Konica Minolta 7115 User Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Copier
  5. 7115
  6. User manual

Konica Minolta 7115 User Manual

Hide thumbs Also See for 7115:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Manual
hyo2.fm Page 1 Tuesday, October 16, 2001 1:17 PM
®

Energy Star

®
As an ENERGY STAR
Partner, we have determined that this machine
®
meets the ENERGY STAR
Guidelines for energy efficiency.
®
What is an ENERGY STAR
Product?
®
An ENERGY STAR
product has a special feature that allows it to
automatically switch to a "low-power mode" after a period of inactivity. An
®
ENERGY STAR
product uses energy more efficiently, saves you money
on utility bills and helps protect the environment.

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta 7115

Summary of Contents for Konica Minolta 7115

  • Page 1: Energy Star

    hyo2.fm Page 1 Tuesday, October 16, 2001 1:17 PM ® Energy Star ® As an ENERGY STAR Partner, we have determined that this machine ® meets the ENERGY STAR Guidelines for energy efficiency. ® What is an ENERGY STAR Product? ®...

  • Page 2: Table Of Contents

    Konica7115_7118.book Page i Tuesday, October 16, 2001 10:51 AM Contents Contents Introduction We Want You to Be a Satisfied Customer ........1-1 SAFETY INFORMATION..............1-2 Warning and Precaution Symbols...........1-2 Meaning of Symbols................1-2 WARNING..................1-3 CAUTION ..................1-4 Precautions for Routine Use ............1-5 Safety Information.................1-6 Laser Safety ..................1-6 Internal Laser Radiation ..............1-6 Laser Safety Label ................1-8...
  • Page 3 Konica7115_7118.book Page ii Tuesday, October 16, 2001 10:51 AM Contents Components and Their Functions ..........3-4 Parts Names and Their Functions ..........3-6 Copier ..................... 3-6 Inside the Copier ................3-8 Options ................... 3-9 Control Panel ................3-12 Names of Control Panel Parts and Their Functions ..... 3-12 Icons on the Control Panel ............
  • Page 4 Konica7115_7118.book Page iii Tuesday, October 16, 2001 10:51 AM Contents Selecting the Paper...............5-3 Feeding Paper Manually ...............5-5 Making Copies by Using the Bypass Tray ........5-6 Specifying the Zoom Ratio............5-11 Setting the Zoom Ratio ..............5-12 Adjusting the Image Density............5-16 Interrupting a Copy Job..............5-18 Advanced Copying Making 1-Sided Copies..............6-1 Finishing Copies (Sort and Group) ..........6-5...
  • Page 5 When This Type of Copy is Produced ........9-1 When the Copier is not Operating Correctly......9-4 10 Appendix 10.1 Specifications ................10-1 Copier Konica 7115/7118 ............. 10-1 Automatic Document Feeder DF-217........... 10-3 Paper Feed Cabinet PF-121............10-3 Shifting Unit IS-101............... 10-4 Job Tray IT-102 ................10-4 Multiple Bypass Tray MT-102............
  • Page 6 Konica7115_7118.book Page v Tuesday, October 16, 2001 10:51 AM Contents Conditions for Combined Functions ..........10-6 10.4 List of Paper Sizes and Zoom Ratios ........10-7 Paper Sizes...................10-7 Zoom Ratios(Original Size to Paper Size) ........10-8...
  • Page 7 Konica7115_7118.book Page vi Tuesday, October 16, 2001 10:51 AM Contents...

  • Page 8: Introduction

    Thank you for choosing a Konica 7115/7118. Instruction Manual describes the functions, operating procedures, precautions, and basic troubleshooting for the Konica 7115/7118 copier. Before using this copier, be sure to read the Instruction Manual thoroughly in order to ensure that you use the copier efficiently. After you have gone through the manual, store it in the holder on the rear side of the copier and keep it handy at all times.

  • Page 9: Safety Information

    Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Introduction SAFETY INFORMATION This section contains detailed instructions on the operation and mainte- nance of this machine. To achieve optimum utility of this device, all oper- ators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine.

  • Page 10: Warning

    Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Introduction WARNING • Do not modify this product: Fire, electrical shock, or breakdown could re- sult. If the product employs a laser, the laser beam source could cause blindness. • Do not attempt to remove the covers and panels which have been fixed to the product.

  • Page 11: Caution

    Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Introduction CAUTION • Do not use flammable sprays, liquids, or gases near this product, as fire could result. • Do not leave a toner unit or drum unit in a place within easy reach of children.

  • Page 12: Precautions For Routine Use

    Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Introduction Precautions for Routine Use • Do not store toner units, PC drum units, or other supplies and consumables in a place subject to direct sunlight and high temperature or humidity, as poor image quality and malfunction could result.

  • Page 13: Safety Information

    Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Introduction Safety Information Laser Safety This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the instructions in this manual. Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation.
  • Page 14 Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Introduction Laser Aperture of the Print Head Unit There is a laser aperture at the location shown above, which must, however, NEVER be viewed directly by the user. CAUTION Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

  • Page 15: Laser Safety Label

    Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Introduction Laser Safety Label A laser safety label is attached to the outside of the machine as shown be- low. WARNING LABEL This internal area is very hot. To avoid getting burned DO NOT TOUCH. This area generates high voltage.

  • Page 16: Ozone Release

    Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Introduction Ozone Release NOTE = Locate the Machine in a Well Ventilated Room = A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations.

  • Page 17: About The Instruction Manual

    Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Introduction About the Instruction Manual Explanation of Manual Conventions The marks and text formats used in this manual are described below. WARNING Failure to observe instructions highlighted in this manner may result in fatal or critical injuries.

  • Page 18: Explanation Of Basic Concepts And Symbols

    Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Introduction Explanation of Basic Concepts and Symbols The use of words and symbols in this manual are explained below. Paper Feeding During printing, paper is supplied from the right side of the copier and fed into the Exit Tray on top with the printed surface of the page facing down.

  • Page 19: Width" And "Length

    Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Introduction “Width” and “Length” Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as “A” in the illustration) and the second to the length (shown as “B”).

  • Page 20: Precautions

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Precautions Precautions Observe the following precautions to keep the copier in the best possible conditions. Installation Precautions Installation site To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements: A location away from curtains, etc.

  • Page 21: Space Requirements

    Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Precautions Space Requirements To ensure easy copier operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. <Konica 7115> 1038 <Konica 7118> 1038 Unit: mm Note Be sure to allow a clearance of 100 mm or more at the back of the copier for the ventilation duct and 150 mm or more at the right of the copier for the removal of the misfed papers.

  • Page 22: Operation Precautions

    Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Precautions Operation Precautions Operating Environment The environmental requirements for correct operation of the copier are as follows: Temperature: 10°C to 30°C (50°F to 90°F) with fluctuations of no more than 10°C (18°F) within an hour Humidity: 15% to 85% with fluctuations of no more than 10% within an hour Proper Use...

  • Page 23: Transporting The Copier

    Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Precautions CAUTION The area around the Fusing Unit is extremely hot. ➜ Do not touch any area other than those authorized in the manual to reduce the risk of burns. Be especially careful not to touch parts marked with warning labels, and their surrounding areas.

  • Page 24: Legal Restrictions On Copying

    Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Precautions Legal Restrictions on Copying Certain types of documents must not be copied with the purpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible copying.
  • Page 25 Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Precautions...

  • Page 26: Before Making Copies

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Before Making Copies Before Making Copies Available Features The main copy settings available with this copier are listed below. For details on their operation, refer to the pages indicated. Copies 1-sided copies (p.6-1) 2in1 copies (p.6-1) 4in1 copies (p.6-1) Dual Page copies (p.6-2)
  • Page 27 Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Before Making Copies Zoom Ratio Reduced/Full Size/Enlarge (p.5-11) Output Sort (p.6-6) Group (p.6-8) Note The Output functions available are limited according to the options equipped to the copier.
  • Page 28 Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Before Making Copies Applications Erase (p.6-10) Reverse Image (p.6-13) X/Y Zoom (p.5-14) Image Shift (p.6-14) Mixed Orig. Detection Mixed Originals (p.4-4) Note The Mixed Orig. Detection function is available when the copier is equipped with an Automatic Document Feeder (option).

  • Page 29: Components And Their Functions

    Konica 7115/7118 Original Cover Kit CV-117 (option) Presses down on an original placed on the Original Glass. Standard on Konica 7115. Automatic Document Feeder DF-217 (option) Automatically feeds originals one page after another for scanning. Paper Feed Cabinet PF-121 (option) Capable of holding up to 250 sheets of paper.
  • Page 30 Copy Desk DK-111(S)/DK-112(M)/DK-113(L) (option) Adjusts the height when a Paper Feed Cabinet is mounted. Fax unit for Konica 7115/7118 FK-117 (option) Permits fax transmission using this copier. Printer Controller IP-413 (option) A built-in type printer controller that allows the copier to be used as a printer with the copier connected to a personal computer.

  • Page 31: Parts Names And Their Functions

    Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Before Making Copies Parts Names and Their Functions Copier * The above illustrations represent a copier mounted with the optional Original Cover Kit.
  • Page 32 Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Before Making Copies Part Name Description Copy Tray Holds copies fed out face down from the copier. Front Cover Open when replacing the Toner Bottle. (p.8-8) 1st Tray Holds up to 250 sheets of paper and easily adjusts to different paper sizes.

  • Page 33: Inside The Copier

    Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Before Making Copies Inside the Copier Part Name Description Imaging Unit Forms a copy image. The Imaging Unit is to be replaced only by your Tech. Rep. Toner Bottle Holder Open to replace the Toner Bottle. Pressure Lever Use to clear a misfed sheet of paper at the Fusing Unit.

  • Page 34: Options

    Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Before Making Copies Options Automatic Document Feeder Part Name Description Document Exit Tray Receives originals which have been scanned by the copier. Document Guide Plate Slide the guide plate to the size of the originals. (p.4-3) Document Feeder Open when clearing an original that has been misfed.
  • Page 35 2nd Tray Up to 250 sheets of plain paper can be loaded. (p.8-6) Konica 7118 accepts a Paper Feed Cabinet of four trays. 3rd Tray Konica 7115 accepts a Paper Feed Cabinet of one tray. 4thTray 5thTray Side Cover Open to clear a misfed sheet of paper. (p.8-15)
  • Page 36 Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Before Making Copies When Job Tray is Mounted Shifting Unit Part Name Description Copy Tray Receives copy sets sorted. Job Tray Part Name Description Copy Tray Lamp Lights up when paper is fed into the Upper Copy Tray. Upper Copy Tray Receives printed pages produced via the personal computer or faxes received.

  • Page 37: Control Panel

    Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Before Making Copies Control Panel Names of Control Panel Parts and Their Functions Part Name Description PRINT • Lit while data received from personal computer is being printed. Blinks while data is being transferred. For details, refer to the Printer Controller User Manual.
  • Page 38 Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Before Making Copies Part Name Description ERASE • Press to select the erase position. OUTPUT • Press to select the output function. IMAGE SHIFT • Press to select the Image Shift mode. X/Y ZOOM •...

  • Page 39: Icons On The Control Panel

    Lights up when a malfunction occurs in the copier. Maintenance indicator Blinks or lights up when the time approaches that copier needs maintenance service. Call your Konica Service Centre. Add Paper indicator Lights up when the paper source currently selected for use runs out of paper.

  • Page 40: Turning On And Off And The Initial Mode

    Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Before Making Copies Turning ON and OFF and the Initial Mode How to Turn ON/OFF the Copier Turning Copier ON: Press the Power Switch to the 1 ➜ (ON) position. Turning Copier OFF: Press the Power Switch to the 2 ➜...

  • Page 41: Default Settings

    Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Before Making Copies Default Settings When the copier is turned ON, the function indicators on the control panel will indicate the default settings which serve as the reference for all control panel settings to be made later.

  • Page 42: Useful Functions

    Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Before Making Copies Useful Functions Auto Resetting Press the [AUTO RESET] key to return all modes and functions (zoom ratio, number of copies, etc.) to their defaults. (All selected settings are canceled.) The [AUTO RESET] key comes in handy for canceling all selected settings at one time.

  • Page 43: Power Save

    Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Before Making Copies Power Save Instead of turning OFF the copier, it can be set into a standby state (Power Save mode). To set the copier into the Power Save mode, press the [POWER SAVE] key.

  • Page 44: Interrupting Copy Jobs

    Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Before Making Copies Interrupting Copy Jobs During a long continuous copy or print cycle, the copier may be needed to quickly run a different job. To interrupt a current job, press the [INTERRUPT] key.

  • Page 45: Account Number

    Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM Before Making Copies Account Number If account numbers have been programmed, use of the copier can be limited to certain people or to a specified number of copies for each account. Note If account numbers have been programmed, the copier cannot be...

  • Page 46: Printing From The Personal Computer

    Konica7115_7118.book Page 21 Tuesday, October 16, 2001 10:51 AM Before Making Copies Printing from the Personal Computer When the optional printer controller is installed, the copier can be used as a printer configured to a computer network. For details of operation, refer to the Printer Controller User Manual. Sending and Receiving Faxes Using the Copier When the optional Fax unit is mounted, fax transmission can be made using this copier.

  • Page 47: Copy Paper

    Konica7115_7118.book Page 22 Tuesday, October 16, 2001 10:51 AM Before Making Copies Copy Paper Paper Specifications The following table specifies the type and size of paper to be used with each tray together with its capacity. 1st Tray Specifications Paper Type •...
  • Page 48 Konica7115_7118.book Page 23 Tuesday, October 16, 2001 10:51 AM Before Making Copies Precautions for Loading Paper Be sure to stick to the paper specifications for each tray, i. e., the paper type, paper size, and capacity, as a paper misfeed could result otherwise.
  • Page 49 Konica7115_7118.book Page 24 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3-24...

  • Page 50: Loading Originals

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Loading Originals Loading Originals Two Ways of Loading the Original The original may be loaded in the Automatic Document Feeder or placed directly on the Original Glass. Choose the appropriate method according to the type of the original.

  • Page 51: Loading Originals In The Automatic Document Feeder

    Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Loading Originals Loading Originals in the Automatic Document Feeder The Automatic Document Feeder automatically feeds originals one page after another and lets the copier scan the data on each original. After the copier completes scanning the data, the Automatic Document Feeder ejects it into its tray.
  • Page 52 Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Loading Originals Loading the Originals Slide the front adjustable Document Guide Plate to the size of the originals. Place the stack of originals face up on the Document Feeder Tray. Is the stack of originals neat? ➜...

  • Page 53: Mixed Originals

    Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Loading Originals Mixed Originals A stack of originals of different sizes can be copied as a set using the Automatic Document Feeder. Originals Copies (APS) Note This feature can be used only if the width of the originals is the same. E.g.: A3L and A4C Making Copies from Originals of Mixed Sizes Slide the front adjustable Document...
  • Page 54 Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Loading Originals Press the front adjustable Document Guide Plate tightly up against the front edges of the originals. Is the stack of originals neat? ➜ The maximum number of originals that can be loaded is ➜...

  • Page 55: Place The Original On The Original Glass

    Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Loading Originals Place the Original on the Original Glass The method for positioning the original differs depending on the type of original being used. Be sure to use the appropriate method that best suits the type of original.

  • Page 56: How To Position A Sheet Original

    Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Loading Originals How to position a sheet original Use the following procedure to position plain paper or an original that is not suitable for use in the Automatic Document Feeder. Raise the Automatic Document Feeder or Original Cover. Place the original face down on the Original Glass.

  • Page 57: Highly Transparent Originals

    Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Loading Originals Highly Transparent Originals When making a copy from OHP transparencies, translucent paper, or other highly transparent original, position the original as detailed below. Raise the Automatic Document Feeder or Original Cover. Place the original face down on the Original Glass.

  • Page 58: Books

    Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Loading Originals Books When copying an open book or magazine, position the original as detailed below. Raise the Automatic Document Feeder or Original Cover. Position the book face down on the Original Glass, with the top of the book toward the rear of the copier and the center of the open book...
  • Page 59 Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Loading Originals 4-10...

  • Page 60: Making Copies

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Making Copies Making Copies Copying The following procedure describes how to place an original and make a basic copy of it. Making a Basic Copy Position the original. ❍ Original Loading (p.4-1) Make the necessary control panel settings.
  • Page 61 Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Making Copies Enter the number of copies to be made from the Key Pad. Any number from 1 to 99 can be entered. Press the [START] key. This will start the copy cycle. To stop the copy cycle in mid- operation, press the [STOP] key.

  • Page 62: Selecting The Paper

    Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Making Copies Selecting the Paper Before making a copy, the tray containing the paper to be used must be selected. Either the paper source is selected automatically when the size of the original is detected, or you specify the specific paper source manually.
  • Page 63 Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Making Copies Manual Paper Selection Position the original. ❍ Original Loading. (p.4-1) Press the [PAPER SIZE] key on the control panel until the desired paper size indicator lights. Make the other necessary settings. ❍...

  • Page 64: Feeding Paper Manually

    Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Making Copies Feeding Paper Manually Paper can be fed manually through the Bypass Tray if you want to copy onto paper that is not loaded in any tray, or if you want to copy onto special paper, such as OHP transparencies, postcards, or cards.

  • Page 65: Making Copies By Using The Bypass Tray

    Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Making Copies Making Copies by Using the Bypass Tray <Manual Bypass Tray> Position the original. ❍ Original Loading (p.4-1) Slide the Paper Guides to the size of the paper. Load a sheet of paper so that the front side of the paper faces down.
  • Page 66 Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Making Copies Make any other necessary settings. ❍ Zoom Ratio (p.5-11) ❍ Image Density (p.5-16) Press the [START] key. If the same settings apply to the second and subsequent sheets of paper, you have only to load the paper in the Bypass Tray: This will automatically start the new copy cycle.
  • Page 67 Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Making Copies <Multiple Bypass Tray> Position the original. ❍ Original Loading (p.4-1) Adjust the Paper Guides and the Bypass Tray Extender to the size of the paper. Load a stack of paper so that the front side of the paper faces down.
  • Page 68 Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Making Copies <Custom Size Input (Bypass Tray)> Slide the Paper Guides to the size of the paper. Gently insert the paper with the front side of the paper facing down until it is stopped. Note that the Bypass Tray location indicator on the control panel lights.
  • Page 69 Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Making Copies Enter the length (mm) of the paper from the Key Pad. Do you know what is the range for the paper length of custom size? ➜ The length can range from 140 mm to 432 mm.

  • Page 70: Specifying The Zoom Ratio

    Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Making Copies Specifying the Zoom Ratio By specifying a zoom ratio, the copy can be enlarged or reduced. Types of Zoom Ratio Description Setting This setting automatically selects the most appropriate zoom ratio based on the size of the original loaded and the paper size selected for use.

  • Page 71: Setting The Zoom Ratio

    Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Making Copies Setting the Zoom Ratio <AMS> Position the original. ❍ Original Loading (p.4-1) Press the [APS/AMS] key on the control panel until the AMS indicator lights. Press the [PAPER SIZE] key on the control panel until the desired paper size indicator lights.
  • Page 72 Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Making Copies <Fixed and Variable Zoom Ratios> Position the original. ❍ Original Loading (p.4-1) Press the [RE] key on the control panel until the desired zoom ratio indicator lights. ❍ To set a custom zoom ratio, press [ ] or [ ] key to reach the desired ratio.
  • Page 73 Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Making Copies X/Y Zoom This setting allows you to enter the zoom ratio for X and Y independently from the Key Pad. Position the original. ❍ Original Loading (p. 4-1) Press the [X/Y ZOOM] key on the control panel to light the X/Y ZOOM indicator.
  • Page 74 Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Making Copies Press the [CLEAR] key to clear the old value for Y (width). Enter the zoom ratio (%) for Y (width) from the Key Pad and then press the [ENTER] key. Do you know the range for the value Y in X/Y Zoom? ➜...

  • Page 75: Adjusting The Image Density

    Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Making Copies Adjusting the Image Density The image density setting can be adjusted in two broad modes, “Text” and “Photo.” Image Density Setting Text mode: The image density can be adjusted either automatically (Auto) or manually in five steps.
  • Page 76 Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Making Copies If you want to adjust the image density manually, press the [ ] or [ ] key to select the desired setting. Do you know how to select Photo? ➜...

  • Page 77: Interrupting A Copy Job

    Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Making Copies Interrupting a Copy Job By selecting the [INTERRUPT] key, a multi-copy cycle can be stopped at any time to make an urgent copy. Note Some functions cannot be interrupted. Also, some settings may not be available when a copy job is interrupted.
  • Page 78 Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Making Copies Make any other necessary settings. ❍ Paper (p.5-3) ❍ Zoom Ratio (p.5-11) ❍ Image Density (p.5-16) Enter the number of copies to be made from the Key Pad and then press the [START] key.
  • Page 79 Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM Making Copies 5-20...

  • Page 80: Advanced Copying

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Advanced Copying Advanced Copying Making 1-Sided Copies This section describes the setting combinations for the various types of originals and copies and the procedure for selecting the appropriate set- tings to produce the intended results. The [ORIGINAL] key and the [COM- BINATION] key on the control panel allow you to make the various setting combinations.
  • Page 81 Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Advanced Copying Dual Page: ➜ The copier makes 1-sided page-by- Original Copies page copies of an open book. Making Settings for 2in1 and 4in1 Copies Load the originals in the Automatic Document Feeder.
  • Page 82 Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Advanced Copying Making Settings for Dual Page Copies Position the original. ❍ Original Loading (p.4-1) Press the [ORIGINAL] key to light the DUAL PAGE indicator. Is your book left-bound or right- bound? ➜...
  • Page 83 Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Advanced Copying Do you know how to set the erase width for each erase function? ➜ The frame erase width can be set in the range between 5 mm and 20 mm, variable in 1-mm increments. The default value is 10 mm. ➜...
  • Page 84 Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Advanced Copying Output Copies (Sort and Group) When copying or printing two or more copies of a document, the copies can be divided either by sets containing a copy of each page (Sort) or by pages (Group).

  • Page 85: Sorting

    Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Advanced Copying Sorting The copies are automatically divided into sets with each set containing a copy of each page. The following three types are available: electronic sort- ing, shift sorting, and crisscross sorting. What is electronic sorting? Important) ✔...
  • Page 86 Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Advanced Copying What is crisscross sorting? Important) ✔ The copier must be equipped with an Automatic Document Feeder, 16MB Memory for Copier or 32MB Memory for Copier and Paper Feed Cabinet or Multiple Bypass Tray. ➜...

  • Page 87: Grouping

    Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Advanced Copying Grouping The copies are automatically divided into stacks with each stack contain- ing copies of the same page. The following two types are available: shift grouping and crisscross grouping. What is shift grouping? Important) ✔...
  • Page 88 Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Advanced Copying Note Crisscross grouping cannot be effected if a Shifting Unit is mounted. Choosing a set for Output Load the originals in the Automatic Document Feeder. ❍ Original Loading (p.4-1) Press the [OUTPUT] key to select the desired output function.

  • Page 89: Erasing Part Of Original Image (Erase)

    Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Advanced Copying Erasing Part of Original Image (Erase) The copier erases a margin of a set width along the edges or erases any other unwanted images. One of the following four different erase functions can be selected: What is Left Erase? ➜...

  • Page 90: Precautions For Erase Position

    Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Advanced Copying Frame + Center Erase can be set only if Dual Page has been selected. (p.6-3) Precautions for Erase Position Note the correct direction of positioning the original when making copies in the Erase mode.
  • Page 91 Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Advanced Copying Setting the Erase Function Position the original. ❍ Original Loading (p.4-1) Press the [ERASE] key to light the desired erase position indicator. Do you know how to set the erase width for each erase func- tion? ➜...

  • Page 92: Reversing Original Tonal Arrangements

    Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Advanced Copying Reversing Original Tonal Arrangements The white part (background) and the black part (text) are reversed on the copy. Original Copy Reverse Image Position the original. ❍ Original Loading (p.4-1) Press the [REVERSE IMAGE] key and make sure that the Reverse Im- age indicator.

  • Page 93: Providing A Image Shift

    Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Advanced Copying Providing a Image Shift The copier provides a file margin along the leading edge for ease in filing. What is Image Shift? Original Copy ➜ The image of the original is shifted to the right to leave a margin along the left edge of the copy.

  • Page 94: Using The Utility Mode

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Using the Utility Mode The Utility mode offers the following subfunctions. Code Name Description User’s Choice Allows you to select the default setting for each of the various functions. Drum Dehumidify Removes dewdrops that have formed on the surface of the PC Drum.

  • Page 95: User's Choice

    Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode User’s Choice The functions set and established on the control panel when the copier is turned ON or the [AUTO RESET] key is pressed are called the default settings.
  • Page 96 Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Default Code Name Setting Setting Details Value Density Priority Auto Manual Photo Manual Density Level (Auto) Lighter Normal Darker Density Level (Manual) Step 1 Step 2 Step 3 Step 4 Step 5 Output Priority...
  • Page 97 Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Default Code Name Setting Setting Details Value Erase Setting (Frame) 10mm 20mm Auto Panel Reset 30 seconds 1 min 2 min 3 min 4 min 5 min Auto Reset disabled Power Save 1 min...
  • Page 98 Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Default Code Name Setting Setting Details Value Paper Auto Detection Inch (3rd Tray) *1 Metric Paper Auto Detection Inch (4thTray) *1 Metric Paper Auto Detection Inch (5thTray) *1 Metric Paper Size Detection Automatic detection...

  • Page 99: Mixed Orig

    (Special Paper Setting OFF) APS disabled, Auto Tray Switching enabled APS disabled, Auto Tray Switching disabled *1: Konica 7118 Only Mixed Orig. Select whether to enable Mixed Orig. as the default setting. The default value is “Mixed Orig. disabled.” Paper Priority Select a paper size or paper source that will be selected automatically when AMS is selected.

  • Page 100: Density Level Priority (Manual)

    Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Density Level Priority (Manual) Set the default value of the density level for the Manual exposure mode. The image becomes lighter toward a smaller number and darker toward a larger number, with “3”...

  • Page 101: Erase Setting (Left, Top, And Frame)

    Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Erase Setting (Left, Top, and Frame) Set the erase width for each of the Left, Top, and Frame Erase copies in the range between 5 mm and 20 mm (in 1-mm increments). The default value is “10 mm”...

  • Page 102: Paper Auto Detection

    Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Paper Auto Detection Select “Metric” if the size of the paper loaded in each tray is designated according to the metric system, such as A4 and B4. Select “Inch” if the size of the paper loaded in each tray is designated according to the inch system, such as Letter.

  • Page 103: Making The User's Choice Settings

    Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Making the User’s Choice Settings User’s Choice Setting Procedure Call the Utility Mode to the Display. ❍ Calling the Utility Mode to the Display (p.7-1) Making sure that “U--” appears on the Display, enter “1”...
  • Page 104 Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Press the [CLEAR] key. This clears the current setting. Enter the new setting from the Key Pad. E.g.: Enter “2” to change Copy Priority to “Manual.” Do you want to correct the setting just entered? ➜...

  • Page 105: Drum Dehumidify

    Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Drum Dehumidify During times of high humidity or when there are sudden rapid changes in humidity (especially when you are using a heater in winter), condensation can form on the surface of the PC Drum, resulting in blotchy copies. In such instances, use the “Drum Dehumidify”...

  • Page 106: Toner Replenisher (Auxiliary Toner Replenishing)

    Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Toner Replenisher (Auxiliary Toner Replenishing) The copier tends to exhaust the supply of toner rapidly when making a number of copies from an original with dark solid areas, such as a photo. As a result, the image density of the copy will become lighter.

  • Page 107: Custom Size Input

    Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Custom Size Input When paper of a nonstandard size is to be loaded in the 1st Tray, use this function to set the custom size. Note Before making this setting, be sure to select “size input” for “Paper Size Detection”...
  • Page 108 Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Press the [CLEAR] key. Enter the value of X (length) of the paper to be loaded from the Key Pad. E.g.: Paper length 300 mm Do you want to change the value just entered? ➜...

  • Page 109: Administrator Mode

    Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Administrator Mode Administrator Mode The Administrator Mode is for the administrator of your copier. When Administrator Mode is selected, it is then necessary to enter the administrator number. The Administrator Mode offers two functions to be set: “Copy Track”...
  • Page 110 Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Enter the 6-digit administrator number from the Key Pad. Do you know how to enter the administrator number? ➜ Enter the six digits successively. Do you want to correct a wrong number just entered? ➜...

  • Page 111: Copy Track

    Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Copy Track Copy Track allows the administrator to keep track of the number of copies made by each account for a total of up to 20 different accounts. Default Code Name...
  • Page 112 Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Making sure that “A--” appears on the Display, enter “1” from the Key Pad. Press the [START] key. Select whether to “enable” or “disable” Copy Track by entering the corresponding number from the Key Pad.
  • Page 113 Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Input Account Procedure (A-2) Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad.
  • Page 114 Konica7115_7118.book Page 21 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Delete Account Procedure (A-3) Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad.
  • Page 115 Konica7115_7118.book Page 22 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Change Account Procedure (A-4) Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad.
  • Page 116 Konica7115_7118.book Page 23 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Total Counter Display by Account Procedure (A-5) Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) Making sure that “Ad-” appears on the Display, enter “1”...
  • Page 117 Konica7115_7118.book Page 24 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode The Display will show the Total Counter value. E.g.: If the Total Counter value is 1,234, then the Display will show something like that shown on the right.
  • Page 118 Konica7115_7118.book Page 25 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Total Counter Clear for All Accounts Procedure (A-6) Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) Making sure that “Ad-” appears on the Display, enter “1”...

  • Page 119: Disable Auto Shut Off

    Konica7115_7118.book Page 26 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Disable Auto Shut OFF The Disable Auto Shut OFF function allows the administrator to “authorize” or “not authorize” the selection of “Auto Shut OFF disabled” under User’s Choice. The default value is “not authorized.”...
  • Page 120 Konica7115_7118.book Page 27 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Enter the new setting from the Key Pad. Do you know the number for “authorize” Disable Auto Shut OFF? ➜ Enter “0.” Press the [START] key. This validates the new setting. 7-27...

  • Page 121: Checking The Total Number Of Copies/Prints Produced

    Konica7115_7118.book Page 28 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Checking the Total Number of Copies/Prints Produced The [COUNTER] key on the control panel allows you to check the total number of copies or printed pages produced since the installation of the copier.
  • Page 122 Konica7115_7118.book Page 29 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode If you want to also check the Size Counter, press the [COUNTER] key a second time. Check that “Sc” appears on the Display. The Size Counter value is then displayed.

  • Page 123: Storing A Job

    Konica7115_7118.book Page 30 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Storing a Job You can store frequently used job settings in memory to call up later for quick job setup. Up to two different settings can be stored: job 1 (Jb1) and job 2 (Jb2).
  • Page 124 Konica7115_7118.book Page 31 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Press the [ENTER] key. The Display changes as shown on the right, indicating that the job has been stored in Jb1. 7-31...
  • Page 125 Konica7115_7118.book Page 32 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode Recalling a Job from Memory Position the original. ❍ Original Loading (p.4-1) Press the [JOB RECALL] key to show the job number to be recalled on the Display. Check that the Display shows the job number you want.

  • Page 126: Error Displays And Other Indicators

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Error Displays and Other Indicators Major Error Displays and Remedial Actions Error Display Possible Cause Action Toner has run out and the Install a new Toner Bottle. copier is no longer able to make “Replacing the Toner Bottle”...
  • Page 127 Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Error Display Possible Cause Action A sheet of misfed paper is left in Identify the misfeed location on the copier. the control panel and remove the sheet of misfed paper.
  • Page 128 Turning OFF, then ON, the copier the copier. will minor malfunciton. If this does not reset the minor malfunction, call your Konica Service Centre and give him or her the malfuncion code being shown on the Display. E.g.: C0510 Fusing...

  • Page 129: When The Add Paper Indicator Lights Up

    Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators When the Add Paper Indicator Lights up If paper runs out during a copy cycle, the Add Paper indicator lights up and the copy cycle is stopped. Identify the specific tray that has run out of paper on the control panel.
  • Page 130 Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Load the paper in the tray so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Have you loaded too much paper in the tray? ➜...
  • Page 131 Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators <2nd Tray> The same procedure applies when loading paper in the 3rd Tray, 4thTray, and 5thTray. Slide out the 2nd Tray. Press down on the Paper Lifting Paper Lifting Plate Plate until it clicks into the locked position.
  • Page 132 Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators <Multiple Bypass Tray> Load the paper in the Bypass Tray. Do you know the special precautions to be used when loading the paper? ➜ Be sure to face the surface to be copied onto down.

  • Page 133: When The Add Toner Indicator Lights Up

    Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators When the Add Toner Indicator Lights up When toner is low, the Add Toner indicator lights up as shown in the illustration. Replace the Toner Bottle with a new one as soon as possible. Note Use only the toner that has been manufactured specifically for this copier.
  • Page 134 Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Sharply tap the new Toner Bottle against a desk or other hard surface four or five times. Then turn the Toner Bottle upside down and tap it the same way again.
  • Page 135 Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Push the Toner Bottle Holder back in and then close the Front Cover. ❍ Toner will be automatically supplied as soon as the Front Cover is closed. Do you know what to do if the copy image density is still low immediately after the Toner...

  • Page 136: When The Paper Misfeed Indicator Lights

    Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators When the Paper Misfeed Indicator Lights If a paper misfeed occurs during a copy cycle, the Paper Misfeed indicator lights and the copy cycle is stopped. Following the misfeed clearing procedures given below, remove all misfed sheets of paper.

  • Page 137: Clearing A Paper Misfeed

    Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Clearing a Paper Misfeed <Inside the Copier> CAUTION The area around the Fusing Unit is extremely hot. ➜ Do not touch any area other than the authorized knobs, to reduce the risk of burns.
  • Page 138 Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Gently pull out the sheet of paper. Lowering the guide plate, gently pull out the sheet of paper. Do you know which part to grasp? ➜ Grasp the green portions to lower the guide plate.
  • Page 139 Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Close the Side Cover of the copier. Slide out the 1st Tray and remove the paper stack left in it. Reload the paper stack in the 1st Tray.
  • Page 140 Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators <Paper Feed Cabinet> Open the Side Cover of the Paper Feed Cabinet. Gently pull out the sheet of misfed paper. Close the Side Cover of the Paper Feed Cabinet.
  • Page 141 Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators <Multiple Bypass Tray> Unload the paper stack from the Bypass Tray. Open the Side Cover of the copier. Gently pull out the sheet of misfed paper. Close the Side Cover.
  • Page 142 Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Load the paper stack back in the Bypass Tray. 8-17...
  • Page 143 Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators <Automatic Document Feeder> Open the Document Feeder Cover. Unload the document from the Document Feeder Tray. Raise the Automatic Document Feeder. 8-18...
  • Page 144 Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Turning the document feed knob in the direction of the arrow, gently pull out the original. Close the Document Feeder Cover. 8-19...
  • Page 145 Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Reload the document which has been unloaded in step 2. Do you know what to do if “-1” is shown on the Display? ➜ Merge the original which has been misfed with the remaining pages of the document for reloading.

  • Page 146: Troubleshooting Tips

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips Troubleshooting Tips When This Type of Copy is Produced Symptom Possible Cause Action The image is too light. The image density is set at Adjust the image density to “Lighter.”...
  • Page 147 Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips Symptom Possible Cause Action The copy has lines. The Original Glass surface is Wipe the Original Glass dirty. clean with a soft dry cloth. (p.10-5) The Original Pad is dirty. Wipe the Original Pad clean with a soft cloth dampened with neutral detergent.
  • Page 148 Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips Symptom Possible Cause Action The image on the copy is not The original is not placed in Place the original correctly aligned properly. the correct position. on the Original Glass against the Original Width Scale.

  • Page 149: When The Copier Is Not Operating Correctly

    Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips When the Copier is not Operating Correctly Symptom Possible Cause Action Nothing is indicated on the Only the [START] key lights The copier is in the Power control panel. green.

  • Page 150: Appendix 10.1 Specifications

    Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Appendix Appendix 10.1 Specifications Copier Konica 7115/7118 Specifications Konica 7115 Konica 7118 Type Desktop Platen Type Stationary Photo conductor Copying System Electrostatic Dry Powdered Image Transfer to Plain Paper Developing System...
  • Page 151 Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Appendix Specifications Konica 7115 Konica 7118 Lost Image Leading Edge: 4 mm Trailing Edge: 4 mm Rear Edge: 4 mm Front Edge: 4 mm Power Requirements 220V to 240V, 15 A, 50/60 Hz Power Consumption 1.5 kW or less...

  • Page 152: Automatic Document Feeder Df-217

    Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Appendix Automatic Document Feeder DF-217 Specifications Document Feeding Sys- Standard Mode: 1-sided original Mixed Original Detection Mode:1-sided original Kinds of Original Standard Mode: Plain paper (50g/m to 110g/m Mixed Original Detection Mode: Plain paper (60g/m to 90 g/m Original Size Standard Mode: A3L to A5L...

  • Page 153: Shifting Unit Is-101

    Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Appendix Shifting Unit IS-101 Specifications Shift Position 28mm Capacity 250 sheets Power Consumption 63 W or less Job Tray IT-102 Specifications Kinds of Paper Plain paper (60g/m to 90 g/m ),recycled paper Special paper: card (91 g/m to 157 g/m ), OHP transparencies,...

  • Page 154: Care Of The Copier

    Chapter10.fm Page 5 Tuesday, October 16, 2001 1:16 PM Appendix 10.2 Care of the Copier Cleaning Turn OFF the copier before cleaning it. Housing Cover ➜ Wipe the surface of the housing cover with a soft cloth dampened with a mild household detergent. Original Pad ➜...

  • Page 155: Function Combination Table

    Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Appendix 10.3 Function Combination Table Function Combination Table Function Set Last Conditions for Combined Functions Code Description The functions can be combined. The functions cannot be combined. (The function set first takes precedence.) ×...

  • Page 156: List Of Paper Sizes And Zoom Ratios

    Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Appendix 10.4 List of Paper Sizes and Zoom Ratios Paper Sizes Name Size (Metric) Size (Inch) A3Wide 311 mm × 457 mm 12-1/4 × 18 297 mm × 420 mm 11-3/4 × 16-1/2 210 mm ×...

  • Page 157: Zoom Ratios(Original Size To Paper Size)

    Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Appendix Zoom Ratios(Original Size to Paper Size) Metric Areas Original Size Paper Size Zoom Ratio 297mm × 420mm 11-3/4 × 16-1/2 210mm × 297mm 8-1/4 × 11-3/4 141% 122% 148mm × 210mm 5-3/4 ×...
  • Page 158 Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Appendix Metric Areas Original Size Paper Size Zoom Ratio 182mm × 257mm 7-1/4 × 10 163% 115% 141% 128mm × 182mm 164% 5 × 7-1/4 115% 200% 141% Inch Areas Original Size Paper Size Zoom Ratio Ledger...
  • Page 159 Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Appendix Inch Areas Original Size Paper Size Zoom Ratio Foolscap Letter 8-1/2 × 14 5-1/2 × 8-1/2 215.9mm × 330.2mm 11 × 17 130% 11 × 14 107% Letter 5-1/2 × 8-1/2 8-1/2 ×...
  • Page 160 Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Index Numerics 2in1 ......................6-1 4in1 ......................6-1 Account Number ................3-20 Adding Paper ..................8-4 Adjusting the Image Density ..............5-16 Administrator Mode ................7-16 Auto ....................3-18 Auto Copy Start .................3-18 Auto Panel Reset ................3-17 Auto Resetting ...................3-17 Auto Shut OFF ...................3-18 Auto Tray Switching ................3-19 Care of the Copier ................10-5...
  • Page 161 Konica7115_7118IX.fm Page 2 Tuesday, October 16, 2001 2:03 PM Index Feeding Paper Manually ..............5-5 Function Combination Table ............. 10-6 Grouping ..................... 6-8 Icons on the Control Panel ..............3-14 Image Shift ..................6-14 Input Account Procedure ..............7-20 Interrupting a Copy Job ..............5-18 Interrupting Copy Jobs ..............
  • Page 162 Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Index Selecting the Paper ................5-3 Setting the Zoom Ratio ..............5-12 Sorting ....................6-6 Special Paper Setting ................7-9 Specifications ..................10-1 Specifying the Zoom Ratio ..............5-11 Storing a Job ..................7-30 Toner Replenisher (Auxiliary Toner Replenishing) ......7-13 Turn ON/OFF the Copier ..............3-15 User’s Choice ..................7-2 Using “APS”...
  • Page 163 Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Index Index-4...

This manual is also suitable for:

7118

Table of Contents