w, 8.5 × 11 w/v, 5.5 × 8.5 v Press [COPY] tab to display the Copy Screen. bizhub PRESS 1250/1052 6-56...
Page 235 Press [Image Rotation OFF]. The [Image Rotation OFF] key will be highlighted to indicate that this function is deactivated. Press [Image Rotation OFF] again. The [Image Rotation OFF] key will be deselected. Image Rotation is now activated. bizhub PRESS 1250/1052 6-57...
Page 236: Setting Reserve Job
At this point, pressing [COPY] tab will display the Copy Screen and allows you to make a reserve job setting. % If Copy Screen is specified as the default screen, the following dialog will be displayed. Press [Close] to return to the Copy Screen. bizhub PRESS 1250/1052 6-58...
Page 237 [JOB LIST] tab to display the Job List Screen. Printing on the reserve job will start automatically after completing the current job. Reference See page 9-2 for details of the job list. If any trouble occurs on a reserve job, see page 11-17. bizhub PRESS 1250/1052 6-59...
Page 238: Application Functions
Application Functions...
Page 239: To Use Application Function
Press Reset on the control panel to resume the initial setting for all copying features including application settings. Press [OK] on the Application Screen to return to the Copy Screen. bizhub PRESS 1250/1052...
Page 240: Display Under [Application] On The Copy Screen
For details on the setting procedure, see Section 7 of the POD Administrator's Reference. Icons Under the [Application] key on the Copy Screen, up to 6 icons of the application functions that you have set are displayed. bizhub PRESS 1250/1052...
Page 241: Bookmark
Pressing the item key which has the subsequent screen on the Application Screen. Pressing a shortcut key under [Application] on the Copy Screen. Changing the settings of that application function from the Mode Check Screen. bizhub PRESS 1250/1052...
Page 242: Inserting Sheets/Covers: Insert Sheet
A back cover cannot be simplex-copied. Back Cover + Blank A blank sheet for a back cover will be inserted as the last sheet of copied set, regardless of the simplex/duplex printing mode of the original or copy. bizhub PRESS 1250/1052...
Page 243 The 5th sheet (the 9th and 10th pages) of double-sided original is simplex- copied onto 2 insert sheets, which will be the 9th and 10th sheets of copied set. An insert sheet cannot be duplex-copied. Example: Selecting [Blank] with page [5] specified as insertion location bizhub PRESS 1250/1052...
Page 244 Check the tray information to see which type/size of paper is specified for each tray before loading pa- per. If a different type of paper is loaded into the tray, copying may not be completed or a malfunction may occur. bizhub PRESS 1250/1052...
Page 245 % Press [Change Set] on the right of [Front Cover] row to insert a front cover, or press [Change Set] on the right of [Back Cover] row to insert a back cover. The Front Cover Setting Screen bizhub PRESS 1250/1052...
Page 246 [Quantity Set] to specify the number on the keypad on the screen, then press [Fix]. NOTICE Paper for cover can be simultaneously fed from a main body tray and PI tray. In that case, the post in- serter feeds the first (front) cover and the last (back) cover. bizhub PRESS 1250/1052...
Page 247 On the upper left of the screen, [Set 001] is highlighted. % For a single set key, you can specify only one combination of printing/not printing, print side, and paper tray settings, while multiple insertion points can be specified. If another combination is nec- bizhub PRESS 1250/1052 7-10...
Page 248 % If PI Tray is selected for paper tray, specify the insert quantity. Press [Insert Quantity] to enter the desired number using the keypad on the screen. You can specify up to 40 sheets. bizhub PRESS 1250/1052 7-11...
Page 249 Press Start on the control panel. To print and attach back covers, scan all of the original and then output the data. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-12...
Page 250: Locating Title Pages On The Right Side: Chapters
[Print Insertion] of Chapters and Booklet cannot be used in combination. Booklet will be unavailable when [Print Insertion] of Chapters is selected. Similarly, [Print Insertion] will be unavailable when [Book- let] is selected. Position the original. Press [Application] on the Copy Screen. Press [Chapters] on the Application Screen. bizhub PRESS 1250/1052 7-13...
Page 251 % To use the Booklet function in combination, press [Booklet] on the right side of the screen, without selecting [Print Insertion] of Chapters. See page 7-20 for details on the setting procedure. Press [OK] on the Booklet Screen to return to the Chapters Screen. bizhub PRESS 1250/1052 7-14...
Page 252 Select additional copy conditions, as desired. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-15...
Page 253: Laying Out Several Pages Onto One Sheet: Combine
The page arrangement (numbering direction) can be specified. Horizontal order Vertical order 8 in 1 Select this setting to print eight original images onto one page. The page arrangement (numbering direction) can be specified. Horizontal order bizhub PRESS 1250/1052 7-16...
Page 254 Auto Zoom is automatically selected. Normally the fixed size of tray 1 will be selected (available to be changed manually). Position the original. Select [Direction] according to the orientation of the original in place. Original direction Direction keys bizhub PRESS 1250/1052 7-17...
Page 255 % To disable the function while keeping the current setting, press [Function OFF]. Press [OK] on the Application Screen to return to the Copy Screen. The Copy Screen will be restored with the Combine icon displayed under [Application]. Select additional copy conditions, as desired. bizhub PRESS 1250/1052 7-18...
Page 256 % Auto Zoom is selected. When you need to change the paper size, select the desired tray. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-19...
Page 257: Making A Multiple Page Signature Booklet: Booklet
Original Output ting tions Cover Sheet Left Bind Cover With Copy Sheet Left Bind Cover With Blank Sheet Left Bind Cover Sheet Right Bind Cover With Copy Sheet Right Bind Cover With Blank Sheet Right Bind bizhub PRESS 1250/1052 7-20...
Page 258 Press [Application] on the Copy Screen. Press [Booklet] on the Application Screen. The Booklet Screen will be displayed. Select the desired Binding Mode and Binding Position. % Press [Left Bind] or [Right Bind] if you want to change the output order. bizhub PRESS 1250/1052 7-21...
Page 259 % The paper tray for the body sets is automatically selected as default. If [Cover With Copy Sheet] or [Cover With Blank Sheet] was selected in step 6, two keys including the tray for covers are highlight- ed on the screen. bizhub PRESS 1250/1052 7-22...
Page 260 Section 7 of the POD Administrator's Reference. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-23...
Page 261: Inserting Different Original Images Into Printed Sets: Insert Image
% If the original count exceeds 100, divide them into blocks not exceeding 100 sheets, and load and scan the block with the first page. Press [Application] on the Copy Screen. Press [Insert Image] on the Application Screen. bizhub PRESS 1250/1052 7-24...
Page 262 % Press [Booklet] to use the Booklet function in conjunction with this function. See page 7-20 for de- tails on the setting procedure. Press [OK] on the Booklet Screen to return to the Insert Image Screen. bizhub PRESS 1250/1052 7-25...
Page 263 Press [Separate Scan] to exit the Separate Scan mode. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-26...
Page 264: Dividing Spread Image Into Right And Left Pages: Book Copy
Printed sets will be output in the order of the front cover page, divided doc- ument pages according to the pagination, then the back cover page. Using Booklet in combination: Use the Booklet function to make a booklet. Setting options Description No Cover + Booklet (Left Bind) bizhub PRESS 1250/1052 7-27...
Page 265 Up to 100 original sheets can be set. If the original count exceeds 100, divide them into blocks not exceeding 100 sheets, and load and scan the block with the first page. Press [Application] on the Copy Screen. Press [Book Copy] on the Application Screen. bizhub PRESS 1250/1052 7-28...
Page 266 Press [OK] on the Booklet Screen to return to the Book Copy Screen. Press [OK] to complete the setting. The setting will be confirmed and the Application Screen will be restored. % To restore the previous setting, press [Cancel]. bizhub PRESS 1250/1052 7-29...
Page 267 Press [Separate Scan] to exit the Separate Scan mode. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-30...
Page 268: Programming Different Settings For An Output Job: Program Job
Screen for the second job or later. Contact your service representative, if desired. Position the original of the first job. Press [Application] on the Copy Screen. Press [Program Job] on the Application Screen. The incompatible function keys will be grayed out to show inactivity. bizhub PRESS 1250/1052 7-31...
Page 269 Do not press [Conf. & Scan Fin.] until all job originals are scanned. % If the Staple mode has been selected in step 5, the [Conf. & Division] key is displayed in the dialog. To have each job stapled separately, press this key. bizhub PRESS 1250/1052 7-32...
Page 270 The output mode selected here will be applied to all jobs. % If you have selected the Staple mode in step 5 and specified to have each bunch stapled after every scanning, you do not need to select this option. bizhub PRESS 1250/1052 7-33...
Page 271 Enter the desired print quantity from the control panel keypad. The print quantity selected here will be applied to all jobs. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-34...
Page 272: Erasing Outside Area Of Original: No Image Area Erase
Select additional copy conditions, as desired. % The available copy modes are [1->1] and [1->2]. Selecting [1->2] automatically sets the Separate Scan mode. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. bizhub PRESS 1250/1052 7-35...
Page 273 The administrator can set the machine to obtain the optimum copy result of No Image Area Erase based on the working environment by adjusting the density level of the original manually. For details, see Section 7 of the POD Administrator's Reference. bizhub PRESS 1250/1052 7-36...
Page 274: Reversing Color In Image: Neg. Pos. Reverse
Select additional copy conditions, as desired. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-37...
Page 275: Repeating Original Image On One Sheet: Image Repeat
NOTICE In this case, No Image Area Erase is automatically selected. Make sure to keep the ADF open through- out the scan operation. Press [Application] on the Copy Screen. Press [Image Repeat] on the Application Screen. bizhub PRESS 1250/1052 7-38...
Page 276 With Keypad Screen. Press [(1) Vertical] or [(2) Horizontal], then enter the desired values for horizontal/vertical width from the keypad on the screen. Press [OK] to complete the setting and return to the Image Repeat Screen. bizhub PRESS 1250/1052 7-39...
Page 277: Specifying Repeat Times: Repeat
(2 Repeat, 4 Repeat, or 8 Repeat). Use 2 Repeat to repeat printing in the same direction and to have the same cut side when cutting copied sheets in two by reversing and repeating the image. bizhub PRESS 1250/1052 7-40...
Page 278 The Image Repeat Screen will be displayed. Select the desired Repeat mode. % Press [2 Repeat], [4 Repeat], or [8 Repeat]. % In the 2 Repeat mode, there are 2 additional options to specify the direction of the repeated image. bizhub PRESS 1250/1052 7-41...
Page 279 % Since Auto Zoom has been selected, select the desired tray and specify the paper size. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-42...
Page 280 2 Repeat: [R/D-Reverse] 2 Repeat: [L/U-Reverse] Landscape original Repeated images Landscape original Repeated images Portrait original Repeated images Portrait original Repeated images bizhub PRESS 1250/1052 7-43...
Page 281: Eliminating Copy Marks Along Borders: Frame Center Erase
When lowering the ADF onto thick original (e.g. open book) placed on the original glass, do not press it down too hard. Keep the ADF open, if required. Press [Application] on the Copy Screen. Press [Frame Center Erase] on the Application Screen. bizhub PRESS 1250/1052 7-44...
Page 282 % Select a side from the keys under [Erase Width Setting], then press the keypad, [,], or [+] on the screen to enter the width to be erased. % If [Center Erase] is also selected, select [Frame] under [Erase Width Setting] before entering each value. bizhub PRESS 1250/1052 7-45...
Page 283 Select additional copy conditions, as desired. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-46...
Page 284: Copying Image In The Center Of Copy Paper: Image Centering
Press [Application] on the Copy Screen. Press [Image Centering] on the Application Screen. The incompatible function keys will be grayed out to show inactivity. Press [OK] on the Application Screen to return to the Copy Screen. bizhub PRESS 1250/1052 7-47...
Page 285 % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. Reference Image Centering may not function properly if the lighting in the work place is directly over the original glass. In this case, consult your service representative about an appropriate place for installation. bizhub PRESS 1250/1052 7-48...
Page 286: Printing Images Fully To The Edges: All-Image Area
Position the original. % Both the ADF and original glass are available. Press [Application] on the Copy Screen. Press [All-image Area] on the Application Screen. The incompatible function keys will be grayed out to show inactivity. bizhub PRESS 1250/1052 7-49...
Page 287 Select additional copy conditions, as desired. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-50...
Page 288: Adjusting Position Of Copy Image: Page Margin - Shift
The value for Page Space can be entered from -9.82 inches to 9.82 inches (-250 mm to 250 mm). The value for Creep Adjustment can be entered from 0 to 1.96 inches (0 mm to 50 mm). Position the original. Display the Copy Screen and press the desired copy mode under [Simplex/Duplex]. bizhub PRESS 1250/1052 7-51...
Page 289 Press [Page Margin] on the Application Screen. The Page Margin Screen will be displayed. Press [Shift]. Select the side of copy paper to be adjusted with image position. % Press [Front Side], [Back Side], or [Double Sided] under [Image Side]. bizhub PRESS 1250/1052 7-52...
Page 290 % The value for Page Space can be entered from -9.82 inches to 9.82 inches (-250 mm to 250 mm). Enter the desired value, then press [+ <-> -] to specify the adjustment data to be positive or nega- tive. bizhub PRESS 1250/1052 7-53...
Page 291 Page Space function is available only when Booklet or 2 Repeat mode of Image Repeat has already been selected. Use this function to make the desired amount of blank space between the two images on a page. Booklet Page Space 2 Repeat mode of Image Repeat Page Space bizhub PRESS 1250/1052 7-54...
Page 292 Enter the creep amount of the images on the outermost page, while entering the page space amount of the images on the innermost page. Original Output Creep Adj.: Page Space (+): Creep Adj.: Page Space (-): bizhub PRESS 1250/1052 7-55...
Page 293: Reducing Images To Create Binding Margin: Page Margin - Reduce & Shift
Values for shift amount can be entered from 0 to 9.82 inches (0 to 250 mm) in 0.04 inches (1 mm) in- crements. Position the original. Display the Copy Screen and select the desired copy mode under [Simplex/Duplex]. bizhub PRESS 1250/1052 7-56...
Page 294 The Page Margin Screen will be displayed. Select [Reduce & Shift] and [Front Side]. % Press [Reduce & Shift] under [Page Margin Setting] and [Front Side] under [Image Side]. Specify the shift amount in the right direction. bizhub PRESS 1250/1052 7-57...
Page 295 Select additional copy conditions, as desired. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. % Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. bizhub PRESS 1250/1052 7-58...
Page 296: Printing Additional Information: Stamp
Setting options Description Preset Stamp Print the desired text from preset stamps onto the specified position. Set Numbering Print a sequential number onto the specified position. Page No. Print a page number onto the specified position. bizhub PRESS 1250/1052 7-59...
Page 297 There are 4 types of text and 3 types of background; select one from each category and use them in combination. Text: Copy Text: Invalid Text: Illegal copy Background: Blossoms Background: Arabesque Background: Lattice bizhub PRESS 1250/1052 7-60...
Page 298: Printing Stamp Onto Copies: Preset Stamp
Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. The Stamp/Overlay Screen will be displayed. Press [Preset Stamp]. The Preset Stamp Screen will be displayed. Select the desired stamp type, text size, print page and printing position. bizhub PRESS 1250/1052 7-61...
Page 299: Printing Distribution Number: Set Numbering
% Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. 7.17.2 Printing Distribution Number: Set Numbering Print a sequential number onto the specified position. Position the original. Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. bizhub PRESS 1250/1052 7-62...
Page 300 Select one of the 9 printing positions provided under [Printing Position]. If fine adjustment is desired, press [Fine Adjustment]. % See page 7-73 for details on fine adjustment of printing position, how to change the text size, and how to set the start number. bizhub PRESS 1250/1052 7-63...
Page 301: Printing Page Number
Print a page number onto the specified position. Position the original. Press [Application] on the Copy Screen. % When setting [Last Chapter Print] or [Page/Chapter Setting], specify every chapter title page in Chapters beforehand. Press [Stamp/Overlay] on the Application Screen. bizhub PRESS 1250/1052 7-64...
Page 302 Chapters beforehand. % See page 7-73 for details on fine adjustment of printing position, printing on the cover or insert sheet, setting the page number to start printing, and changing the text. bizhub PRESS 1250/1052 7-65...
Page 303: Printing Date/Time: Date/Time
% Printing will not start without the Copy Screen displayed. Please make sure to display the Copy Screen. 7.17.4 Printing Date/Time: Date/Time Print date and time onto the specified position. Position the original. Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. The Stamp/Overlay Screen will be displayed. bizhub PRESS 1250/1052 7-66...
Page 304 % To disable the function while keeping the current setting, press [Function OFF]. Press [OK] on the Application Screen to return to the Copy Screen. The Copy Screen will be restored with the Stamp/Overlay icon displayed under [Application]. bizhub PRESS 1250/1052 7-67...
Page 305: Printing Watermark Onto Copies: Watermark
Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. The Stamp/Overlay Screen will be displayed. Press [Watermark]. The Watermark Screen will be displayed. Select the desired watermark type, text density, and printing position. bizhub PRESS 1250/1052 7-68...
Page 306: Printing Sequential Number As Watermark: Set Numbering
7.17.6 Printing Sequential Number as Watermark: Set Numbering Print a numbering, a sequential number, in light color over the whole surface. Position the original. Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. bizhub PRESS 1250/1052 7-69...
Page 307 Press this key to select [20 point] or [36 point]. [Start Number] Press this key to specify the start number. [Text Density] Select one of the four text density keys. % See page 7-74 for details on how to set the start number. bizhub PRESS 1250/1052 7-70...
Page 308: Printing Watermark And Background Pattern: Copy Protect
The text size of watermark is 44 points. Printed position of watermark is the same as that of Set Numbering of Watermark. Position the original. Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. bizhub PRESS 1250/1052 7-71...
Page 309 Select the desired text and background pattern. Setting options Description [Text] Select one of the four text types. [Background] Select one of the three background patterns. % You cannot select only the text or background pattern. bizhub PRESS 1250/1052 7-72...
Page 310: Detailed Setting In Stamp
The adjustment range is 0 to 1.96 inches (0 to 50 mm), in lengthwise direction ([Top] or [Bottom]) and in width- wise direction ([Right] or [Left]). Select a direction key, then press the keypad, [,], or [+] to enter adjustment data. Press [OK] to complete the setting and return to the previous screen. bizhub PRESS 1250/1052 7-73...
Page 311 Press [OK] to complete the setting and return to the previous screen. Page cover and insert sheet When the Insert Sheet, Chapters, or Booklet function is also used, you can specify printing onto the covers and insert sheets (printed or blank). bizhub PRESS 1250/1052 7-74...
Page 312 Select the text size and font type. Press [OK] to complete the setting and return to the previous screen. Date/Time Use this function to change the date/time to be printed from the one configured for the machine to your de- sired time/date. bizhub PRESS 1250/1052 7-75...
Page 313 % You can enter numbers in the range from 1 to 99999 for Page No. and from 1 to 99 for Chapter. % Press [Clear] to reset the entered value to [1]. Entering [0] automatically sets the start number to [1]. Press [OK] to complete the setting and return to the previous screen. bizhub PRESS 1250/1052 7-76...
Page 314: Print Words, Date/Time, Annotation Number Onto Copies: Annotation
Annotation Screen after recalling the predefined setting (Tempo- rary Number Setting). Annotation can be used with other stamp functions, Preset Stamp and all types of Watermark, provided on the Stamp/Overlay Selection Screen in multiple combinations. Original Output 3 sets bizhub PRESS 1250/1052 7-77...
Page 315 Printing position can be selected from 9 options, and fine adjustment is available up to 1.96 inches (50 mm) both in up/down and right/left directions. Position the original. Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. bizhub PRESS 1250/1052 7-78...
Page 316 Select the desired Annotation type, then specify its printing position. % Press [,] or [+] to display and select a key to recall the desired setting. The annotation setting registered on that key will be displayed on the screen. bizhub PRESS 1250/1052 7-79...
Page 317 % To disable the function while keeping the current setting, press [Function OFF]. Press [OK] on the Application Screen to return to the Copy Screen. The Copy Screen will be restored with the Stamp/Overlay icon displayed under [Application]. bizhub PRESS 1250/1052 7-80...
Page 318 7.18 Print Words, Date/Time, Annotation Number onto Copies: Annotation Select additional copy conditions, as desired. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. bizhub PRESS 1250/1052 7-81...
Page 319: Overlaying Image Onto Printed Pages: Overlay
Auto Paper and Auto Zoom are canceled and [x1.0] magnification is selected automatically. Separate Scan mode is automatically selected. Select additional copy conditions, as desired. Press Start on the control panel. The machine starts scanning and the scanned image will be stored into memory. bizhub PRESS 1250/1052 7-82...
Page 320 % If the original count exceeds 100, repeat the procedures of steps 9 and 10 to scan all of the original. Press [Separate Scan] to exit the Separate Scan mode. Enter the desired print quantity from the control panel keypad. Press Start on the control panel. bizhub PRESS 1250/1052 7-83...
Page 321: Storing Overlay Image In Hdd And Overlaying The Stored Image: Registered Overlay
To store image for overlay: Position the overlaying original face down on the original glass. Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. The Stamp/Overlay Screen will be displayed. Press [Registered Overlay]. bizhub PRESS 1250/1052 7-84...
Page 322 % Use the screen keypad to enter the desired name. You can enter up to 8 characters. The date of the entry will be added to the name automatically. Press [OK]. The Copy Screen to store the overlaying image will be displayed. Select copy conditions, as necessary. bizhub PRESS 1250/1052 7-85...
Page 323 To overlay stored image onto each page: Press [Application] on the Copy Screen. Press [Stamp/Overlay] on the Application Screen. The Stamp/Overlay Screen will be displayed. Press [Registered Overlay]. The Registered Overlay Screen will be displayed. Select the desired overlaying image data. bizhub PRESS 1250/1052 7-86...
Page 324 Duplicate image names If an image with the same name as you entered already exists, the following confirmation dialog will be dis- played. Image names cannot be overwritten. Press [OK], then store the image with another name. bizhub PRESS 1250/1052 7-87...
Page 325 Storing Overlay Image in HDD and Overlaying the Stored Image: Registered Overlay Reference You can set the dialog above in the Administrator Setting on the Utility Menu Screen. For details, see Section 7 of the POD Administrator's Reference. bizhub PRESS 1250/1052 7-88...
Page 326: Output Setting
Output Setting...
Page 327: Making Output Setting
[STORE] tab and selecting [Scan to HDD] on the sub- sequent screen. For details, see [User's Guide - Network Scanner]. % Press [Cancel] to restore the previous setting. To restore the initial setting, press [Default Set]. bizhub PRESS 1250/1052...
Page 328: Selecting An Output Tray
See page 10-7 for details of Sample Print. 8.1.2 Selecting an Output Tray This section describes how to select an output tray. Position the original. Press [Output Setting] on the Copy Screen. The Output Setting Screen will be displayed. bizhub PRESS 1250/1052...
Page 329 With multiple units of Large Capacity Stacker LS-505 installed, the [Stacker Auto] key also appears. See page 8-5 for details. % Withdraw the saddle stitcher folder tray, if selected as an output tray. bizhub PRESS 1250/1052...
Page 330: Pile Allow], [Pile Restrict] And [Stacker Auto] Keys Of Large Capacity Stacker Ls-505
If the machine has Large Capacity Stacker LS-505 installed, [Pile Allow] and [Pile Restrict] appears on the Output Setting Screen. Press [Pile Allow] to highlight it if you allow paper from several jobs to pile up in the stacker, or press [Pile Restrict] if you do not, then press [OK]. bizhub PRESS 1250/1052...
Page 331 2 is operating for the current delivery, the next job will be delivered to the stacker 3. [Stacker Auto] functions as described above provided that all the stackers operate as expected, and that ei- ther the next stacker to receive delivery has no remaining paper or [Pile Allow] has been selected. bizhub PRESS 1250/1052...
Page 332: Display Under [Output Setting] On The Copy Screen
Copy Screen. These keys allow you to select an output function with a single touch or to directly jump to the subsequent screen for each function. The shortcut key setting is provided in [System Setting] on the Utility menu. Reference For details on the setting procedure, see Section 7 of the POD Administrator's Reference. bizhub PRESS 1250/1052...
Page 333: Setting Binding Direction For Duplex Copies
[Top] specified in the Output Setting properly functions only when [1->2] or [2->2] is selected. When the machine is reset, [Right & Left] will be resumed. Position the original. Press [COPY] tab to display the Copy Screen. Select either [1->2] or [2->2]. bizhub PRESS 1250/1052...
Page 334 % Press [Default Set] to restore the initial settings of the Output Setting. Press [Cancel] to resume the previous setting. % Printing will not start without the Copy Screen displayed. Be sure to display the Copy Screen when you start printing. bizhub PRESS 1250/1052...
Page 335 Setting Binding Direction for Duplex Copies bizhub PRESS 1250/1052 8-10...
Page 336: Using Folding Unit Fd-503
Outside Print Inside Print Print Print Print Print Punch: Punch holes in printed sheets for filing purposes. Specify the number of punch holes and their positions. Original Output 2-Hole Punch Left Right 3-Hole Punch Left Right bizhub PRESS 1250/1052 8-11...
Page 337: Folding Copies: Z-Fold/Tri-Fold-In/Tri-Fold-Out/Double Parallel/Gate/Half-Fold
% Select the desired one from the keys under [Fold Type]. % Press either [Outside Print] or [Inside Print] provided under [Print Side] to select the print side. % The print side selection is unavailable for Z-Fold mode. bizhub PRESS 1250/1052 8-12...
Page 338: Punching File Holes In Copies: Punch
Punch mode is unavailable for paper sizes other than standard (Detect Size Setting, Custom, Wide Pa- per, Tab paper). Position the original. Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Press [Punch]. bizhub PRESS 1250/1052 8-13...
Page 339: Loading Covers Into Post Inserter Of Folding Unit Fd-503
Perfect Binder PB-503, cover sheets can be attached to output copies to make perfect-bound booklets. Reference Paper setting for the covers to be loaded in the post inserter tray is required. For details, see Section 7 of the POD Administrator's Reference. For details of perfect binding, see page 8-43. bizhub PRESS 1250/1052 8-14...
Page 340: Preventing Multiple Feeding In Post Inserter Of Folding Unit Fd-503
As shown below, push both roller lock levers inside to lock them. NOTICE Be sure to lock the rollers on both sides, when required. Do not lock the paper rollers in usual operation. bizhub PRESS 1250/1052 8-15...
Page 341: Using Finisher Fs-532
Groups together multiple copies of each original. Copies are stacked upon exit without being offset. Combined with the output modes above, you can also select the desired Face ([Face Up] or [Face Down]) and Order ([1 to N] or [N to 1]), as needed. bizhub PRESS 1250/1052 8-16...
Page 342: Sorting Copies: Sort/Group/Offset Sort/Offset Group
% The tray currently selected appears highlighted on the front image of the machine. If the primary (main) tray is not selected, press the primary (main) tray position key to highlight it. Select the desired output mode. % Select one of [Offset Sort], [Sort], [Offset Group], and [Group] keys. bizhub PRESS 1250/1052 8-17...
Page 343: Sorting Copies Output To Secondary (Sub) Tray: Sort/Group
Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Select the secondary (sub) tray as output tray. % Press the tray position key " " of the secondary (sub) tray to highlight it. bizhub PRESS 1250/1052 8-18...
Page 344: Stapling Copies (Corner/2 Position Staple): Staple
Copies will be stapled in this mode. Select one of the following five types of the staple position. Staple position Stapling method Corner Staple - Left Corner Corner Staple - Right Corner 2 Position Staple - Left 2 Position Staple - Top bizhub PRESS 1250/1052 8-19...
Page 345 The Output Setting Screen will be displayed. Press [Staple]. The Staple Screen will be displayed. Select the desired staple position. % When you select any one of 2 Position Staple, also select [Wide], [Narrow], or [Narrow+] to specify the staple pitch. bizhub PRESS 1250/1052 8-20...
Page 346: Making Folded Booklets: Fold & Staple/Multi Half-Fold
Fold & Staple: 25 sheets (14 to 16 lb Bond), 20 sheets (17 to 21 lb Bond), 16 sheets (22 to 24 lb Bond), 5 sheets (25 to 57 lb Bond) Output tray Folder tray bizhub PRESS 1250/1052 8-21...
Page 347: Folding Copies In Three: Multi Tri-Fold
Finisher FS-532 mounted with Saddle Stitcher SD-510 allows the machine to copy on 8.5 e 11 w or A4 w paper and then fold it inside in three. When selecting Multi Tri-Fold, also select either inside or outside to have the printed image. bizhub PRESS 1250/1052 8-22...
Page 348 Position the original. Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Press [Multi 3-Fold]. The Multi Tri-Fold Screen will be displayed. Select either [Outside Print] or [Inside Print]. bizhub PRESS 1250/1052 8-23...
Page 349: Punching File Holes In Copies: Punch
Finisher FS-532 mounted with Punch Kit PK-522 provides the Punch mode to punch file holes in copies. Punch and Staple are compatible. NOTICE Do not punch special paper type such as OHP transparencies, labels, or tracing paper. Punching in special paper may cause unexpected machine trouble. bizhub PRESS 1250/1052 8-24...
Page 350 Punch mode is unavailable for paper sizes other than standard (Detect Size Setting, Custom, Wide Pa- per, Tab paper). Position the original. Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Press [Punch] . bizhub PRESS 1250/1052 8-25...
Page 351: Using Finisher Fs-532 Manually
Using Finisher FS-532 Manually Finisher FS-532 mounted with Post Inserter PI-502 can be operated manually with the operation panel pro- vided on the post inserter. Finisher FS-532 provides the following output modes according to the optional configuration. bizhub PRESS 1250/1052 8-26...
Page 352 Corner Staple/2 Position Staple Place paper face up. Punch Place paper face up. Fold & Staple Place the face to be outside the booklet up. Multi Tri-Fold Place the face to be outside the fold up. bizhub PRESS 1250/1052 8-27...
Page 353: Taking Out Sheets From The Folder Tray
Taking Out Sheets From the Folder Tray Output sheets are delivered to the folder tray when using Fold & Staple, Multi Half-Fold, or Multi Tri-Fold mode. Follow the procedure below to take out the output sheets from the folder tray. bizhub PRESS 1250/1052 8-28...
Page 354 Return the paper delivery handle to stop the paper delivery belt. % The paper delivery belt stops even with a slight lift of the paper delivery handle. Take out the output sheets from the folder tray. bizhub PRESS 1250/1052 8-29...
Page 355: Taking Out Printed Sheets From The Primary (Main) Tray Suspended Automatically
Confirm that the primary (main) tray reaches the top position. When the primary (main) tray goes up completely, the message [Press [Start] to restart] will be dis- played. bizhub PRESS 1250/1052 8-30...
Page 356: To Suspend The Output Manually
The suspend indicator keeps flashing even after all sheets are removed from the tray. % The output can be resumed with printed sheets left in the tray; however, please do not move the sheets back and forth and around. bizhub PRESS 1250/1052 8-31...
Page 357: Taking Out Printed Sheets From The Secondary (Sub) Tray Suspended Automatically
At this time, the message [Sub tray of staple finisher is full / Please remove paper] appears in the message area of the screen, and the Start LED turns orange. The machine cannot resume printing even if you press Start. Take out all the printed sheets delivered to the secondary (sub) tray. bizhub PRESS 1250/1052 8-32...
Page 358: Taking Out Printed Sheets From The Folder Tray Suspended Automatically
Press Start on the control panel. The machine will resume printing. % The machine will not resume printing if you press the sus- pend/restart button provided on the finisher. bizhub PRESS 1250/1052 8-33...
Page 359: Canceling A Suspended Job
Taking Out Printed Sheets From the Tray of Finisher FS-532 8.5.5 Canceling a Suspended Job Press Stop on the control panel. A dialog box will be displayed to select whether or not to cancel the suspended job. Press [Cancel Job]. bizhub PRESS 1250/1052 8-34...
Page 360: Making Folded Booklets: Fold & Staple/Multi Half-Fold
Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Press either [Fold & Staple] or [Multi Half]. The screen to specify the Trimming mode will be displayed. bizhub PRESS 1250/1052 8-35...
Page 361 NOTICE Never return the folder tray to its original position with the tray stand opened. Enter the desired print quantity from the control panel keypad. % Enter 5 or less for Multi Half Fold. bizhub PRESS 1250/1052 8-36...
Page 362: Folding Copies In Three: Multi Tri-Fold
Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Press [Multi 3-Fold]. The screen to specify the print side will be displayed. Select either [Outside Print] or [Inside Print]. bizhub PRESS 1250/1052 8-37...
Page 363 The Output Setting Screen will be restored. Press [OK] on the Output Setting Screen to return to the Copy Screen. An icon representing specified output mode will be displayed under [Output Setting] on the Copy Screen. bizhub PRESS 1250/1052 8-38...
Page 364: Using Folding Unit Fd-503/Finisher Fs-532/Saddle Stitcher Sd-506 Manually
Multi-feed detection Multi-feed detection - Multi-feed detection - button Staple selection but- Corner Staple 2 Position Staple Fold & Staple Punch selection but- 2-Hole Punch 3-Hole Punch Fold selection button Z-Fold Tri-Fold-in Half-Fold Tri-Fold-out Double Parallel Gate bizhub PRESS 1250/1052 8-39...
Page 365 % Press Staple Selection button, Punch Selection button or Fold Selection button, and turn on the desired mode lamp. % Punch and Corner Staple/2 Position Staple are compatible. To use them in combination, turn on the lamps of both functions. bizhub PRESS 1250/1052 8-40...
Page 366 % The suspension button provided on Finisher FS-532 is unavailable for the job using a manual func- tion. [1]: Start/Stop button % If multi-feeding is detected and the machine stops even if a single sheet is fed, press the multi-feed detection button to turn on the lower lamp. bizhub PRESS 1250/1052 8-41...
Page 367 Using Folding Unit FD-503/Finisher FS-532/Saddle Stitcher SD-506 Manually [1]: Multi-feed detection button NOTICE The Finisher FS-532 trays have a limit in capacity. Be careful not to exceed the limit, otherwise unex- pected trouble may be caused. bizhub PRESS 1250/1052 8-42...
Page 368: Using Perfect Binder Pb-503
[7] Cover lead edge adjustment [8] Left binding (upside down for right binding) Original: single-sided, even number Body set: duplex copying Cover Print: OFF Front cov- Body set original Back cover origi- er original Body set output Cover print bizhub PRESS 1250/1052 8-43...
Page 369 Back cover orig- inal inal Body set output Cover print Original: single-sided, odd number Body set: duplex copying Cover Print: OFF Front cov- Body set original Back cover origi- er original Body set output Cover print bizhub PRESS 1250/1052 8-44...
Page 370 – more) + 5 mm or more of trimming width if Trimming mode is specified. – See Section 3 for the maximum size available in each tray. Paper weight – Body: 18 to 24 lb Bond bizhub PRESS 1250/1052 8-45...
Page 371: Turning On/Off The Heater Of The Perfect Binder
It requires approximately 20 minutes of warmup time to melt the pellets to be ready for the operation. Adding heat continuously to glue pellets, however, may deteriorate them if the Perfect Binder PB-503 is kept unoperated. bizhub PRESS 1250/1052 8-46...
Page 372 Once [Perfect Bind] selected on the Output Setting Screen, the heater of the per- fect binder will continue warming up even though the setting is canceled with [Function Off] pressed on the bizhub PRESS 1250/1052 8-47...
Page 373: Managing The Perfect Binder Pb-503 And Glue Pellets
Do not touch the lever in the glue hopper with your hand. It may cause machine trouble. Precautions for glue pellets Glue pellets are not edible. Do not put them in your mouth nor swallow them. Keep glue pellets out of reach of children. bizhub PRESS 1250/1052 8-48...
Page 374: Making Perfect-Bound Booklets
[ON] of PB heater switch. % When the heater switch for the perfect binder is turned [ON], [PB Shut OFF] becomes [PB Warming Up]. After completion of the warmup, the display will change again to [PB Heater]. bizhub PRESS 1250/1052 8-49...
Page 375 Press [COPY] tab to display the Copy Screen. Select the tray loaded with paper for the body sets. The paper size will be detected automatically. Change the paper setting, as required. % The paper size will be detected automatically. bizhub PRESS 1250/1052 8-50...
Page 376 When you stop using the perfect binder, be sure to turn off the heater so as to prevent the deg- radation of glue pellets. Select the tray loaded with covers. % To the right of [Cover Tray], press [Change Set] to select the tray to which the cover paper has been loaded in step 4. bizhub PRESS 1250/1052 8-51...
Page 377 % When the setting is completed, press [Close]. Press [OK] on the Cover Tray Screen. The Perfect Bind Screen will be restored. Select the settings for cover print, cover print side, cover trimming and bind direction. bizhub PRESS 1250/1052 8-52...
Page 378 % Press [OK] to restore the Perfect Bind Screen. Make fine adjustments in the lead edge, trimming width, and image position of the cover. % Press [Change Set] on the right side of [Fine Adjustment] to display the Fine Adjustment Screen. bizhub PRESS 1250/1052 8-53...
Page 379 % To disable the function while keeping the current setting, press [Function OFF]. The Output Setting Screen will be restored. Press [OK] on the Output Setting Screen to return to the Copy Screen. The Perfect Bind icon will be displayed under [Output Setting] on the Copy Screen. bizhub PRESS 1250/1052 8-54...
Page 380: Taking Out Perfect-Bound Books From Perfect Binder Tray
(1 set 30 mm thick e 11 e 1 column = approx. 3,300 sheets) % The feeding button does not function while the machine is delivering finished books onto the perfect binder tray. % The feeding button does not function without the carriage installed. bizhub PRESS 1250/1052 8-55...
Page 381 % Before taking out the books, be sure to remove the book holding plate and book stopper, if used. Return the carriage to its original position, then close the perfect binder tray front door. If the column of books is left on the right side of the tray, repeat steps from 2 to 7. bizhub PRESS 1250/1052 8-56...
Page 382: Outputting To The Stacker
% Select either [Face Up] or [Face Down], and either [1 to N] or [N to 1] provided under [Face/Order], as needed. % Selecting [N to 1] automatically sets and limits the Face mode to [Face Up]. bizhub PRESS 1250/1052 8-57...
Page 383: Removing Finished Sets From The Stacker
If the carriage is returned with any sheets left on the stacker unit, machine trouble may be caused. Be sure to remove all the sheets. bizhub PRESS 1250/1052 8-58...
Page 384: To Secure Paper On Carriage
Hold the paper using the paper stopper. % Turn the paper stopper to the paper. NOTICE Do not push it too strong. Otherwise, output sheets may be torn or wrinkled. bizhub PRESS 1250/1052 8-59...
Page 385: Outputting To The Secondary Tray
Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Select the secondary (sub) tray as output tray. % Press the tray position key of the secondary (sub) tray to highlight it. bizhub PRESS 1250/1052 8-60...
Page 386 An icon representing specified output mode will be displayed under [Output Setting] on the Copy Screen. NOTICE The secondary (sub) tray of Large Capacity Stacker LS-505 has a limit in capacity. Be careful not to exceed the limit, otherwise unexpected trouble may be caused. bizhub PRESS 1250/1052 8-61...
Page 387: Using Two Machines In Tandem: Tandem Mode
Interrupt copying is available only on the machine with Interrupt pressed on the control panel. The tandem mode printing on the ma- chine with the interrupt mode activated will be suspended until the interrupt copying is completed. bizhub PRESS 1250/1052 8-62...
Page 388 % Confirm that both machines are ready to copy with the Copy Screen displayed. Press [Output Setting] on the Copy Screen of the machine to be This MFP. The Output Setting Screen will be displayed. Press [Tandem]. bizhub PRESS 1250/1052 8-63...
Page 389 Be sure to select [ON] on the Tandem Setting Screen not for the Partner MFP but for This MFP. Other- wise, the tandem mode cannot be activated. % To specify the copy condition for using multiple trays on a machine, corresponding tray sizes on This MFP and Partner MFP should be the same. bizhub PRESS 1250/1052 8-64...
Page 390: Cancelling The Tandem Mode/Printing
The scanning/printing job stops immediately, and a confirma- tion dialog appears on the screen of This MFP. At this time, the tandem mode is not yet released. Press [Cancel Job]. All the scanned data will be cleared completely to release the tandem mode/printing. bizhub PRESS 1250/1052 8-65...
Page 391: Cancelling Tandem Mode Printing On The Partner Mfp Only
This MFP to take over the remaining print quantity. Press [Cancel Job]. This will release the tandem mode and cancel printing on the Partner MFP. % Press [Continue] to continue the tandem mode printing stopped temporarily on the Partner MFP. bizhub PRESS 1250/1052 8-66...
Page 392: Troubleshooting In Tandem Mode/Printing
The Distribution Recovery mode functions to complete the job on This MFP. When the power is turned off on The tandem mode/printing will be released automatically in either either machine case. Restart the procedure from the first step. bizhub PRESS 1250/1052 8-67...
Page 393: Using Multi Puncher Gp-501
If required, open the front door of the multi puncher to check it before the operation. Position the original. Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Press [Punch]. bizhub PRESS 1250/1052 8-68...
Page 394 % To restore the previous setting, press [Cancel]. % To disable the function while keeping the current setting, press [Function OFF]. The Output Setting Screen will be restored. Press [OK] on the Output Setting Screen to return to the Copy Screen. bizhub PRESS 1250/1052 8-69...
Page 395: Exchanging The Die Set
Slowly withdraw the die set. Take out the desired die set from the rack to replace it with the one currently set. % Securely set the die set in position. bizhub PRESS 1250/1052 8-70...
Page 396 8.11 Using Multi Puncher GP-501 Put the replaced die set into the rack. % The replaced die set is supposed to be stored in the rack. Close the multi puncher front door. bizhub PRESS 1250/1052 8-71...
Page 397: Making Booklets Bound With Bind Parts Through Punch Holes: Ring Bind
% For details on changing the Tray Setting, see Section 3 of the POD Administrator's Reference. % If temporary change of the paper setting is desired, change the setting from the Paper Presetting Screen. See page 6-39 for details. bizhub PRESS 1250/1052 8-72...
Page 398 For the paper weight adequate to body sheets, covers, and insert sheets, see page 3-2. Press [COPY] tab to display the Copy Screen. Press [Output Setting]. The Output Setting Screen will be displayed. Press [Ring Bind]. The Ring Bind Screen will be displayed. bizhub PRESS 1250/1052 8-73...
Page 399 The Output Setting Screen will be restored. Press [OK] on the Output Setting Screen to return to the Copy Screen. An icon representing specified output mode will be displayed under [Output Setting] on the Copy Screen. bizhub PRESS 1250/1052 8-74...
Page 400 Never open the top cover or front door of the ring binder while the machine operation is in process. Also, never withdraw the booklet tray. Otherwise the machine immediately stops the operation and pa- per jam may be caused. bizhub PRESS 1250/1052 8-75...
Page 401: Taking Out Booklets From The Booklet Tray
Follow the procedure below to take out booklets from the booklet tray. Withdraw the booklet tray. NOTICE Never withdraw the booklet tray of the ring binder while the ma- chine operation is in process. Otherwise, a paper jam may be caused. bizhub PRESS 1250/1052 8-76...
Page 402 If the booklet tray is not returned securely in place, the message [Please close front door of ring binder booklet tray] will be displayed in the message area of the screen. The display panel of the ring binder shows the ALERT - Supplies/Trays Screen with the message [Close Booklet Drawer] displayed. bizhub PRESS 1250/1052 8-77...
Page 403 % To improve the appearance of the bound booklet, flip the back cover over so that the spine of the bind part should be hidden between the back cover and the last page of body sheets. (1: front cover, 2: back cover) bizhub PRESS 1250/1052 8-78...
Page 404: Job Management
Job Management...
Page 405: Overview Of The Job List Screen
% Press [Send History] to display the Send History Screen. See page 9-30 for details. % Press [Incomplete History] to display the Incomplete History Screen. See page 9-32 for details. % Press [Spool] to display the Spool Screen. See page 9-34 for details. bizhub PRESS 1250/1052...
Page 406 Overview of the Job List Screen Press any tab key other than [JOB LIST] in the upper area of the screen to exit the Job List Screen. bizhub PRESS 1250/1052...
Page 407: Job Active/Suspend List Screen
[Details] Pressed to confirm details of a specified job. [Prior Print] Pressed to suspend the job currently printed in order to output a specified job prior to the current job. bizhub PRESS 1250/1052...
Page 408: Displaying Details Of A Job
% Press the row of the desired job. % You can select a job from either Active list or Suspend list. Press [Details]. The Mode Check Screen will be displayed. Review the job settings on the Mode Check Screen. bizhub PRESS 1250/1052...
Page 409: Operating Prior Print
The machine automatically restart the output for the suspended job after completing the top-priority job. Press [JOB LIST] tab on the screen. % Press [Job] on the Job List Screen if you find [Job] is not highlighted. bizhub PRESS 1250/1052...
Page 410 % Interruption does not work when the top-priority job is in the Active list or while its output is in progress. % The top-priority job in process can also be suspended and continued on the following day just as ordinary jobs can. bizhub PRESS 1250/1052...
Page 411: Changing Output Order
% When the list extends to more than one page, scroll up and down the list with the up and down ar- rows. % Select the row of the desired job. You cannot select more than one row. Press [Suspend]. bizhub PRESS 1250/1052...
Page 412: Deleting A Single Job From Active List
% When the list extends to more than one page, scroll up and down the list with the up and down ar- rows. % Select the row of the desired job. You cannot select more than one row. Press [Delete]. bizhub PRESS 1250/1052...
Page 413: Deleting All Jobs From Active List
Be careful when deleting the jobs that have not been saved on the HDD, FTP, or SMB, for those cannot be restored once deleted. Press [JOB LIST] tab on the screen. % Press [Job] on the Job List Screen if you find [Job] is not highlighted. Press [All Delete]. bizhub PRESS 1250/1052 9-10...
Page 414: Operating Ticket Edit For Suspended Job
% See page 9-8 for how to move a job from the Active list to the Suspend list. % See [User's Guide - Network Scanner] for how to recall a job stored on the HDD to the Suspend list. bizhub PRESS 1250/1052 9-11...
Page 415 % If the job is of the duplex printing, press [Front Side] or [Back Side] to check the output image for each. % Press [Top Sheet], [Back Sheet], [Next Sheet], or [Last Sheet] to navigate to the desired page. The counter in the frame indicates the sheet number currently displayed and the number of all sheets. bizhub PRESS 1250/1052 9-12...
Page 416 % If the machine has an ongoing job or ADF is used for scanning, a dialog will appear to cancel the sample printing. Press [Cancel], and please wait until the sample printing becomes available. % The Machine Screen is displayed while the sample printing is in progress. No other screen can be displayed. bizhub PRESS 1250/1052 9-13...
Page 417: Releasing Suspended Job
% When the list extends to more than one page, scroll up and down the list with the up and down ar- rows. % Select the row of the desired job. You cannot select more than one row. Press [Release]. % To return all the jobs from the Suspend list to the Active list, press [All Release]. bizhub PRESS 1250/1052 9-14...
Page 418: Schedule
When a job operation has started or restarted When a reserved job is added, deleted, or changed in output order When an output job is completed When the screen has not been reloaded for more than 30 seconds during output bizhub PRESS 1250/1052 9-15...
Page 419 Pressing the bar displays the paper setting dialog for that job. [Job Delete] Pressed to delete the selected job. [Suspend] Pressed to suspend the selected job. bizhub PRESS 1250/1052 9-16...
Page 420 The required time shorter than a minute will be indicated as a minute. Make settings to output a job. % Use Reserve or Recall function to output multiple jobs. Press [JOB LIST] tab to display the Job List Screen. Press [Schedule] on the Job List Screen. bizhub PRESS 1250/1052 9-17...
Page 421: Using [Unit Change], [-], And [+]
Follow the procedure on page 9-17 to display the Schedule Screen. Press [Unit Change] to switch the unit of time-line. % The unit switches to [Timetable] or [Time Frame (H/M)] every time you press [Unit Change]. Press [-] or [+] to change the display scale. bizhub PRESS 1250/1052 9-18...
Page 422: Operating Paper Setting Dialog Via Operation Dialog
[<-] becomes grayed out to show inactivity. If the selected job uses more than one tray, use the up-down arrow keys of [Tray Select] to switch the paper setting dialog of the job from one tray to another. bizhub PRESS 1250/1052 9-19...
Page 423: Changing Output Order Of Reserved Jobs
% Press [<-] to advance the job by one in output order, or [<<] to output it next to the current printing job. % Press [->] to delay the job by one in output order, or [>>] to output it last. % The keys to change the output order are unavailable if they appear grayed out. bizhub PRESS 1250/1052 9-20...
Page 424: Changing Tray Setting
You can change the Tray Setting at this time. Follow the procedure on page 9-17 to display the Schedule Screen. Select the bar of the job to be changed in the Tray Setting. bizhub PRESS 1250/1052 9-21...
Page 425 Select the tray to be changed in the Tray Setting from the operation dialog, then press [Tray Setting] on the Schedule Screen. The Tray Setting Screen will be displayed for the selected tray. Press [Change Set] or [Recall]. Change the setting as desired, then press [OK]. bizhub PRESS 1250/1052 9-22...
Page 426: Outputting [No Appropriate Paper] Job
Follow the procedure on page 9-17 to display the Schedule Screen. Select the bar of [No Appropriate Paper] for which the machine stops its operation. The paper setting dialog for the [No Appropriate Paper] job will be displayed. Confirm the paper size and paper conditions. bizhub PRESS 1250/1052 9-23...
Page 427 Press [Close] on the Tray Setting Screen. The Schedule Screen will be restored. Press the [MACHINE] tab to display the Machine Screen. Load paper of the size referred to in the message into the desired tray. bizhub PRESS 1250/1052 9-24...
Page 428: Outputting A Job With Mismatched Paper Size
If the tray specified for a print job is not loaded with the paper size specified for that job, an orange-colored bar appears in the appropriate tray column of the job bar display. Then, that job becomes the top in output order, the machine stops its operation. bizhub PRESS 1250/1052 9-25...
Page 429: Changing Reserved Job To Suspended Job
You can delete a reserved job from the Job Active/Suspended List Screen, or the Schedule Screen also al- lows you to perform this task. Delete a reserved job according to the following procedure. Follow the procedure on page 9-17 to display the Schedule Screen. Select the bar of the job to be deleted. bizhub PRESS 1250/1052 9-26...
Page 430 Schedule Press [Job Delete] in the lower right of the screen. A confirmation dialog will be displayed. Press [Yes]. The selected job will be deleted and disappear from the Schedule Screen. bizhub PRESS 1250/1052 9-27...
Page 431: Checking Output/Send/Incomplete History
Press [JOB LIST] tab on the screen, then press [Output History]. The Output History Screen will be displayed. Check the status of output jobs on the list of the screen. % Use the scroll keys to scroll, if 17 or more output jobs are listed. bizhub PRESS 1250/1052 9-28...
Page 432 % If [*] and [)] provided under the [Output Setting] and [Application] lists appear active, there are more details to go. Press the keys for confirmation. When finished with checking, press [Close]. The Output History Screen will be restored. bizhub PRESS 1250/1052 9-29...
Page 433: Displaying Send History
Press [JOB LIST] tab on the screen, then press [Send History]. The Send History Screen will be displayed. Check the status of transmitted jobs on the list of the screen. % Use the scroll keys to scroll, if 17 or more transmitted jobs are listed. bizhub PRESS 1250/1052 9-30...
Page 434 Select a job of which you want to check details, then press [Details]. The Mode Check Screen will be displayed. Review the settings on the Mode Check Screen. When finished with checking, press [Close]. The Send History Screen will be restored. bizhub PRESS 1250/1052 9-31...
Page 435: Checking Incomplete History
Press [JOB LIST] tab on the screen, then press [Incomplete History]. The Incomplete History Screen will be displayed. Check the status of incomplete jobs on the list of the screen. % Use the scroll keys to scroll, if 17 or more incomplete jobs are listed. bizhub PRESS 1250/1052 9-32...
Page 436 Select a job of which you want to check details, then press [Details]. The Mode Check Screen will be displayed. Review the settings on the Mode Check Screen. When finished with checking, press [Close]. The Incomplete History Screen will be restored. bizhub PRESS 1250/1052 9-33...
Page 437: Operation On Spool Jobs
Check the status of spool jobs on the list of the screen. Use the scroll keys to scroll, if 17 or more spool jobs are listed. Select the desired spool job, then perform the job operation using the job operation keys. bizhub PRESS 1250/1052 9-34...
Page 438 Operation on Spool Jobs % Press [To Top] to move the selected job to the top of the list. Press [Up] to move the selected job by one in priority order. % Press [Delete] to delete the selected job. bizhub PRESS 1250/1052 9-35...
Page 439: Advanced Information
Advanced Information...
Page 440: Making Sample Set For Checking Results: Proof Copy
% Depending on the selected output settings or application functions, scroll keys appear at the bottom of each area. Press the keys to check all the settings. If no setting change is desired, proceed to step 7. bizhub PRESS 1250/1052 10-2...
Page 441 % To cancel the output of proof-copied job, press Stop on the control panel, and then press [Cancel Job] on the dialog. All the image data will be cleared. Press Start on the control panel. The machine will start batch printing. bizhub PRESS 1250/1052 10-3...
Page 442: Checking Feature Selections Before Printing: Mode Check
Press [Set Number], and then enter the desired print quantity from the control panel keypad. Print Side Pressing [Print Side] will display the screen to change the simplex/du- plex mode. Change the setting as desired, then press [OK]. bizhub PRESS 1250/1052 10-4...
Page 443 % Press [Proof Copy] or [Proof Print (1st Sheet)] on the Mode Check Screen, or press Proof Copy on the control panel, as required. % If Separate Scan mode is selected, press Start on the control panel to scan all the original before pressing Proof Copy. bizhub PRESS 1250/1052 10-5...
Page 444 % If any setting change is desired, proceed to step 5 of Proof Copy. See page 10-2 for details. Press [Close]. The Copy Screen will be restored. Press Start on the control panel. The machine will start batch printing. bizhub PRESS 1250/1052 10-6...
Page 445: Making Sample Set During Output: Sample Print
A sheet of sample image will be delivered to the secondary (sub) tray of the finishing option in use. % With [ON] selected for Print Cycle in the Administrator Setting, the machine automatically continues making sample prints in the specified cycle. bizhub PRESS 1250/1052 10-7...
Page 446 10.3 Making Sample Set During Output: Sample Print % To suspend the output due to the poor quality of sample image, press Stop on the control panel. See page 4-21 for details of subsequent operations. bizhub PRESS 1250/1052 10-8...
Page 447: Interrupting Job In Progress: Interrupt Mode
The Copy Screen for interrupt copying will be displayed. Set copy conditions, as desired. All copy conditions except Reserve mode can be specified. Position the original, then press Start on the control panel. The machine will start the interrupt copying. bizhub PRESS 1250/1052 10-9...
Page 448 When the interrupt copying is completed, press Interrupt again. The Interrupt LED will go out and the Machine Screen will be displayed. The machine restores the set- tings of the initial job. Press Start on the control panel to resume copying. bizhub PRESS 1250/1052 10-10...
Page 449: Storing And Recalling Job Conditions: Mode Memory
Press the keys to check all the settings. % If any setting change is desired, press [Cancel] on the Mode Check Screen, and then press[Cancel] on the Mode Memory Screen. The Copy Screen will be restored. Please make correction of the set- tings. bizhub PRESS 1250/1052 10-11...
Page 450 % You may enter up to 16 alphanumeric characters including symbols for the name. % You do not always have to name a job. Pressing [OK] without entering a name will display 16 aster- isks (*) on the selected key. bizhub PRESS 1250/1052 10-12...
Page 451: Recalling Stored Job Settings
Machine Screen. Position the original. Press [COPY] tab to display the Copy Screen. Press Mode Memory on the control panel. The Mode Memory Screen is displayed. Press the job number key that you want to recall. bizhub PRESS 1250/1052 10-13...
Page 452 Press the keys to check all the settings. Press [OK] on the Mode Check Screen. The Copy Screen will be restored. The job settings are recalled on the screen. Enter the desired print quantity, then press Start on the control panel. bizhub PRESS 1250/1052 10-14...
Page 453: Recalling Job Settings At A Single Operation: Function Key
Display the Copy Screen, then press the desired function key. The Mode Memory job settings assigned to the function key will be recalled on the screen. Enter the desired print quantity, then press Start on the control panel. bizhub PRESS 1250/1052 10-15...
Page 454: Recalling Previous Job Settings
Review the job settings. Press [OK] on the Mode Check Screen. The Copy Screen will be restored. The job settings are recalled on the screen. Enter the desired print quantity, then press Start on the control panel. bizhub PRESS 1250/1052 10-16...
Page 455: Controlling And Monitoring Machine From Browser
Start the web browser, then enter the IP address of the main body in the address bar. The main page of Web Utilities will be displayed. Click [Remote Panel] on the Web Utilities main page. The browser displays the touch panel screen and control panel currently displayed on the machine. bizhub PRESS 1250/1052 10-17...
Page 456 Panel Script is the function to record and replay the operations performed using Remote Panel. Use this func- tion to show the setting procedure of a specific function or to apply a setting to another machine. bizhub PRESS 1250/1052 10-18...
Page 457: Monitoring Machine From Browser: Remote Monitor
The state of the machine, touch panel screen, and job condition will be displayed. To display the Remote Panel in another window to operate the machine from your PC, click the thumb- nail screen displayed in the Remote Monitor. bizhub PRESS 1250/1052 10-19...
Page 458: Monitoring Multiple Machines From Browser: Multi Monitor
Remote Panel will also be displayed in the same browser. To display the Remote Panel of the desired machine to operate it from your PC, click the thumbnail screen displayed in the Remote Monitor of that machine. bizhub PRESS 1250/1052 10-20...
Page 459 10.8 Controlling and Monitoring Machine from Browser bizhub PRESS 1250/1052 10-21...
Page 460: Troubleshooting
Troubleshooting...
Page 461: If [Please Call Service] Message Is Displayed: Call For Service
Turning off the main power switch with this message displayed may cause machine trouble such as toner fixation. Unplug the machine. Contact your service representative and report the condition and report code number. Reference See page 2-51 for how to turn off the power. bizhub PRESS 1250/1052 11-2...
Page 462: Limited Use Of The Machine
The following message will be displayed: [Please turn on power again C-0202] Turn OFF then ON the sub power switch. A printing/copying job can continue without using the troubled tray (e.g. tray 2) of the machine. bizhub PRESS 1250/1052 11-3...
Page 463: If [Mishandled Paper] Message Is Displayed
Detailed instruction to remove mishandled paper is displayed. Jam number Indicates a position of paper jam. [Illustration] Press this key to display a disposal instruction screen that explains the first preference method of fixing a problem, along with illustra- tions. Disposal Instruction Screen bizhub PRESS 1250/1052 11-4...
Page 464: Precautions For Removing Mishandled Paper From The Main Body
With the conveyance fusing unit pulled out, your hand may touch the drum surface if you put your hand as shown in the fig- ure on the right. Do not touch the drum surface, as it may be damaged. bizhub PRESS 1250/1052 11-5...
Page 465 Be especially careful not to touch the high temperature area when Lever [M9] is open. Do not try to remove mishandled paper from the left side without first opening Lever [M9]. It may cause machine trouble. bizhub PRESS 1250/1052 11-6...
Page 466: Precautions For Removing Mishandled Paper From Paper Feeder Unit Pf-703
You may not be able to pull out the stacker because it is automati- cally locked. Also, at times you may not be able to push the pulled-out stacker back into place because it is locked. bizhub PRESS 1250/1052 11-7...
Page 467: Precautions For Removing Mishandled Paper From Auto Ring Binder Gp-502
When opening the top cover of the ring binder, be sure to clear all the objects placed on it. Should any object be dropped in the back of the machine, please be sure to remove it. bizhub PRESS 1250/1052 11-8...
Page 468 When removing mishandled paper, make sure to lock the bypass deck so that it will not interfere with your work. NOTICE When closing the top cover or bypass deck of the ring binder, make sure to close them securely. Otherwise, the machine cannot be operated. bizhub PRESS 1250/1052 11-9...
Page 469: Operations On The Jam Position Screen And Disposal Instruction Screen
In order to configure the machine to resume printing right after warming up is complete, press Start on the control panel during warming up. Contact your service representative, if desired. 11.2.8 Jam number on the Jam Position Screen bizhub PRESS 1250/1052 11-10...
Page 470 Horizontal conveyance section of tray 4 (Paper Feeder Unit PF-703/PF-706) Feeding inlet of main body Drum unit Fusing unit Fusing unit/ADU ADF (feeding/delivering section) ADF (reversing section) Folding Unit FD-503 Large Capacity Stacker LS-505 (1st unit) bizhub PRESS 1250/1052 11-11...
Page 471 Horizontal conveyance section of tray 3 of Large Capacity Post Inserter PI-PFU Horizontal conveyance section of tray 2 of Large Capacity Post Inserter PI-PFU Multi Puncher GP-501 Auto Ring Binder GP-502 Relay Unit RU-509 Large Capacity Stacker LS-505 (3rd unit) bizhub PRESS 1250/1052 11-12...
Page 472: If Paper Jam Indicator Lights On Perfect Binder Pb-503
Turn Knob [PB14] to the left, and remove the paper jammed in the inlet of the conveyance section. If there is jammed paper in the outlet of the conveyance section, remove it. Check whether there is jammed paper in the Finisher FS-532. bizhub PRESS 1250/1052 11-13...
Page 473 11.3 If Paper Jam Indicator Lights on Perfect Binder PB-503 Check that the paper jam indicator is OFF. bizhub PRESS 1250/1052 11-14...
Page 474: If Jam Position Display Flashes On Finisher Fs-532
% Locate the vertical alignment plate within the range indicated by the arrow in the illustration. The lamp flashing in the jam position display will go off. Hold Handle [FS9] to return the stacker to its original position, then close the finisher front door. bizhub PRESS 1250/1052 11-15...
Page 475 % If the vertical alignment plate is in the position to cause interference with the machine, the stacker will be locked and cannot be returned. Turn Knob [FS8] to release the lock, then return the stacker to its original position. bizhub PRESS 1250/1052 11-16...
Page 476: If [Machine] Tab Flashes In Orange
If a paper jam has occurred with the print/scan job in progress while you are setting a reserve job, the ma- chine stops its operation and the [MACHINE] tab may flash in orange. If pressing [Confirm Detail] displays the Jam Position Screen, see page 11-10. bizhub PRESS 1250/1052 11-17...
Page 477: Tray Empty In A Copy Job In Progress
When the tray is supplied with paper, the message will change to [Press [Start] to restart]. Press Start on the control panel. Output operation will resume using the tray supplied with paper. Changing the tray selection Press [Confirm Detail]. bizhub PRESS 1250/1052 11-18...
Page 478 Select an available tray other than the empty one. % The available tray is the one loaded with paper of the same size. Press [OK]. The Machine Screen will be restored with the message [Press [Start] to restart] displayed. bizhub PRESS 1250/1052 11-19...
Page 479: Tray Empty In A Print Job In Progress
Using different paper type or weight may cause paper misfeed or machine trouble. When the tray is supplied with paper, the message will change to [Press [Start] to restart]. Press Start on the control panel. Output operation will resume using the tray supplied with paper. bizhub PRESS 1250/1052 11-20...
Page 480 Press [Confirm Detail]. A dialog will be displayed. Select the desired tray. The Paper Setting Screen will be displayed for the selected tray. Press [OK]. The Machine Screen will display the message [Press [Start] to restart]. bizhub PRESS 1250/1052 11-21...
Page 481: Inconformity In Paper Size During A Print Job In Progress
Using different paper type or weight may cause paper misfeed or machine trouble. After supplying the tray with paper, press [Confirm Detail] to select that tray and then press [OK]; the message will change to [Press [Start] to restart]. Press Start on the control panel. bizhub PRESS 1250/1052 11-22...
Page 482: Inconformity In Paper Type During A Print Job In Progress
[Please load designated paper in tray #] (when a feed tray is specified) or [Please load designated paper in tray /To check details, touch [Confirm Details]] (when a feed tray is not specified) displayed. bizhub PRESS 1250/1052 11-23...
Page 483 Using different paper type or weight may also cause paper misfeed or ma- chine trouble. Press [Change Setting]. The Machine Screen will be restored. The message [Press [Start] to restart] will be displayed. bizhub PRESS 1250/1052 11-24...
Page 484 11.5 If [MACHINE] Tab Flashes in Orange Press Start on the control panel. The machine will resume printing. bizhub PRESS 1250/1052 11-25...
Page 485: If [Memory Full] Message Is Displayed
Memory Overflow in Reserve Job When memory overflow occurs while scanning a reserve job with a printing job in progress, the machine im- mediately stops and displays the following screen. Press [Cancel Job]. All the scanned data will be cleared. bizhub PRESS 1250/1052 11-26...
Page 486: If The Message [Please Turn Off Then On The Power] Is Displayed
Be sure to wait until the message [Power off in progress / Please do not turn the main power off] disappears, then turn OFF the main power switch. Please wait for more than 10 seconds. Turn ON the main power switch, and turn ON the sub power switch. bizhub PRESS 1250/1052 11-27...
Page 487: If The Message [No Response From Controller] Is Displayed
Be sure to wait until the message [Power off in progress / Please do not turn the main power off] disappears, then turn OFF the main power switch. Please wait for more than 10 seconds. Turn ON the main power switch, and turn ON the sub power switch. bizhub PRESS 1250/1052 11-28...
Page 488: If Burrs Remain In Punch Holes: Multi Puncher Gp-501
If burrs still remain in punch holes after the lubrication, apply grease to the positions illustrated below. NOTICE Never use the grease on the general market. For the grease to be used in this procedure, please contact your service representative. bizhub PRESS 1250/1052 11-29...
Page 489: Indication And Handling Of Paper Jam In Auto Ring Binder Gp-502
The Start LED turns orange on the control panel, and machine operation cannot be continued until all the locations are cleared. Please refer to [OPERATION MANUAL] supplied with Auto Ring Binder GP-502 for details on instructions to remove mishandled paper. bizhub PRESS 1250/1052 11-30...
Page 490: Troubleshooting Tips
Is any mishandled paper left? Check machine diagram on the resume after mis- screen for additional indications of handled paper is mishandled paper. removed. 2->1 or 2->2 mode Is ADF open? Fully close ADF. cannot be select- bizhub PRESS 1250/1052 11-31...
Page 491 PK-522 does not displayed? Or, is the Punch-Hole box to dump the scrap. punch copies de- Scrap Box Full indicator on the Ma- spite being set to chine Screen lighting up in red? punch mode. bizhub PRESS 1250/1052 11-32...
Page 492 USB port of the main body. Re- Unit (IC Card connect it, then wait 10 seconds or Type) AU-201 is longer before turning the main connected to the power switch ON again. USB port of the main body. bizhub PRESS 1250/1052 11-33...
Page 493 USB port of the main body? Type) AU-201 to the USB port of the main body. Is the machine set to use the USB Contact your administrator. port? If remedies mentioned above do not work, contact your service representative. bizhub PRESS 1250/1052 11-34...
Page 494: Maintenance
Maintenance...
Page 495: Cleaning
Raise the document feeder, then clean the cover with a clean soft cloth. NOTICE Never use paint solvents, such as benzine or thinners, to clean the original glass and ADF guide cover. bizhub PRESS 1250/1052 12-2...
Page 496: Cleaning The Exterior Of The Machine
In order to maintain optimum print quality, we recommend to clean it every time before using the saddle stitcher tray. If any soil marks are found while printing, perform this cleaning procedure immediately. Fully withdraw the folder tray. bizhub PRESS 1250/1052 12-3...
Page 497 % Wipe the whole surface of the bottom plate with a soft cloth slightly dampened with alcohol (cleaner). Return the tray stand to its original position, then return the folder tray. NOTICE Never return the saddle stitcher tray to its original position with the tray stand opened. bizhub PRESS 1250/1052 12-4...
Page 498: Cleaning Scrap Box Of Multi Puncher Gp-501
Remove punch waste inside the unit using a vacuum cleaner. Close the front door of the multi puncher when you finish cleaning. bizhub PRESS 1250/1052 12-5...
Page 499: Checking Copy Count
For the developer counter and the OPC drum counter, you can set cycle and running time. Contact your service representative, if desired. Press Utility/Counter on the control panel. The Utility Menu Screen will be displayed. Check the counter information. The counter information is displayed in the left side area of the screen. bizhub PRESS 1250/1052 12-6...
Page 500 % Select the desired simplex/duplex mode, output mode, and paper tray, then press Start on the con- trol panel. Press [Close]. The Utility Menu Screen will be restored. Press [Exit]. The Machine Screen will be restored. bizhub PRESS 1250/1052 12-7...
Page 501: If [Pm Call] Message Is Displayed
The administrator can call for service from the Administrator Setting in the Utility mode. In this case, you do not have to make a call for preventive maintenance, because your machine has been monitored automatically by your service representative. bizhub PRESS 1250/1052 12-8...
Page 502: Maintenance Service
The following accessories are bundled to this machine: Developer × 1 User's Guide - Security × 1 Safety Information × 1 Operation Quick Guide × 1 User's Guide (CD) × 1 User's Guide Holder (M) × 1 Control panel × 1 Others bizhub PRESS 1250/1052 12-9...
Page 503: Specifications
Specifications...
Page 504: Main Body Specifications
Main Body Specifications Specifications 13.1 Main Body Specifications Main body/option specifications are subject to change without notice due to continual improvements. 13.1.1 Main Body Name bizhub PRESS 1250/1052 Type Console Printing process Electrostatographic process using LED Original glass Fixed Photoconductor...
Page 505 Approx. 7.0 minutes or less (20 ℃ , 50% RH, 230 V) Warm-up time bizhub PRESS 1250: 2.8 seconds or less (8.5 × 11 v, A4 v) First-page copy time bizhub PRESS 1052: 3.0 seconds or less (8.5 × 11 v, A4 v) Noise 8.0 B or less (using the measurement method compliant with...
Page 506: Adf Df-615
B5 w/v, A5 v Original capacity Max. 100 sheets (22 lb Bond) Original insertion Automatic feed Weight Approx. 66.1 lb Dimensions 25.5 (W) × 22.4 (D) × 6.7 (H) inches Power source Supply from main body bizhub PRESS 1250/1052 13-4...
Page 507: Option Specifications
Weight Dehumidifier fan unit: 3.3 lb (per unit) AC power supply unit: 2.0 lb Power source DC: 24/5 V (supplied from main body) Maximum power consumption DC: 6 W or less AC: 580 W or less bizhub PRESS 1250/1052 13-5...
Page 508: Paper Feeder Unit Pf-706 (Tray 3 To Tray 8)
Feed paper for covers/insertions without printing Configuration 3 paper trays (PI-PFU1 to PI-PFU3) Paper tray capacity Upper tray: 1,300 sheets (22 lb Bond, height 150 mm) Middle/Lower tray: 1,850 sheets (22 lb Bond, height 203.5 mm) each bizhub PRESS 1250/1052 13-6...
Page 509: Relay Unit Ru-509
Deliver paper accelerating it according to the basic line speed determined for finishing operation, without making mechanical or humidifying curl adjustment. bizhub PRESS 1250: 125 sheets/min. (8.5 × 11 v, A4 v, Conveyance speed B5 v) bizhub PRESS 1052: 105 sheets/min. (8.5 × 11 v, A4 v, B5 v) Standard: 13 ×...
Page 510: Humidifier Hm-102 (Equipped In Relay Unit Ru-509)
Function Humidify paper on both front and back sides uniformly to make a curl adjustment. bizhub PRESS 1250: 125 sheets/min. (8.5 × 11 v, A4 v, Processing speed B5 v) bizhub PRESS 1052: 105 sheets/min. (8.5 × 11 v, A4 v,...
Page 511: Folding Unit Fd-503
Dimensions 15.7*(W) × 28.4 (D) × 48.4 (H) inches * Width including primary (main) tray: 26.2 inches/30.8 inch- es (with the edge pulled out) Weight Approx. 286.6 lb Power source 100 to 240 VAC, 5 VDC bizhub PRESS 1250/1052 13-9...
Page 512: Large Capacity Stacker Ls-505
Output a sheet or set of paper half-folded and trimmed in the Trimming edge to the fold & staple tray. Multi Tri-Fold Output a sheet or set of paper folded in three to the tri-fold tray. bizhub PRESS 1250/1052 13-10...
Page 513 Tab Paper (only with the tab side ahead in output direction) Paper weight 14 to 93 lb Bond Dimensions 46.0 (W) × 30.5 (D) × 48.1 (H) inches Weight Approx. 617.3 lb Power source 100 to 240 VAC, 5 VDC Maximum power consumption 270 W bizhub PRESS 1250/1052 13-11...
Page 514: Finisher Fs-532
200 sheets (22 lb Bond) (with full-load detection function ac- tivated) Warm-up time Approx. 20 minutes Dimensions 53.4 (W) × 30.5 (D) × 48.1 (H) inches Weight Approx. 595.2 lb Power source AC120 V 60 Hz, 5 VDC Maximum power consumption 1,000 W or less bizhub PRESS 1250/1052 13-12...
Page 515 * 31.36 inches: including Tray 2 When Post Inserter PI-502 mounted: 21.38 (W) e 28.4 (D) e 45.56 (H) inches Weight Approx. 163.1 lb Power source 24 VDC ± 10 Power consumption 144 W or less bizhub PRESS 1250/1052 13-13...
Page 516: Saddle Stitcher Sd-510 (Equipped In Finisher Fs-532)
1 to 5 sheets: 14 to 57 lb Bond 1 sheet: 58 to 80 lb Bond • Multi Tri-Fold 1 to 3 sheets: 14 to 24 lb Bond 1 sheet: 25 to 28 lb Bond See page 3-7 for details. bizhub PRESS 1250/1052 13-14...
Page 517: Punch Kit Pk-522 (Equipped In Finisher Fs-532)
Standard: 12 × 18 w, 11 × 17 w, 8.5 × 14 w, 8.5 × 11 w/v, Lower tray 5.5 × 8.5 v, A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, Foolscap Paper type Plain, Recycled, Fine Paper weight 14 to 53 lb Bond bizhub PRESS 1250/1052 13-15...
Page 518 20.08 (W) × 24.36 (D) × 8.64 (H) inches Weight Approx. 23.1 lb (Not including 6.61 lb of Mount Kit MK-732) Power source 24/5 VDC supplied from main body Maximum power consumption 30 W or less bizhub PRESS 1250/1052 13-16...
Page 519: Multi Puncher Gp-501 (Die Set Ds-501 To Ds-507)
13.2 Option Specifications 13.2.16 Multi Puncher GP-501 (Die Set DS-501 to DS-507) Name GP-501 Speed bizhub PRESS 1250: 120 sheets/min. bizhub PRESS 1052: 105 sheets/min. 8.5 × 11 v Sheet size Punch edge 11 inches Paper weight 20 to 57 lb Bond (80 lb Cover)
Page 520: 13.2.19 Other Options
Staple Kit SK-703 (for FS-532) Staple Cartridge RK953 (for SD-506) Large Capacity Stacker Handcart LC-501 Glue Chip GC-501 Die Set DS-501 to DS-507 Ring Binder Element RB-101 (for Black, Clear, White and Navy Blue) Fusing Unit EF-102 (Envelope) bizhub PRESS 1250/1052 13-18...
Page 521: Incompatible Copy Conditions
Background Removal (+ side) Background Removal (- side) Text/Photo - - e e e Mixed - e e e Z-Folded Orig. Single Feed Custom Size (except Full Area) Custom Size (Full Area/Input Size) Tab Paper Size bizhub PRESS 1250/1052 13-19...
Page 522 Original Type (Photo) Original Type (Text) Background Removal (+ side) Background Removal (- side) Text/Photo e e e e e Mixed Z-Folded Orig. Single Feed Custom Size (except Full Area) Custom Size (Full Area/Input Size) Tab Paper Size bizhub PRESS 1250/1052 13-20...
Page 523 Z-Folded Orig. e e e e e e Single Feed Custom Size (except Full Area) Custom Size (Full Area/Input Size) e e e e e e e e e e e e e Tab Paper Size bizhub PRESS 1250/1052 13-21...
Page 524 Background Removal (+ side) Background Removal (- side) Text/Photo e e e Mixed e e e Z-Folded Orig. Single Feed Custom Size (except Full Area) Custom Size (Full Area/Input Size) e e e Tab Paper Size bizhub PRESS 1250/1052 13-22...
Page 525 OFF in [03 Copy Setting] - [02 Individual Function Change] of the Utility menu. Without Separate Scan mode selected, the message [Please close ADF unit] will be dis- played. With the Image Rotation icon displayed on the screen, this function activates even if [Image Rotation OFF] is selected. bizhub PRESS 1250/1052 13-23...
Page 526: Copy Conditions Incompatible With Output Settings
Gate (Outside Print) Punch (Right) Punch (Left) Punch (Top) Multi Punch (Right) Multi Punch (Left) Multi Punch (Top) Face Up Face Down 1 to N N to 1 Right & Left HDD Store Perfect Bind Ring Bind Tandem bizhub PRESS 1250/1052 13-24...
Page 527 Perfect Bind e e e e e e e e e e e e e e e e e e e e e e e e e e Ring Bind e e e e e Tandem bizhub PRESS 1250/1052 13-25...
Page 528 Right & Left HDD Store e e e e e e e e e e Perfect Bind *17 *17 *17 *17 e e e e e e e e e e Ring Bind *38 *38 Tandem bizhub PRESS 1250/1052 13-26...
Page 529 Punch (Left) Punch (Top) Multi Punch (Right) Multi Punch (Left) Multi Punch (Top) Face Up Face Down 1 to N N to 1 Right & Left HDD Store e e e Perfect Bind Ring Bind Tandem bizhub PRESS 1250/1052 13-27...
Page 530 Released automatically. However, a certain setting may allow the use of both functions. Contact your service representative for details. Released automatically. However, a certain setting may allow the use of both functions. Contact your service representative for details. PI-PFU is available, while upper and lower trays are unavailable. bizhub PRESS 1250/1052 13-28...
Page 531: Copy Conditions Incompatible With Applications
Reduce & Shift - e e e e . No Image Area Erase All-image Area Stamp (Preset Stamp) Stamp (Page No.) Stamp (Set Numbering) Stamp (Date/Time) Watermark Watermark (Set Numbering) Copy Protect Annotation Registered Overlay Overlay bizhub PRESS 1250/1052 13-29...
Page 532 Frame Erase Center Erase Image Centering Shift Reduce & Shift No Image Area Erase All-image Area Stamp (Preset Stamp) Stamp (Page No.) Stamp (Set Numbering) Stamp (Date/Time) Watermark Watermark (Set Numbering) Copy Protect Annotation Registered Overlay Overlay bizhub PRESS 1250/1052 13-30...
Page 533 No Image Area Erase All-image Area Stamp (Preset Stamp) Stamp (Page No.) Stamp (Set Numbering) Stamp (Date/Time) Watermark Watermark (Set Numbering) Copy Protect Annotation Registered Overlay e e e e e Overlay bizhub PRESS 1250/1052 13-31...
Page 534 Stamp (Date/Time) e e e Watermark e e e Watermark (Set Numbering) e e e Copy Protect Annotation e e e - - - Registered Overlay e e e - - - Overlay bizhub PRESS 1250/1052 13-32...
Page 535 Registered Overlay selected, any mode except 2 Repeat will be grayed out. With the Image Rotation icon displayed on the screen, this function activates even if [Image Rotation OFF] is selected. Only 2 Repeat in designated order mode is unavailable. bizhub PRESS 1250/1052 13-33...
Page 536 Index...
Page 537: Index By Item
Original Type .............6-22 Finisher FS-532 ......2-36 8-16 8-26 8-39 Overlay ..............7-82 Fold & Staple ...........8-21 8-35 Folding Unit FD-503 ....2-26 8-11 8-14 8-39 Frame Center Erase ..........7-44 Page Margin - Reduce & Shift ........7-56 bizhub PRESS 1250/1052 14-2...
Page 538 ..............7-74 Tab Paper Size ............6-15 Tabbed paper ............5-27 Tandem mode ............8-62 Text/Photo ..............6-25 To stop scanning/printing .........4-21 To store paper ............3-14 To use this machine safely ..........1-4 Tri-Fold-in ..............8-12 Tri-Fold-out ...............8-12 Trim receiver ..............5-54 Trimmings ..............5-51 bizhub PRESS 1250/1052 14-3...
Page 539: Index By Button
JOB LIST tab ............4-2 Waste Toner ..............5-42 Weight ...............6-50 MACHINE tab ..........4-2 11-17 Wide Paper ..............6-47 Memory Full .............11-26 With Cover ..............7-9 Mis-center Detect ............6-52 With Cover/Blank ............7-9 Multi Punch ...............8-69 With Cover/Print ............7-9 No Appropriate Paper ..........9-23 bizhub PRESS 1250/1052 14-4...
Page 540 http://konicaminolta.com...

This manual is also suitable for:

Bizhub press 1052

Konica Minolta bizhub PRESS 1250 User Manual

1 Introduction

2 Preparation for Use

3 Paper and Original Information

4 Before Making Copies

5 Supplies and Disposals

6 Basic Setting

7 Application Functions

8 Output Setting

9 Job Management

10 Advanced Information

11 Troubleshooting

Quick Links

Troubleshooting

Related Manuals for Konica Minolta bizhub PRESS 1250

Summary of Contents for Konica Minolta bizhub PRESS 1250