Konica Minolta 7085/FORCE 85 Service Manual page 693

UNPACKING AND INSTALLATION PROCEDURE
I. Installation Space
<Main Body>
Fig. 01
475 887
<Main Body + Finisher + LCT>
Fig. 02
100 870
II. Confirmation Prior To Installation
1. Select a flat and stable place suitable for installing
the machine.
2. Confirm that the voltage and the frequency meet
the product specifications, and that the current
capacity of outlet meets or exceeds the
capacity specified.
3. Connect the machine directly to a dedicated
power outlet. (Do not use an extension cord.)
4. Do not plug or unplug the power cord with wet or
dirty hand. (May cause an electrical shock.)
5. Do not install the machine in a place with high
temperatures or high humidity, or in direct sun-
light.
6. Do not install the machine in a dusty place, and/
or near volatile flammable substances.
7. Do not install the machine in a poorly ventilated
place.
FOR THE MAIN BODY AND OPTIONS
(Unit:mm)
775 120
887 386 100
III. Unpacking
[1] Package Size
Fig. 03
Main body
1096
Packed weight: 320kg
Number of units that can be stacked on top of each other: 3 max
[2]Unpacking the Main body
Fig. 04
RADF pad
Upper block
(left)
Upper block
(middle)
Corner
pad
Front block
Cushion left
(B)
Cushion left
(C)
Cushion front (D)
E-1
Applied Machine : Konica 7085
Unit : mm
961
Veneer
Upper block
(right)
Accessory box
Bottom pad
Cushion rear (A)
Cushion front (E)
56GA97360
Corner
pad