Removing And Reinstalling The Paper Reverse/Exit Switchover Gate - Konica Minolta 7085/FORCE 85 Service Manual

ADU UNIT
(6) Remove the three E-rings and one bearing from
the paper reverse/exit unit entrance roller.
E-ring
Paper reverse/exit unit
entrance roller
(7) Reinstall the above parts following the removal
steps in reverse.
MODEL
7075/7085
SERVICE HANDBOOK
E-rings
Bearing
MANUAL REVISED EDITION
3 - N - 22
[21] Removing and Reinstalling the
Paper Reverse/Exit Switchover Gate
Caution: Be sure the power cord has
been unplugged from the wall
outlet.
Warning: The interlock which is turned
OFF when the front right or left
door opens/closes, should
never been turned ON forcibly
with the ADU stand drawn out.
a. Procedure
(1) Draw out the ADU stand from the main body.
(2) Remove the two screws to detach the paper
reverse/exit unit cover.
3
Paper reverse/exit unit cover
Screws
(3) Remove one screw to release the gate drive
fitting.
(4) Remove each E-ring and bearing from the front
and rear.
DATE
Jan. 2002
3
7085 only
7085 only
PAGE METHOD
3-N-22 REPLACEMENT