Table of Contents
Advertisement
4.
RADF skew offset adjustment
Perform this adjustment when replacing the
RADF control board.
Step
1
Enter the 36 mode.
2
[36 Mode Menu Screen]
Press "
2
3
[Image adjustment mode menu Screen]
Press "
4
4
[RADF adjustment mode menu Screen]
Press "
adjustment."
5
[RADF Incline offset adjustment
Screen]
Press the
6
Select A3-size paper, set an adjustment
chart on RADF, and press the Start but-
ton.
7
Check the RADF incline offset.
Specification: 0.5%
8
If the RADF incline offset is not appro-
priate, press the C button while pressing
the P button.
9
[RADF Incline Offset Adjustment
Screen]
Enter a value with the numeric keys and
press the
Setting range: -60 to +60
1 step= 0.05%
10
If the RADF incline offset is not within
specification, repeat steps 5 to 9.
11
Press the
turn to the RADF adjustment mode
menu Screen.
Operation
Image adjustment."
RADF adjustment."
RADF Incline offset
4
key.
COPY SCREEN
key.
SET
key to re-
PREVIOUS SCREEN
[11] Centering Adjustment
Perform this adjustment to center the image in the pa-
per feed direction.
1.
Select
Image adjustment in the 36 Mode Menu
2
Screen to display the Image Adjustment Menu
Screen.
2.
Press
Centering adjustment in the Image
5
Adjustment Menu Screen to display the Centering
Adjustment Menu Screen.
3.
Centering adjustment consists of the following:
Printer centering adjustment
1
Scanner centering adjustment
2
RADF centering adjustment
3
4.
Press the button corresponding to the item to ad-
just.
The adjustment screen of the selected item ap-
pears.
5.
The Centering adjustment mode menu Screen
reappears when adjustment completes.
6.
Press the
PREVIOUS SCREEN
Adjustment Menu Screen to return to the Image
Adjustment Menu Screen.
1 - 83
36 ADJUSTMENT
key in the Centering
Advertisement
Chapters
Table of Contents
