Error Code Table - Konica Minolta 7085/FORCE 85 Service Manual

Konica 7075/force 75; 7085/force 85
Table of Contents

Advertisement

[20] Error Code Table

3
Error Code
K00_00
Connection NG. (No CONNECT from modem, Time out.)
K00_01
No response from other party.
(No detection of start text from host after establishing connection.)
K00_02
Because copying is taking place, it is impossible to write to the
non-volatile RAM and the line is cut.
K00_03
Password does not match.
K00_04
Serial number does not match.
K00_05
Syntactical error. (When undefined commands or parameters come.)
K00_06
Write-in indication on an item for which write-in is impossible.
K00_07
Unread item error.
K00_08
Signal reception time-out after detection other party response.
(After communications of start text have ended.)
K00_09
Serial number registration completed.
K00_10
Communications error due to generation of carrier OFF.
(No CARRIER detected from the modem.)
K00_11
Dial tone (NO DIALTONE detected from the modem.)
K00_12
Busy signal (BUSY) detected from the modem.
K00_13
No ANSWER detected from the modem.
K00_14
Received text error. (Irregular text has received.)
K00_15
The Host computer has not registered the serial number. (4 x 40
text received)
K00_16
Error not defined by the numbers (_00 to _15 above : the last two
digits)
K00_17
The telephone number of the host to be called has not been registerd.
K01_00
DSR went to OFF or in OFF state.
K01_01
Error in making message queue.
K01_02
Error in making task.
K01_03
Error in transmitting message.
K01_04
Error in receiving message.
K01_05
Error (NG) received from timer task.
K02_01
Modem initializing NG.
K03_00
Host calling buffer is full. Impossible to stay any longer.
NOTE: A gray-out error code may occur when copiers send data to the host computer.
MODEL
7075/7085
SERVICE HANDBOOK
Contents
MANUAL
REVISED EDITION
DATE
1 - 65
Jan. 2002
3
25 ADJUSTMENT
Countermeasure
Redial, repeat reception standby.
Redial, repeat reception standby.
Temporarily stop copying.
Check password.
Check serial number.
Redial.
Redial.
Redial.
Redial.
Redial.
Redial.
Redial.
PAGE
METHOD
1-64-1
ADDITION

Advertisement

Table of Contents
loading

This manual is also suitable for:

7075/force 75

Table of Contents