Konica Minolta 7085/FORCE 85 Service Manual page 422

36 ADJUSTMENT
No. 1 Overall halftone
[Check item]
• When density is set to 70 (halftone)
If there are white stripes, black stripes, or uneven density, determine whether the fault is with the
scanner or the printer.
• When density is set to 0 (white)
If the test pattern is blurred, determine whether the fault is with the scanner or the printer.
• When density is set to 255 (black)
If the density is light, determine whether the fault is with the scanner or the printer.
* The above density settings are typical values. See [16] Test Pattern Density Setting for more infor-
mation on density setting.
Test patterns
DENSITY SET TO 70 DENSITY SET TO 0
1 - 88
DENSITY SET TO 255