BY-PASS TRAY
[1] Removing and Reinstalling the By-
pass Tray
Caution: Be sure the power cord has
been unplugged from the wall
outlet.
a.
Procedure
(1) Remove the right side cover (upper). (See "EX-
TERNAL SECTION.")
(2) Detach the main body cooling fan 4 (FM12). (See
3
"WRITE SECTION": 7085 only)
(3) Disconnect the connector (CN254).
(4) Remove the four screws to remove the by-pass
tray.
(5) Reinstall the above parts following the removal
steps in reverse.
MODEL
7075/7085
SERVICE HANDBOOK
Connector (CN254)
Screws (4)
By-pass tray
MANUAL
REVISED EDITION
[2] Cleaning the Paper Size Detection
Sensors
a.
Procedure
(1) Open the bypass tray.
(2) Clean the two paper size sensors (PS55, PS56)
with a blower brush.
Paper size PS 1
(By-pass tray)
(PS55)
DATE
3 - L - 1
Jan. 2002
3
BY-PASS TRAY
Paper size PS 2
(By-pass tray)
(PS56)
PAGE
METHOD
3-L-1
REPLACEMENT