Paper Feed Height (Upper Limit) Adjustment - Konica Minolta 7085/FORCE 85 Service Manual

OTHER ADJUSTMENT
4. LCT spring pressure adjustment
Spring
Strong Weak
a. Adjustment method
Step
1 Remove the LCT from the main body.
2 Change the spring hooking position.
Weak: Double feed is prevented.
Strong: No feed is prevented.
Reference: The spring load changes
3 Install the LCT.
Operation
about 10% each time the
spring is hooked in the next
slit.
[6] Paper Feed Height (Upper Limit)
Adjustment
Caution 1: Paper feed height (upper limit)
Caution 2: This adjustment may affect the
1. Tools
• Screwdriver (Phillips)
• Scale
2. Adjustment of paper feed height (upper limit)
of tray 1/2/3
Paper
up/down
plate
Paper feed guide
1 - 114
adjustment must be performed
when no paper feed occurs, when
the leading edge of the fed paper
is folded or when a convexly curled
paper is fed. To perform this
adjustment, move the upper limit
sensor mounting bracket vertically.
release amount of the pick-up so
that [7] pick-up roller release
amount adjustment must be
performed after this adjustment.
Screws
Sensor mounting bracket