Replacing The Exposure Lamp - Konica Minolta 7085/FORCE 85 Service Manual

(11) Remove the two screws to detach the CCD unit.
Screws (2)
(12) Reinstall the above parts following the removal
steps in reverse.
MODEL
7075/7085
SERVICE HANDBOOK
CCD unit
MANUAL REVISED EDITION

[3] Replacing the Exposure Lamp

Caution 1. Be sure the power cord has
Caution 2. Do not touch the exposure
Caution: Be sure to perform image adjustment
after installing the exposure lamp.
(See "ADJUSTMENT.")
a. Procedure
(1) Remove the original stopper plates (right, rear,
and left), platen glass, and top cover (middle).
(See "EXTERNAL SECTION.")
(2) Move the exposure unit to the notch in the main
body frame on the paper exit side.
(3) Remove one screw and detach the cable clamp.
3
(7085 only)
DATE
3 - C - 5
Jan. 2002
3
READ SECTION
been unplugged from the wall
outlet.
lamp with bare hands.
Screws
Cable clamp
Exposure lamp
PAGE METHOD
3-C-3 REPLACEMENT