Cleaning The Vertical Conveyance Ps/ Loop - Konica Minolta 7085/FORCE 85 Service Manual

[5] Cleaning the Vertical Conveyance
PS/Loop PS
Caution: Be sure the power cord has Caution: Be sure the power cord has
been unplugged from the wall been unplugged from the wall
outlet. outlet.
a. a. Procedure Procedure
(1) Remove the vertical conveyance unit. (1) Remove the vertical conveyance unit.
(2) Clean the vertical conveyance PS (PS53) and (2) Clean the vertical conveyance PS (PS53) and
loop PS (PS54) using a blower brush. loop PS (PS54) using a blower brush.
3
(3) Reinstall the above parts following the removal (3) Reinstall the above parts following the removal
steps in reverse. steps in reverse.
MODEL
7075/7085 SERVICE HANDBOOK
Loop PS (PS54)
Vertical conveyance PS 2
(PS53)
MANUAL REVISED EDITION
VERTICAL CONVEYANCE SECTION
DATE
3 - M - 3
Jan. 2002
3
PAGE METHOD
3-M-3 REPLACEMENT