Konica Minolta 7085/FORCE 85 Service Manual page 275

(7) Remove the two screws at the back to detach two
wiring harness clamps.
(8) Remove the two Faston terminals at the back.
Wiring
harness
clamps (2)
Screws (2)
Faston terminals (remove 2)
3
Wiring
harness
clamps (2)
Faston terminals (remove 2)
MODEL
7075/7085
SERVICE HANDBOOK
7075
Faston terminals (2)
7085
Screws (2)
Faston terminals (2)
MANUAL REVISED EDITION
(9) Pull out the fixing heater lamps (L2, L3) from the
front side of the fixing upper roller.
(10) Reinstall the above parts following the removal
steps in reverse.
Caution: When installing new lamps, pay
attention to their orientation. The size
of the lamp terminal mounting hole in
the front lamp fixing plate is different
from that in the rear lamp fixing plate.
The lamp inserted in the fixing upper
roller in the opposite direction cannot
be secured properly.
DATE
3 - O - 5
Jan. 2002
3
FIXING UNIT
Heater lamps (L2, L3)
PAGE METHOD
3-O-3 REPLACEMENT