Removing And Reinstalling The Front Left Door; Removing And Reinstalling The Operation Panel - Konica Minolta 7085/FORCE 85 Service Manual

[4] Removing and Reinstalling the Front
Left Door
Caution: Be sure the power cord has
been unplugged from the wall
outlet.
a. Procedure
(1) Open the front left door.
(2) Remove the screw to disconnect the ground
3
cable. (7075 only)
(3) Loosen the two screws securing the hinge.
Caution: When loosening the screws, hold the
top of the door by hand so that it does
not fall down.
(4) Remove the door with the hinge pin held up.
Front left door
Screws
(loosen)
(5) Reinstall the above parts following the removal
steps in reverse.
MODEL
7075/7085
SERVICE HANDBOOK
Ground cable
Screw
MANUAL REVISED EDITION
[5] Removing and Reinstalling the
Operation Panel
Caution: Be sure the power cord has
a. Procedure
(1) Open the RADF.
(2) Remove the two shoulder screws to remove
the original stopper plate (right).
(3) Remove the three shoulder screws to remove
the original stopper plate (rear).
(4) Remove the two shoulder screws to remove
the original stopper plate (left).
(5) Remove the platen glass.
Shoulder
screws
(2)
Shoulder
screws (3)
Original
stopper
plate (left)
DATE
3 - A - 3
Jan. 2002
3
EXTERNAL SECTION
been unplugged from the wall
outlet.
Original
stopper
plate (rear)
Shoulder
screws (2)
Original
Platen glass
stopper plate
(right)
PAGE METHOD
3-A-3 REPLACEMENT