Page 2 Automatic Duplex Copying To reduce paper consumption, use this function to make double-sided (duplex) copies, automatically. We recommend that you utilize the Auto Low Power function, the Automatic Shut-Off function, and the Automatic Duplex Copying function. Konica 7075 NERGY ® Program...
Page 3 © 2000 by Konica Business Technologies, Inc. MAINTENANCE AGREEMENT The KONICA 7075 Workgroup Document System™ will give you many years of trouble-free service. To ensure high quality copying performance and to prevent premature wear and failure of precision parts and components, periodic cleaning and routine adjustments should be scheduled.
Page 4 Notes...
Page 5: Table Of Contents
Control Panel with Interactive Touch Screen ... 1-2 Overview of the User’s Manual ... 1-3 Help Mode ... 1-3 Product Overview ... 1-4 Features of the Konica 7075 ... 1-5 Copier Features ... 1-11 Standard Equipment ... 1-11 Optional Equipment ... 1-11 Section 2: Safety Information User Instructions ...
Page 6 Contents Section 3: Machine Information (continued) Automatic Magnification Selection (AMS) ... 3-11 Automatic Exposure Selection (AES) ... 3-11 Automatic Tray Switching (ATS) ... 3-11 Lead Edge Delete ... 3-12 Service Settings ... 3-12 Finisher-Paper Capacity ... 3-12 Key Operator Password ... 3-12 ECM Master Key Code ...
Page 7 Contents Section 5: Copier Management Power Saver Mode ... 5-2 Auto Low Power ... 5-2 Manual Low Power ... 5-3 Auto Shut-Off ... 5-4 Manual Shut-Off ... 5-4 Entering an ECM Password ... 5-5 Weekly Timer Function ... 5-6 Timer Interrupt ... 5-6 Counter List ...
Page 8 Contents Section 6: Basic Operations (continued) Rotation ... 6-31 90 Rotation ... 6-31 90 Rotation and APS ... 6-31 90 Rotation and AMS ... 6-32 180 Rotation ... 6-33 To Release Automatic Rotation ... 6-34 Check Mode and Proof Copy... 6-35 Interrupt Mode...
Page 9 Contents Section 9: Applications Application Function Menu ... 9-2 Sheet/Cover Insertion ... 9-3 Chapter ... 9-8 Combination ... 9-10 Booklet ... 9-12 Transparency Interleave ... 9-15 Image Insert ... 9-17 Book Copy ... 9-19 Program Job ... 9-21 Non-Image Area Erase ... 9-23 Reverse Image ...
Page 10 Contents Section 12: Shortcuts Set Reserve Job ... 12-2 Store Originals Scanned from Platen ... 12-2 Store Originals Scanned from RADF ... 12-2 Stapling & Folding, Folding, and Trimming ... 12-3 Mixed Original ... 12-3 Sheet/Cover Insertion ... 12-3 Chapter ... 12-4 Combination ...
Page 11 Contents Section 13: Key Operator Mode (continued) ECM (Electronic Copy Monitor) Function Setting [4] ... 13-15 How to Access the ECM Setting Mode ... 13-16 E.C.M. Data Edit [1] ... 13-17 E.C.M. All Count Reset [2] ... 13-21 E.C.M. Function Setting [3] ... 13-22 Lock/Delete Job Memory [5] ...
Page 12 Contents Section 14: Maintenance & Supplies (continued) Preventive Maintenance ... 14-10 Reading the PM Count ... 14-10 Printing the PM Count ... 14-10 Cleaning the Left Partition Glass ... 14-11 Cleaning the Document Glass and Cover ... 14-11 Service, Repairs, Supplies ... 14-12 Section 15: Troubleshooting Call for Service ...
Page 13 To the User Key Operator Functions Copier Service, Repairs & Supplies Machine Labels Control Panel with Interactive Touch Screen Overview of the User’s Manual Help Mode Product Overview Features of the Konica 7075 Copier Features Standard Equipment Optional Equipment Introduction 1-1...
Page 14: Section 1: Introduction
Sample machine safety labels are shown in Section 2: Safety Information . Control Panel with Interactive Touch Screen The 7075 control panel is user friendly and easy to operate. The far right portion of the panel displays the Timer indicator and buttons to select Power Saver On/Off, Interrupt, Proof Copy and Stop.
Page 15: Overview Of The User's Manual
Introduction To the User (continued) Overview of the User’s Manual To enjoy optimal performance, read this manual before using the copier. Be sure to handle the machine and perform all copying operations only as recommended in the manual. Keep the manual located with the machine so that all users may refer to it, as needed. Manual Organization: This manual includes thirteen topic sections and Specifications of the product.
Page 16: Product Overview
Introduction Product Overview The Konica 7075 is a digital printer/copier that can be used as a stand-alone copier, or it can be used as a high-speed network printer when connected to the optional IP-601 Image Processor. The Konica 7075 can also be used as a print server on a network operating system.
Page 17: Features Of The Konica 7075
Introduction Features of the Konica 7075 • 600dpi Mode Scan in higher resolution (600dpi) than in normal mode (400dpi). • All-Image Area Make copies printed completely to the edges to avoid image loss. • AES - Automatic Exposure Selection Automatically adjust exposure to compensate for the original.
Page 18 Introduction Features of the Konica 7075 (continued) • Chapter Start chapter pages on the right side (front pages) of the finished document. Only duplex mode (1-2 or 2-2) is compatible. • Combination Copy a fixed number (2, 4, or 8) of pages onto one sheet of copy paper.
Page 19 Introduction Features of the Konica 7075 (continued) • Image Shift Create or remove a binding margin at the top, bottom, right and left edges (shift amount from 0mm ~ 250mm in 1mm increments); reduce image to prevent image loss (reduce &...
Page 20 • Non STD Size for Original Identify the special original size which the 7075 could not detect in order to select the optimal paper size for copying or printing. • Output mode for Machine with FS-108/108B Finisher Installed:...
Page 21 (10 ~ 150mm) permits in manual or auto. • Reserve Scan in subsequent copy jobs while the 7075 is busy printing or copying. • Resolution (High, Very High) High resolution mode and Very High resolution mode provide optimal image quality for photos and complicated graphics and text that require high to very high compression amounts.
Page 22 Introduction Features of the Konica 7075 (continued) • Stamp/Overlay Imprint a stamp, watermark, or scanned image onto the copy image. • Staple Select the stapling position and number of staples (3 positions). • STD Size (Special) Detect the standard paper sizes which cannot normally be detected (A4R and A5) when loaded in a main body tray.
Page 23: Copier Features
Introduction Copier Features Standard Equipment Main Body with 3 Paper Trays (500/500/1,000 sheets) Reversing Automatic Document Feeder (RADF) (DF-313) Automatic Duplex Unit (ADU) Configuration Options: with Multi-Sheet Bypass Tray (150 sheets) Optional Equipment Stapler Finisher (FS-108) This finisher is equipped with two exit trays. Secondary (sub) tray: Four output types can be specified on the Finisher Mode Selection Screen.
Page 24 Introduction Copier Features (continued) Optional Equipment (continued) Stapler Finisher (FS-108B) (continued) Booklet tray: Stapled and folded, or simply folded booklets are to be delivered onto this tray. These two finishing modes can be specified on the Finisher Mode Selection Screen. Trimmer unit tray: This tray is attached to a trimmer unit (option) installed on the stapler finisher (FS-108B).
Page 25 Section 2: Safety Information User Instructions Machine Labels Label Locations Regulations FCC Regulations Canadian Department of Communications Regulations FDA Regulations Machine Installation and Power Requirements Machine Handling and Care Routine Safety Finisher Capacity Requirements Safety Information 2-1...
Page 26: Section 2: Safety Information
Safety Information User Instructions The following pages include important safety information, which should be read and understood before you attempt to operate the machine. If you have any concerns about safety matters, please contact your service representative. Keep this manual permanently located with the machine, and in good, legible condition.
Page 27: Machine Labels
Safety Information Machine Labels Label Locations ATTENTION CAUTION This internal area is very Cette zone interne est très chaude. Pour éviter hot. To avoid getting de se brûler, NE PAS LA burned, DO NOT TOUCH. TOUCHER. (Both sides of the fixing unit) CAUTION ATTENTION CAUTION...
Page 28: Safety Information
Safety Information Machine Labels (continued) Label Locations (continued) Tray 3 (FS-108B only) CAUTION Inside the lower paper exit outlet is the roller drive unit. DO NOT put your hand into it; otherwise you may be injured. 2-4 Safety Information Tray 1 CAUTION ATTENTION PRECAUCION...
Page 29 Safety Information Machine Labels (continued) Label Locations (continued) • Avoid getting burned. Do not touch any machine area that you are advised not to touch by a warning/caution label. • Do not remove warning/caution labels. If any warning/caution label is removed or if any warning/caution label or caution indicator is illegible due to soilage, clean the label.
Page 30: Regulations
Regulations FCC Regulations Warning: The Konica 7075 generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, interference with radio communications may result. This equipment has been tested and found to comply...
Page 31: Machine Installation And Power Requirements
Safety Information Machine Installation and Power Requirements CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR MACHINE DAMAGE FIRE PREVENTION Install machine away from flammable or volatile materials. Routinely check for abnormal heat from power cord and/or plug. SHORT CIRCUIT FROM WATER DAMAGE Do not install or operate this equipment outdoors near a lake, pond, or river, etc.;...
Page 32 Safety Information Machine Installation and Power Requirements (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE, OVERHEATING, RISK OF ELECTRICAL SHOCK, AND/OR PERSONAL INJURY PLUG SOCKET A plug socket is limited in capacity. Use an exclusive power source for this machine; otherwise, an accident from overheating and/or smoking may occur.
Page 33: Machine Handling And Care
Safety Information Machine Handling and Care WARNING: FAILURE TO HEED THE FOLLOWING WARNING MAY RESULT IN DEATH OR SERIOUS INJURY AND/OR MACHINE DAMAGE MACHINE CONTACT Never touch internal high voltage area indicated with a WARNING label. Never touch the drum surface. Never put your hand into the developing unit when removing mishandled paper.
Page 34: Routine Safety
Safety Information Routine Safety CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE, OVERHEATING, AND/OR PERSONAL INJURY PERIODIC CHECK Check for loose connection or excessive heat on power plug, damage to power cord and/or plug (creased, frayed, scratched or cut, etc.). Be sure the plug is inserted fully, and ground wire is connected correctly.
Page 35: Finisher Capacity Requirements
500 sheets (5.5"x8.5"R) 3,000 sheets (8.5"x11", 8.5"x11"R) 1,500 sheets (11"x17", 8.5"x14") The Secondary (sub) tray can be unloaded while the 7075 is running. Set production is not limited by the capacity of the Secondary (sub) tray. Primary (Main) tray: Staple-Sort mode 1,000 sheets* (11"x17"...
Page 36 Safety Information Finisher Capacity Requirements (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR MACHINE DAMAGE FS-108B FINISHER BOOKLET MODE OUTLET Inside the Booklet mode outlet is the roller drive unit. DO NOT put your hand into it when removing the folded or stapled &...
Page 37 Section 3: Machine Information Machine Configuration External Machine Call-Outs Internal Machine Call-Outs Optional Equipment Site Requirements Control Panel Layout Auto/Reset Mode Automatic Paper Selection (APS) Automatic Magnification Selection (AMS) Automatic Exposure Selection (AES) Automatic Tray Switching (ATS) Lead Edge Delete Service Settings Finisher-Paper Capacity Key Operator Password...
Page 38: Section 3: Machine Information
Machine Information Machine Configuration External Machine ! 8 L CD touch screen ! 9 C ontrol panel ! 7 F S-108/108B Finisher (option) ! 4 P ower switch ! 3 L eft side cover (not shown) ! 2 F ront door ! 1 L eft door ! 7 F S-108B Finisher (option) ! 6 T rimmer...
Page 39: External Machine Call-Outs
Machine Information Machine Configuration (continued) External Machine Call-outs 1 RADF (Reversing Automatic Document Feeder) automatically feeds multiple originals one at a time to the platen glass for copying. 2 Work table provides a convenient workspace for documents both before and after copying. 3 Multi-sheet bypass tray used for small quantity copying onto plain paper or special paper.
Page 40: Internal Machine Call-Outs
Machine Information Machine Configuration (continued) Internal Machine iConveyance part uFixing part yKnob Internal Machine Call-outs 1 Toner bottle holds toner and is to be replaced when supplying toner. 2 Toner unit holds the toner supply. 3 Drum unit forms the copy image. 4 Lever A can be moved to withdraw the conveyance fixing unit for removal of mishandled paper.
Page 41: Optional Equipment
Machine Information Machine Configuration (continued) Optional Equipment FS-108/108B Finisher details Cover sheet feeder (option): Holds cover sheets for use in Cover Sheet output mode or a copied set in manual stapling mode. Primary (main) tray: Holds sets ejected in q Sort mode (offset) w Staple-sort mode e Group mode (offset) Booklet tray (FS-108B only)
Page 42: Machine Information
Machine Information Machine Configuration (continued) Optional Equipment (continued) TU-108 Trimmer unit details Trimmer unit tray: slides to the left side each time a trimmed booklet is delivered. Trimmer unit knob: can be turned to ease removal of mishandled paper. Trimmer pressure release lever: opens to allow removal of mishandled paper.
Page 43: Site Requirements
(1762) Konica 7075 15.7 (400) (100) 15.2 34.95 (386) (887) 63.1 (1603) 47.4 (1203) 20.9 (530) Konica 7075 + FS-108/108B + LT-401 Unit: inches (mm) 30.5 37.4 (775) (950) 72.6 (1845) Unit: inches (mm) 37.4 30.5 (775) (950) 72.6 (1845)
Page 44 3-8 Machine Information 24.6 34.95 (626) (887) 30.3 (770) 135.0 (3430) Konica 7075 + FS-108B + TU-108 + LT-411 Unit: inches (mm) 37.4 15.7 (950) (100) (400) 63.1 (1603) 47.4 (1203) 72.6...
Page 45: Control Panel Layout
2 CHECK displays a screen showing all settings that are selected for the current job. 3 MODE switches the machine operation mode to copy, scanner/server, and printer in turn. 4 KEYPAD enters numeric values.
Page 46: Touch Screen
Machine Information Touch Screen The touch screen is an LCD that displays interactive screens with touch sensitive keys for making copy job selections. Selections are highlighted at the touch. The screens also work with the conventional control panel keys. CAUTION: The touch screen of the control panel is covered with glass. Do not drop heavy items on the glass, or put excess weight or pressure on it;...
Page 47: Initial Settings
Machine Information Initial Settings Initial settings represent the initial condition when power is turned on; when ECM password is set; or when Auto/Reset mode is restored, either manually or automatically. Print Quantity; 1 Magnification Ratio: 1:1 (key operator setting) RADF: ON (key operator setting) Copy mode: 1-1 mode (key operator setting) AES: (Automatic Exposure Selection) : ON (key operator setting) APS: (Automatic Paper Selection): ON (key operator setting)
Page 48: Lead Edge Delete
DIP switch settings. Contact your service representative if setting change is required. Finisher-Paper Capacity In the default condition, the 7075 will produce unlimited sets. If required, service can set the copier to stop copying when the number of copies exceeds specified capacity. Key Operator Password Service can set a 4-digit Key operator password to access the Key Operator Mode Screen.
Page 49: Staple Sheet Capacity
Machine Information Service Settings (continued) Staple Sheet Capacity Staple capacity is changeable, and may be set to 45, 40, or 35 by service. Notice Message: ADD TONER/ PM CALL Service can set the copier message area to display “ADD TONER” when the toner supply is low, or “PM CALL”...
Page 50 Notes...
Page 51 Section 4: Paper Information Positioning Originals on the Platen Glass Positioning an Original for Manual Copying Using the Reversing Automatic Document Feeder (RADF) Paper in Large Capacity Tray (LT-401) (Option) Paper in Large Capacity Tray (LT-411) (Option) Paper in Multi-Sheet Bypass Tray Paper in FS-108/108B Finisher (Option) FS-108/108B Finisher Primary (Main) Tray FS-108/108B Finisher Secondary (Sub) Tray...
Page 52: Section 4: Paper Information
Paper Information Positioning Originals on the Platen Glass Positioning an Original for Manual Copying Use the platen glass when originals are not suitable for use with the document feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or in generally poor condition.
Page 53: Using The Reversing Automatic Document Feeder (Radf)
Paper Information Using the Reversing Automatic Document Feeder (RADF) Specifications in 1-1, 1-2, 2-2, 2-1 Copying Original size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, A4 (297mm x 432mm~140mm x 216mm) Original weight: 13 lb~34 lb Max. feeder capacity: 100 original sheets (20 lb bond paper) Max.
Page 54: Positioning Originals
Paper Information Using the Reversing Automatic Document Feeder (RADF) (continued) Positioning Originals The document feeder (RADF) automatically feeds up to 100 originals directly to the platen glass, starting with the top sheet. The RADF should only be used for unstapled, unfolded, smooth, flat originals.
Page 55: Positioning An Sdf Original
Paper Information Using the Reversing Automatic Document Feeder (RADF) (continued) Positioning an SDF Original In the SDF mode, one thick original can be fed through the RADF original tray. Original size: 11"x17" to 5.5"x8.5" Original weight: 13 lb~34 lb (2-1 and 2-2 copying) 13 lb~110 lb (200 g/m Max.
Page 56: Positioning Mixed Originals
Paper Information Using the Reversing Automatic Document Feeder (RADF) (continued) Positioning Mixed Originals Mixed size originals can be copied together from the document feeder in either APS mode or AMS mode. In APS mode, copies will be output on mixed paper sizes to match the originals.
Page 57: Paper In Main Body Trays
Paper Information Paper in Main Body Trays Standard Paper Size: 11"x17", F4, 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A3, B4, A4, A4R, B5, B5R, A5 (user-adjustable) NOTES: • F4; 8"x13", 203mm x 330mm A3; 11.69"x16.54", 297mm x 420mm B4; 10.11"x14.33", 257mm x 364mm A4;...
Page 58: Paper In Large Capacity Tray (Lt-411) (Option)
Paper Information Paper in Large Capacity Tray (LT-411) (Option) Standard Paper Size: 11"x17", F4, 8.5"x14", 8.5"x11", 8.5"x11"R, A3, B4, A4, A4R (service-adjustable) Wide Paper Size: 11"x17"W, F4W, 8.5"x14"W, 8.5"x11"W, 8.5"x11"WR, A3W, B4W, A4W, A4WR (service-adjustable) Paper Weight: 16~24 lb LCT specified in Thick 1; 25~45 lb LCT specified in Thick 2;...
Page 59: Paper In Fs-108/108B Finisher (Option)
Paper Information Paper in FS-108/108B Finisher (Option) In-Bin Stapler Finisher FS-108/108B accepts LEDGER (11"x17"), LEGAL (8.5"x14") and LETTER/R (8.5"x11"/R) standard/wide paper sizes (5.5"x8.5"R/W in Non-sort, Sort or Group mode). FS-108/108B Finisher Primary (Main) Tray In-Bin Stapler Finisher FS-108/108B (capacities at 20lb, unless otherwise indicated) Non-sort/Sort/Group mode: 500 sheets 5.5"x8.5"/5.5"x8.5"W, 5.5"x8.5"R/5.5"x8.5"WR (A5/A5W, A5R/A5WR) 3,000 sheets 8.5"x11"/8.5"x11"W, 8.5"x11"R/8.5"x11"WR (A4/A4W, A4R/A4WR,...
Page 60: Fs-108B Finisher Booklet Tray
Paper Information Paper in FS-108/108B Finisher (Option) (continued) FS-108B Finisher Booklet Tray Folding mode: Standard Paper Size Wide Paper Size Paper Weight Number of Folded Sheet : 3 sheets max. Booklet Tray Capacity Stapling & Folding mode: Standard Paper Size Wide Paper Size Paper Weight Number of Folded Sheet : 16 sheets max.
Page 61: Paper In Trimmer Unit (Tu-108) (Option)
Paper Information Paper in Trimmer Unit (TU-108) (Option) Trimming mode: Paper Size Paper Weight Number of Trimmed Sheet : 3 sheets max. with Folding mode Trimming Width Trimmer Unit Tray Capacity : Approx. 512 sheets max. Paper Weight Compatibility Chart RADF Main Body Trays Large Capacity Tray...
Page 62 Notes...
Page 63 Section 5: Copier Management Power Saver Mode Auto Low Power Manual Low Power Auto Shut-Off Manual Shut-Off Entering an ECM Password Weekly Timer Function Timer Interrupt Counter List To Display Counter List To Print Counter List Copier Management 5-1...
Page 64: Section 5: Copier Management
Copier Management Power Saver Mode There are two modes for the Power saver as described below. Low power mode enables you to conserve energy by maintaining a lower fixing temperature during periods of copier inactivity. Shut-off mode conserves even more energy by partially turning OFF the power supply. Auto Low Power This function automatically lowers the power after a specified period of copier inactivity.
Page 65: Manual Low Power
Copier Management Power Saver Mode (Continued) Manual Low Power Press [ POWER SAVER ON/OFF to activate the Low power mode. NOTE: The Manual low power setting can be selected by Key operator. For the key operator setting, see p. 13-40 to p. 13-45. When selecting the Manual low power setting, the Manual shut-off setting is released.
Page 66: Auto Shut-Off
Copier Management Power Saver Mode (continued) Auto Shut-Off This function automatically shuts off the main power after a specified period of copier inactivity. The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes. Initially, Auto shut-off is set to function after 90 minutes of copier inactivity. For the key operator setting, see p.
Page 67: Entering An Ecm Password
Copier Management Entering an ECM Password An ECM password is required only when the Electronic Copy Monitor (ECM) feature is activated; a User Password is assigned; and “Enter E.C.M. password” is displayed on the touch screen. 1 Enter your 8-digit ECM password, using the keypad. If the ECM password is invalid, the copier will reset to the Initial mode.
Page 68: Weekly Timer Function
Copier Management Weekly Timer Function When a copier is under control of the weekly timer function, the TIMER indicator on the right side of the control panel is lit. Important: When the TIMER indicator is lit, the copier will automatically be turned off. Do not turn it off by pressing power switch.
Page 69: Copier Management
Copier Management Weekly Timer Function (continued) 2 Enter a 4-digit number timer interrupt password using the keypad on the control panel. If an invalid password is entered, continue by entering the valid 4-digit password. Timer interrupt mode Enter password 3 Press the [START]. Input copy time 0 hour(s) 4 Enter a 1-digit hour (ex.
Page 70: Counter List
This function allows you to view the current indication of the following items as a list on the touch panel: Total counter, Copier counter, Printer counter, Counter start date. Check the list, then print it from the Counter List Screen, if desired.
Page 71 Section 6: Basic Operations How to Make a Basic Copy 1s2 Copy Mode Using Platen Glass Automatic Exposure Selection (AES) Manual Mode (Lighter, Normal, Darker) Automatic Paper Selection (APS) Automatic Magnification Selection (AMS) Selecting a Special Ratio for Non-Standard Paper Preset and User Set Ratios Programming Copy Size for UNIV.
Page 72: Section 6: Basic Operations
Basic Operations How to Make a Basic Copy The Basic Screen When power is turned on, the Basic Screen displays after warm-up; when Auto Power Saver mode is activated; when ECM password is set; when Key counter is used; or when Auto/Reset mode is manually or automatically restored.
Page 73: Basic Operations
Basic Operations How to Make a Basic Copy (continued) The Basic Screen (continued) 1 Position the original document in the document feeder or on the platen glass. 2 Press [ ] to start copying with initial settings; or make other selections, then START press [ START...
Page 74: Copy Mode
Basic Operations Copy Mode Copy Mode Specifications: Incompatible functions 1-1: Folding/Stapling & Folding with Booklet; Chapter; Booklet 1-2: Transparency interleave 2-1: Folding/Stapling & Folding with Booklet; Chapter; Booklet; Repeat; AUTO layout; Non-image area erase, Server function 2-2: Repeat; Transparency interleave; Non-image area erase, Server function RADF capacity 1-1, 1-2, 2-2, 2-1: 100 sheets (copying can be resumed after removing paper from bins)
Page 75: Copy Mode Using Radf
Basic Operations Copy Mode (continued) Copy Mode Using RADF Before selecting the Copy Mode shown on the screen below, read specifications on the previous page and see Section 4 for information on positioning originals. Basic Screen (with 1s2 mode selected) 1 Touch the desired mode key A copy mode key will appear dimmed if it is incompatible with other selections made.
Page 76: 1S2 Copy Mode Using Platen Glass
Basic Operations Copy Mode (continued) 1s2 Copy Mode Using Platen Glass When copying in 1-2 mode from the platen glass, use the Platen store mode. Refer to p. 4-2 for details on positioning originals. Basic Screen (with 1s2 mode and store mode) 1 Open the document feeder.
Page 77: Copy Density
Basic Operations Copy Density Automatic Exposure Selection (AES) AES operates with the initial settings. It detects the density of the original image and automatically selects the appropriate exposure for the copy. Manual Mode (Lighter, Normal, Darker) Select manual copy density to adjust exposure (density) when originals are too light or too dark.
Page 78: Density Shift
Basic Operations Copy Density (continued) Density Shift Density shift divides each of nine density levels into two levels of lighter and three levels of darker. Density shift can be used in 4 density modes; Auto (Text/photo), Text, Photo, and Increase contrast. 1 Touch SPECIAL ORIGINAL 2 Select the density mode.
Page 79 Basic Operations Copy Density (continued) Density Shift (continued) To select the Increase contrast mode, touch press [ P (COUNT The following message will be displayed. Density Shift (Increase contrast) 3 (0 ~ 5) 3 Press any key (from 0 - 5) using the keypad to determine the Density shift. 4 Press [ ].
Page 80: Lens Mode
Basic Operations Lens Mode Automatic Paper Selection (APS) APS detects the size of originals placed on the RADF or platen glass and automatically selects and feeds copy paper of the same size, or selects an appropriate size according to the magnification ratio selected. If the appropriate copy paper is not loaded in any tray, no copying will be performed, and a message will prompt you to load the appropriate paper.
Page 81: Automatic Magnification Selection (Ams)
Basic Operations Lens Mode (continued) Automatic Magnification Selection (AMS) AMS is one of the initial settings that functions when the RADF is used and Copy Size is selected manually. Incompatible: APS, Change magnification, Book Copy, Overlay, Non-Image Area Erase, Repeat, AUTO Layout An appropriate reduction or enlargement ratio will be selected automatically and applied to the image on the copy size.
Page 82: Special Ratio Table
Basic Operations Lens Mode (continued) Special Ratio Table 3.40 2.83 2.43 3.00 2.54 3.20 2.67 2.28 2.81 2.38 3.00 2.50 2.14 2.64 2.23 2.80 2.33 2.00 2.45 2.07 2.60 2.17 1.86 2.27 1.92 2.40 2.00 1.71 2.09 1.77 2.20 1.83 1.57 1.91 1.61...
Page 83: Selecting A Special Ratio For Non-Standard Paper
Basic Operations Lens Mode (continued) Selecting a Special Ratio for Non-Standard Paper To determine reduction or enlargement ratios when using non-standard paper sizes, refer to the Special Ratio Table on the previous page and follow the procedure below. ORIGINAL-COPY WIDTH FIRST, LOCATE THE ORIGINAL WIDTH ON THE HORIZONTAL AXIS.
Page 84: Preset And User Set Ratios
Basic Operations Lens Mode (continued) Preset and User Set Ratios Use the Preset and User Set ratios to increase or decrease magnification in fixed amounts. If required, the eight initially set Preset ratios shown below can be adjusted in the Key Operator mode.
Page 85: Zoom Mode
Basic Operations Lens Mode (continued) Zoom Mode Use the Zoom mode to reduce or enlarge the copied original image in 1% increments. Zoom range: 0.33~4.00 0.33~2.00 in 600 dpi mode 0.33~4.00 in Resolution (very high) Basic Screen with the popup menu for zoom setting 1 Touch on the Basic Screen to display the popup menu for setting the zoom ZOOM...
Page 86: Vertical/Horizontal Zoom
Basic Operations Lens Mode (continued) Vertical/Horizontal Zoom Use the Vertical/Horizontal zoom mode to reduce or enlarge vertical and horizontal dimensions, independently. Vertical/Horizontal zoom range: 0.33~4.00 Basic Screen with the popup menu for zoom setting 1 Touch on the Basic Screen to display the popup menu for setting the zoom ZOOM ratio.
Page 87: Copy Size
Basic Operations Copy Size The tray selection keys below COPY SIZE are used to select a specific paper tray. When a specific tray is selected, the APS key will go out and the AMS key will be highlighted. The copy size may require a ratio adjustment. When using the RADF with Initial settings, a ratio will be selected automatically.
Page 88: Programming Copy Size For Univ. Key
Basic Operations Copy Size (continued) Programming Copy Size for UNIV. Key Basic Screen Universal Tray Size Selection Screen 1 Touch . The Universal Tray Size Selection Screen will be displayed. UNIV 2 Touch the size key. If the correct size is selected, the Basic Screen will be restored automatically. If an incorrect size is selected, the message “Please select correct tray size”...
Page 89: Selecting Paper Type/Size For Multi-Sheet Bypass Tray
Basic Operations Copy Size (continued) Selecting Paper Type/Size for Multi-sheet Bypass Tray 1 Open the Multi-sheet bypass tray, and load the copy paper on the tray. See p. 6-42 ~ p. 6-43 for further details. Basic Screen 2 Touch , then touch BYPASS will be displayed.
Page 90 Basic Operations Copy Size (continued) Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued) Paper Type/Size Selection Screen • When STD size (special) Use arrows to scroll to the desired size. In this case, both the copy size and type selected will be indicated on the Basic Screen. Paper Type/Size Selection Screen •...
Page 91 Basic Operations Copy Size (continued) Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued) Paper Type/Size Selection Screen Paper Type/Size Selection Screen • When Wide size paper Use arrows to scroll to the desired wide size. In this case, both the wide size and type selected will be indicated on the Basic Screen.
Page 92: Reserve
Basic Operations Reserve Set Reserve Job The Reserve function allows you to set up a new job while a current (scan/print) job is in process. When the current job is finished, the Reserve job starts printing immediately. key on the screen is touch sensitive and active only when another job is FREE JOB in progress;...
Page 93 Basic Operations Reserve (continued) Set Reserve Job (continued) key may be used to set the Reserve job only when another job is in FREE JOB progress; otherwise the key appears grayed out. Set the Reserve job as shown below. 1 Touch to display the Reserve Job Setting Screen.
Page 94: Job Status Screen
Displays the No. (01-99) for each job assigned to the machine. MODE: Displays the machine’s current mode of operation. Five modes are listed below. COPIER / RESERVE COPIER / PRINTER / RESERVE PRINTER / CONTROLLER STATUS: Displays the current status of the machine for each job.
Page 95 Basic Operations Reserve (continued) Job Status Screen (continued) TOTAL PAGE(s): Displays the number of scanned pages for each job. (0 to 9999) PAGE(s) LEFT: Displays the remaining copy count of the job. 0 to 9999 (The number exceeding 9999 will be displayed as 9999 .) Copy count = No.
Page 96: Mishandled Paper During The Reserve Setting
Basic Operations Reserve (continued) Mishandled Paper During the Reserve Setting If a misfeed occurs with the print/scan job in progress while you are setting a reserve job, the PRINT/SCAN JOB Basic Screen If originals of the reserve job are already scanned when the misfeed occurs, the reserve job printing can be performed after the jam is cleared and the cleared job is completed.
Page 97: When Paper Is Depleted For The Job In Progress
Basic Operations Reserve (continued) When Paper is Depleted for the Job in Progress If the paper supply for a print job in progress becomes depleted while you are setting a Reserve job, the PRINT JOB Basic Screen In this case, you can still continue the reserve job setting. 1 Touch to display the Basic Screen for the print job.
Page 98: Store Mode
Basic Operations Store Mode Store mode allows you to scan multiple originals by touching the Basic Screen after setting copying conditions, and then outputting the complete set by pressing [ START Platen store mode: scan originals from the platen glass. RADF store mode: scan originals from the RADF.
Page 99 Basic Operations Store Mode (continued) Platen Store Mode (continued) 8 Enter the print quantity, using the keypad. The entered quantity will be displayed on the upper right message area of the Basic Screen. To change the print quantity, press [ To delete the scanned data without printing, press [ popup menu to ensure that you delete the data.
Page 100: Radf Store Mode
Basic Operations Store Mode (continued) RADF Store Mode Use this feature to scan more than 100 original into memory from the RADF. Use this function in conjunction with the Reserve function to increase efficiency of the copying job. Incompatible Basic Copying Conditions: None Incompatible Original Scanning Conditions: Resolution (Very high) Incompatible Applications: Image insert, Book copy Basic Screen...
Page 101: 90 Rotation
Basic Operations Rotation 90 Rotation This function allows you to utilize APS or AMS and copy the original size documents described below onto size 8.5"x11" or 5.5"x8.5", irrespective of the copy paper feeding direction. By default, Rotation requires APS or AMS to function; however, the key operator may set the function to always function or when APS, AMS or reduce functions.
Page 102: 90 Rotation And Ams
Basic Operations Rotation (continued) 90 Rotation and AMS For example, when size 8.5"x11" copy paper is loaded in the tray in landscape orientation and the copier detects that the original is placed in portrait orientation, Rotation (if required) rotates the original image by 90 and the copy is made with the appropriate AMS ratio to fit the portrait style of the copy paper.
Page 103: 180 Rotation
Basic Operations Rotation (continued) 90 Rotation and AMS (continued) When the 5.5"x8.5" tray is selected and the copier detects that the original is placed in portrait orientation, Rotation rotates the original image by 90 and the copy is made with the appropriate AMS ratio to fit the portrait style of the copy paper.
Page 104: To Release Automatic Rotation
Basic Operations Rotation (continued) To Release Automatic Rotation The copier is initially set to activate the Rotation function automatically. To release automatic Rotation: Basic Screen Touch on the Basic Screen to highlight it. The Rotation icon will go out ROTATION OFF and the Rotation function will be canceled.
Page 105: Check Mode And Proof Copy
Basic Operations Check Mode and Proof Copy Use the Check mode to confirm copying selections before pressing the [ Check Screen allows you not only to view the current settings but to change or release them directly from the Check mode. In this mode, use Proof copy to produce a sample of the copied set before copying multiple copies.
Page 106 Basic Operations Check Mode and Proof Copy (continued) 1 Press [ ] on the control panel to display the Check Screen. CHECK 2 Verify the settings made for the current job. 3 If necessary, press [ PROOF COPY Check Screen to output a set of sample copy. If only one copied set is needed and the sample set is adequate, press [ delete the stored data.
Page 107 Basic Operations Check Mode and Proof Copy (continued) 1 Touch the desired copying condition key on the Check Screen to highlight it. The dimmed CHANGE SETTING NOTES: • Any key that cannot be highlighted indicates that the copying condition cannot be changed from the Check Screen.
Page 108: Interrupt Mode
Basic Operations Interrupt Mode Use the Interrupt mode to interrupt copying in progress to perform a simple job. When interrupt copying is completed, the settings for the initial job restore automatically and the Basic Screen displays. Press the [ following conditions: •...
Page 109 Basic Operations Interrupt Mode (continued) 2 Remove any document from the platen glass or from the document feeder, if present. 3 Place new original(s) on the platen glass or in the document feeder. 4 The copying settings in Interrupt mode are as follows. Copy Mode : 1s1 RADF...
Page 110: Help Mode
Basic Operations Help Mode Use the [ ] key to access information about the current screen mode and to learn HELP about setting procedures. The [ Memory and Key Operator Screens. The Help Screen also includes the Help menu icon in the center. When the key is touched, the Help Menu Screen displays a list of all of the copier functions.
Page 111 Basic Operations Help Mode (continued) 1 While in any screen, press [ 2 Touch TONER SUPPLY , or the Service call telephone number and Fax number to display ASSISTANCE specific Help information. 3 For help on operations, touch Menu Screen will be displayed. Select one of the 7 Help menu items. 4 The Weekly timer key display only when the Weekly timer system is activated.
Page 112: Using The Multi-Sheet Bypass Tray
Basic Operations Using the Multi-Sheet Bypass Tray The Multi-sheet bypass tray can be used to stack regular 16 lb~45 lb Bond paper. Bypass tray paper size: 11"x17"~5.5"x8.5" Bypass tray paper weight range: 16 lb~45 lb Bypass tray paper capacity: up to 150 sheets 20 lb Bypass tray Transparency film capacity: 1 sheet 1 Open the Multi-sheet bypass tray located on the right side of the copier.
Page 113 Basic Operations Using the Multi-Sheet Bypass Tray (continued) Load offset tabbed sheets so that the tab extensions are on the right at the rear (not front) of the tray. The top sheet is designated face up as the first tab of the finished set. Subsequent offset tab sheets follow in sequence.
Page 114 Notes...
Page 115 Section 7: Output Modes FS-108/108B Finisher Specifications Non-Sort Mode Using Primary (Main) Tray Sort Mode Using Primary (Main) Tray Staple-Sort Mode Using Primary (Main) Tray Group Mode Using Primary (Main) Tray Output Modes Using Secondary (Sub) Tray Folding, Stapling & Folding and Trimming Modes Cover Sheet Feeder Manual Stapling Output Mode for Machine without Finisher...
Page 116: Section 7: Output Modes
Output Modes FS-108/108B Finisher Specifications Use only paper that is recommended by Konica and stored under the environmental conditions stated for copy quality. Special stock is not guaranteed for reliability or copy quality. Multi-sheet bypass tray, Interrupt, and Transparency interleaving are incompatible with finisher use.
Page 117: Output Modes
Output Modes FS-108/108B Finisher Specifications (continued) Secondary (Sub) Tray • Non-sort and face down exit • Non-sort and face up exit • Group and face down exit • Group and face up exit Paper size: 11"x17"~5.5"x8.5" Paper weight: 16~24 lb Paper capacity for 20 lb: 200 sheets Booklet Tray (FS-108B Finisher only) •...
Page 118 Output Modes FS-108/108B Finisher Specifications (continued) Trimmer Unit (FS-108B Finisher only) • Trimming Mode Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4R (8.27"x11.69", 210mmx297mm) Paper weight: 16~24 lb; Special stock (20 lb paper is recommended) Number of trimmed sheet: 3 sheets max. with Folding mode Trimming width: 10 mm max.
Page 119: Non-Sort Mode Using Primary (Main) Tray
Output Modes Non-Sort Mode Using Primary (Main) Tray The Non-sort mode simply means that the offset-stacker finisher modes are not selected. Copies will be stacked upon exit without being offset by sorted sets. With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FS-108/108B outputs the printed sheets FACE DOWN in the proper order.
Page 120: Sort Mode Using Primary (Main) Tray
Output Modes Sort Mode Using Primary (Main) Tray Use this mode when you want to output multiple copies of the original set, and have each sorted set offset upon exit. The staple mode can be selected with the sort mode. With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FS-108/108B outputs the printed sheets FACE DOWN in the proper order.
Page 121: Staple-Sort Mode Using Primary (Main) Tray
Output Modes Staple-Sort Mode Using Primary (Main) Tray Use this mode when you want to offset and staple each copied set. Stapling position and number of staples (1 or 2) can be designated on the Finisher Mode Selection Screen. Each finished set will be offset from the next copied set. With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FS-108/108B outputs the printed sheets FACE DOWN in the proper order.
Page 122 Output Modes Staple-Sort Mode Using Primary (Main) Tray (continued) 1 Touch on the Basic Screen to highlight it. The Staple Position icon will STAPLE SORT be displayed in the OUTPUT icon area. When not changing the staple position, proceed to step 5. Basic Screen 7-8 Output Modes Finisher Mode Selection Screen...
Page 123 Output Modes Staple-Sort Mode Using Primary (Main) Tray (continued) 2 Touch OUTPUT APPLI. Screen. 3 Touch the desired key among the eight keys on the screen to select the staple position. 4 Touch on the Finisher Mode Selection Screen to complete the setting and return to the Basic Screen.
Page 124: Group Mode Using Primary (Main) Tray
Output Modes Group Mode Using Primary (Main) Tray Use this mode when you want to group together multiple copies of each original, and offset the sets upon exit. Grouped sets cannot be stapled. Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5" (5.5"x8.5"...
Page 125: Output Modes Using Secondary (Sub) Tray
Output Modes Output Modes Using Secondary (Sub) Tray In addition to the Primary (main) tray, FS-108/108B Finisher is equipped with a Secondary (sub) tray that can be selected on the Finisher Mode Selection Screen. The Secondary (sub) tray provides 4 types of output mode as specified below, also to be specified on the Finisher Mode Selection Screen.
Page 126 Output Modes Output Modes Using Secondary (Sub) Tray (continued) Group + Face up 1 Touch OUTPUT APPLI. Screen. 2 Touch to display the popup menu OUTPUT<SUB TRAY>. SUB TRAY 3 Touch the desired key(s) on the popup menu to specify one of the four output modes. To select Non-sort and face down exit, touch To select Non-sort and face up exit, touch To select Group and face down exit, touch...
Page 127: Folding, Stapling & Folding And Trimming Modes
Output Modes Folding, Stapling & Folding and Trimming Modes The Folding and Stapling & Folding modes are available only when the FS-108B Finisher option is installed. The Trimming modes (Folding and Trimming, Stapling & Folding and Trimming) are available only when the TU-108 Trimmer unit option is installed on the FS-108B Finisher.
Page 128 Output Modes Folding, Stapling & Folding and Trimming Modes (continued) Incompatible Special Originals with Booklet selected: Resolution (Very high), Mixed Original, Non STD size Incompatible Applications with Booklet selected: Sheet/Cover Insertion, Combination, Transparency Interleave, Program Job, Non-Image Area Erase, Repeat, Frame/Fold Erasure, AUTO Layout, Shift mode in Image Shift, Overlay Incompatible conditions without Booklet: Sort, Staple-sort, Group, Rotation Sort, Rotation Group, Mixed Original with APS, Transparency Interleave...
Page 129 Output Modes Folding, Stapling & Folding and Trimming Modes (continued) 1 Close the RADF securely, then press [ 2 Touch OUTPUT APPLI. Screen. 3 Touch STAPLING & FOLDING When selecting STAPLING & FOLDING selects automatically. To cancel the trimming mode, touch TRIM When selecting FOLDING...
Page 130: Cover Sheet Feeder
Output Modes Cover Sheet Feeder The Cover Sheet Feeder (PI-108) is available as an option on the FS-108/108B finisher. Load cover sheet paper into this device and use the sheets as front covers for copied sets output to the Main tray; or use the sheets as booklet type covers for copied sets output to the Booklet tray in the Folding or Stapling &...
Page 131 Output Modes Cover Sheet Feeder (continued) 1 Close the RADF securely, then press [ 2 Touch OUTPUT APPLI. Screen. 3 Touch to display the Cover Sheet Insert Selection Screen. COVER SHEET 4 Touch FRONT FRONT+BACK Finisher Mode Selection Screen. 5 Touch on the Finisher Mode Selection Screen.
Page 132: Manual Stapling
Output Modes Manual Stapling The Manual Stapling function is available only with the Cover Sheet Feeder option (PI- 108) installed on the FS-108/108B Finisher. To use this convenient function, simply place a set of paper to be stapled into the cover sheet feeder of the finisher, select the desired staple mode from the manual stapling operation panel located on the top of the finisher, then press the Staple Start/Stop button.
Page 133 Output Modes Manual Stapling (continued) Staple Mode Selection button 1 Place a set of paper to be stapled into the cover sheet feeder, then align the guide plate. The indicator light of Staple Start/Stop button will turn green. NOTE: Refer to the specifications on previous page for available paper size in each mode. 2 Press Staple Mode Selection button to select the desired staple mode.
Page 134: Output Mode For Machine Without Finisher
Output Modes Output Mode for Machine without Finisher This section describes eight output modes for a copier without the Finisher. Face down non-sort exit (default) Face down rotation sort exit Face down group exit Face down rotation group exit Face down non-sort (default) Face up non-sort...
Page 135: Face Down Exit
Output Modes Output Mode for Machine without Finisher (continued) Face Down Exit • Non-sort mode copies the original set in amounts determined by the print quantity setting, then outputs sorted sets normally. • Rotation sort mode rotates every other sorted sets by 90 upon exit, provided the same paper size is loaded in two trays, one tray with paper loaded in portrait orientation and the other tray with paper loaded in landscape orientation.
Page 136 Output Modes Output Mode for Machine without Finisher (continued) Face Down Exit (continued) Basic Screen To Set Face Down Rotation Sort Exit 1 Confirm that the OUTPUT APPLI. is highlighted, touch OUTPUT APPLI. Screen. Select to highlight 2 Touch to highlight it. SORT Basic Screen To Set Face Down Group Exit...
Page 137 Output Modes Output Mode for Machine without Finisher (continued) Face Down Exit (continued) Basic Screen To Set Face Down Rotation Group Exit 1 Touch OUTPUT APPLI. 2 Touch ROTATION GROUP 3 Touch to complete the setting and return to the Basic Screen. Output Menu Screen on the Basic Screen to display the Output Menu Screen.
Page 138: Face Up Exit
Output Modes Output Mode for Machine without Finisher (continued) Face Up Exit Unless Face Up Exit is selected, all simplex copies and odd numbered duplex copies exit to the tray face down. When Face Up Exit is selected, all simplex copies and odd numbered duplex copies exit face up.
Page 139 Output Modes Output Mode for Machine without Finisher (continued) Face Up Exit (continued) Basic Screen To Set Face Up Rotation Sort Exit 1 Touch OUTPUT APPLI. 2 Touch to highlight it. FACE UP 3 Touch to complete the setting and return to the Basic Screen. 4 Touch to highlight it.
Page 140 Output Modes Output Mode for Machine without Finisher (continued) Face Up Exit (continued) Basic Screen To Set Face Up Rotation Group Exit 1 Touch OUTPUT APPLI. 2 Touch ROTATION GROUP 3 Touch to complete the setting and return to the Basic Screen. 7-26 Output Modes Output Menu Screen to display the Output Menu Screen.
Page 141 Section 8: Special Original Special Original Screen Resolution (Image Quality) High Mode Very High Mode 600 Dpi Text/Photo Enhance Special Original Mixed Original Z-Folded Original SDF (Single Document Feed) Original Form Special Original 8-1...
Page 142: Section 8: Special Original
Special Original Special Original Screen When on the Basic Screen is touched, the Special Original Screen SPECIAL ORIGINAL will be displayed. If one function on the menu is incompatible with another, it will appear dimmed. The function keys initially selected for each of four sections are highlighted. Touch and highlight the desired key to change the standard setting.
Page 143: Resolution (Image Quality)
Special Original Resolution (Image Quality) Image quality in the normal default mode (400 dpi) is adequate for most copying needs. Special modes are available for jobs that require enhanced image quality, as for complex text or graphic images, or high quality photos, etc. High Mode High mode sharpens the image more than the normal mode, but uses more memory than the normal default mode.
Page 144: Very High Mode
Special Original Resolution (Image Quality) (continued) Very High Mode Very High mode is used for high quality photo output. Incompatible Basic Copying Conditions: Using RADF, Sort, Staple-Sort, 1-2, 2-2, RADF Store Mode, Reserve, Proof Copy Incompatible Special Originals: Mixed Original, Z-Folded Original Incompatible Applications: Sheet/Cover insertion, Chapter, Combination, Booklet, Image insert, Repeat, Overlay NOTE: When using Program job function, selecting High or Very High mode in one JOB will be incompatible...
Page 145: 600 Dpi
Special Original Resolution (Image Quality) (continued) 600 Dpi Select 600 dpi mode to improve the resolution. This mode uses more memory than the normal default mode or the High mode. Incompatible Copying Conditions: None NOTE: When using Program job function, selecting High or Very High mode in one JOB will be incompatible with 600dpi in another JOB.
Page 146: Text/Photo Enhance
Special Original Text/Photo Enhance Use this function to enhance the reproducibility of half tone and give an image closer to that of the original. Text Mode Use the Text mode when copying the text original. In this mode, text is improved in comparison to using the general mode.
Page 147: Special Original
Special Original Text/Photo Enhance (continued) Original Auto mode Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation...
Page 148: Mixed Original
Special Original Special Original Mixed Original Use the Mixed original mode with the document feeder or with Store mode to copy ledger (11"x17"), legal (8.5"x14"), letter (8.5"x11") and 5.5"x8.5"*, or legal (8.5"x14"), letter/R (8.5"x11"R and 8.5"x11") and 5.5"x8.5"* originals. Each original in the mixed set will be copied to paper of the same size (APS mode) or to paper of desired size with appropriate ratio automatically selected (AMS mode).
Page 149 Special Original Special Original (continued) Mixed Original (continued) 1 Touch SPECIAL ORIGINAL 2 Touch Mixed Original 3 Select additional copying features, as desired. 4 Touch to complete the setting and to return to the Basic Screen. 5 Select APS mode to copy each original size to a matching copy size in 1:1 mode; or select AMS mode to copy all originals to the same paper size, with a ratio selected automatically.
Page 150: Z-Folded Original
Special Original Special Original (continued) Z-Folded Original Use the Z-folded original mode with the document feeder to copy Z-folded originals so as not to cause paper misfeed. Use RADF. RADF capacity: Max. 100 sheets Incompatible Basic Copying Conditions: Using platen glass Incompatible Special Original: Resolution (Very high), Mixed Original, SDF, Tab Paper Incompatible Applications: Non-image area erase, Repeat, AUTO layout Special Original Screen...
Page 151: Sdf (Single Document Feed)
Special Original Special Original (continued) SDF (Single Document Feed) Use the SDF mode to copy thick originals to be fed one sheet at a time in the document feeder. Use RADF. RADF capacity: 1 sheet at a time Key operator can set the machine to automatically feed the original one second after placing the original in the document feeder (Auto Start), when the SDF mode is used together with Store mode.
Page 152: Original Form
Special Original Original Form The copier usually detects the standard size of originals fed through RADF or positioned on the platen glass (STD size mode). Use Non STD size mode to specify the scanning area manually for copying or printing special size originals.
Page 153 Section 9 : Applications Application Function Menu Sheet/Cover Insertion Chapter Combination Booklet Transparency Interleave Image Insert Book Copy Program Job Non-Image Area Erase Reverse Image Repeat Image Frame/Fold Erasure AUTO Layout All-Image Area Image Shift Stamp/Overlay Applications 9-1...
Page 154: Section 9: Applications
Applications Application Function Menu When key on the Basic Screen is touched, the Application Selection Screen APPLI. displays on the touch panel. If one function on the menu is incompatible with another, it will appear dimmed. The function always dimmed on the screen is now under development.
Page 155: Sheet/Cover Insertion
Applications Sheet/Cover Insertion Use Sheet/Cover Insertion in copy mode or blank mode to insert chapter sheets or separator sheets into the finished set, as well as front and back covers. Specifications for Sheet/Cover Insertion Scan and store originals into memory, then print all the pages collectively. Max.
Page 156 Applications Sheet/Cover Insertion (continued) Insertion Mode This mode is classified as Copy insertion and Blank insertion. The Copy insertion mode copies and inserts plain or colored sheets at locations designated in the page setting area of the Sheet/Cover Insertion Screen. The Blank insertion mode inserts non copied (plain or colored) sheets.
Page 157: Basic Functions
Applications Sheet/Cover Insertion (continued) Basic Functions 9 10 SURVEYOR’S REPORT Originals FRONT COVER COPIED 9 10 SURVEYOR’S REPORT Originals FRONT COVER BLANK 9 10 SURVEYOR’S REPORT Originals BACK COVER COPIED 9 10 SURVEYOR’S REPORT Originals BACK COVER BLANK 9 10 SURVEYOR’S REPORT Originals...
Page 158 Applications Sheet/Cover Insertion (continued) Application Selection Screen Sheet/Cover Insertion Screen (with FRONT COPY, BACK BLANK and COPY INSERT selected) Max. insertion locations: 30 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch Sheet/Cover Insertion 3 Select Front Cover Insertion, if desired.
Page 159 Applications Sheet/Cover Insertion (continued) 6 The page setting area of the Sheet/Cover Insertion Screen displays 15 keys to designate each insertion location. The first (upper left) key displays the Front Cover icon if selected. The Back Cover icon appears, if selected, as the last (fixed) key, with one active blank key preceding it.
Page 160 Applications Chapter Chapter is used with RADF in 1-2 or 2-2 mode for the purpose of locating title pages on the right side, rather than reverse side, of a duplex copy. To effectively locate the title page on the right, a blank sheet will be automatically created on the reverse side of a sheet, if required.
Page 161 Applications Chapter (continued) 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch . The Chapter Insertion Setting No. Screen will be displayed. The 1-2 Chapter copy mode is automatically selected. 3 Use the keypad on the control panel to enter the page number of each title page. 4 Touch To clear an incorrect entry, touch location will be deleted.
Page 162: Combination
Applications Combination Use this function to lay out and copy a fixed number (2, 4, or 8) of pages onto one sheet of copy paper (2 in 1, 4 in 1, or 8 in 1). Combination Specifications Scan and store originals into memory. Use RADF.
Page 163 Applications Combination (continued) 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch to display the Combination Mode Selection Screen. Combination 3 Touch , or 2 in 1 4 in 1 the previous page. 4 Touch to return to the Application Selection Screen.
Page 164: Booklet
Applications Booklet Use the Booklet to make a multiple page signature booklet on both sides of ledger, legal, or 8.5"x11"R paper from any tray unless it is specified as Thick 2 or TAB of the paper type in the Key operator mode. Original images are scanned into memory and automatically arranged in booklet format in correct order.
Page 165 Applications Booklet (continued) 1 Load 11"x17" or 8.5"x11"R copy paper in a tray. When selecting cover sheet mode COVER WITH COPY SHEET in any other tray unless it is specified as Thick 2 or TAB of the paper type in the Key operator mode.
Page 166 Applications Booklet (continued) Output Menu Screen (2) Touch on the Output Menu Screen. The Basic Screen will be restored with the highlighted. OUTPUT APPLI. 11 Enter the desired print quantity. 12 Position letter-size originals FACE UP in portrait orientation ( feeder.
Page 167: Transparency Interleave
Applications Transparency Interleave Use the Transparency interleave function in 1-1 or 2-1 mode to copy onto overhead projection transparencies, and output a blank or copied interleaf sheet with each copied transparency. In the blank mode, a blank interleaf sheet is output with each transparency to keep the film material from sticking together.
Page 168 Applications Transparency Interleave (continued) Application Selection Screen 1 Load copy paper in tray 1, 2, 3, or 4 to match the size of transparencies. 2 Open the Multi-sheet bypass tray. Insert one transparency at a time into the Multi- sheet bypass tray, and adjust the paper guides. IMPORTANT: DO NOT LOAD TRANSPARENCIES INTO ANY OTHER TRAY.
Page 169: Image Insert
Applications Image Insert Use the Image insert mode to combine images scanned from the platen glass, such as photos, paste-ups, newspaper articles, graphs, etc., with images scanned from the document feeder. Then, output the combined images as a finished set. The selected copy paper size is determined by the size of originals loaded in the document feeder.
Page 170 Applications Image Insert (continued) 1 Review pages to be scanned from the document feeder, and note the page number locations for inserting images scanned from the platen glass. To insert more than one sheet at the same location, enter the page number repeatedly. For example, if insertion locations are [2/2/6], scanned platen images will be inserted as follows: •...
Page 171: Book Copy
Applications Book Copy Use this function to copy an open book or a ledger sheet onto two 8.5"x11" sheets in 1-1 mode, or onto the front and back sides of one 8.5"x11" sheet in 1-2 mode. If you select another copy size, image division will perform incorrectly. The following three modes can be selected from the Book Copy Screen.
Page 172 Applications Book Copy (continued) 1 Load 8.5"x11" sheets in a tray or in the Multi-sheet bypass tray. 2 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 3 Touch to enter the Book Copy Screen. AUTO layout and Non-image area Book Copy erase will be automatically selected.
Page 173: Program Job
Applications Program Job In the ordinary Store mode, the combined features selected for the job are applied to all originals to be scanned. In the Program Job mode, you may scan multiple sets of originals and apply different settings on each set (referred to as JOB), then output them all as a complete set.
Page 174 Applications Program Job (continued) Application Selection Screen 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch . The incompatible function keys will be dimmed to show Program Job inactivity. 3 Select additional copying features, as desired. 4 Touch to complete the setting and return to the Basic Screen.
Page 175: Non-Image Area Erase
Applications Non-Image Area Erase The Non-image area erase mode is used to copy non standard or special originals, such as books, magazines, paste-ups, graphs, thin or thick materials, etc. from the platen glass. The exposed glass area outside the borders of the original will not be copied. This mode helps to preserve the condition of originals;...
Page 176 Applications Non-Image Area Erase (continued) Application Selection Screen 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch Non-image Area Erase 3 Select additional copying features, as desired. 4 Touch to complete the setting and return to the Basic Screen. 5 Enter print quantity.
Page 177: Reverse Image
Applications Reverse Image Use Reverse image to reverse the image from black-on-white to white-on-black, and vice versa. Original/Copy paper: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5" Incompatible Basic Copying Conditions: Folding, Stapling & Folding, Trimming Incompatible Special Originals: None Incompatible Applications: Non-Image Area Erase, Repeat, All-Image Area Application Selection Screen 1 Touch on the Basic Screen to display the Application Selection Screen.
Page 178: Repeat Image
Applications Repeat Image Use Repeat image to create labels, business cards, tickets, etc., by repeating the selected image down the page. Vertical/Horizontal Width Setting mode Repeat the selected image area of 10mm ~ 150mm in both vertical and horizontal widths measured from the rear right corner of the 11"x17"...
Page 179 Applications Repeat Image (continued) Incompatible Conditions with Repeat Mode Basic copying conditions: Rotation, APS, AMS, Change magnification, Group, Rotation Sort, Rotation Group Special Originals: Resolution (Very high), Mixed Original, Z-folded Original Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleave, Image Insert, Book Copy, Non-image Area Erase, Reverse Image, Frame/Fold Erasure, AUTO Layout, Image Shift with 4/8 Repeat, Overlay NOTE: The Auto Detection and Repeat mode of the Repeat image function may not operate properly if the lighting in the work place is directly over the platen glass.
Page 180 Applications Repeat Image (continued) 3 To select the Vertical/Horizontal width setting mode: (1) Touch Vertical/Horizontal (2) Specify the vertical and horizontal widths of the scanning area using up/down arrow key, from 10~150 mm in 1 mm increments. Keep touching the key to increase/decrease the value continuously.
Page 181: Frame/Fold Erasure
Applications Frame/Fold Erasure Use Frame/Fold Erasure to eliminate black copy marks along borders. Frame erasure amount: 1~15 mm in 1 mm increments Initial frame erasure value: 10 mm Fold erasure amount: 1~30 mm in 1 mm increments Initial fold erasure value: 10 mm Original/copy paper size: 11"x17", 8.5"x14", 8.5"x11"...
Page 182 Applications Frame/Fold Erasure (continued) 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch Frame/Fold Erasure 3 Touch Frame Erasure (All sides) use the Fold erasure mode. • Touch Frame Erasure (All sides) right and left sides collectively using the touch screen keypad or up/down arrow key, from 1~15mm.
Page 183: Auto Layout
Applications AUTO Layout Use this function to detect the image area of the original and center the whole image on the copy paper. Copy mode is automatically set to 1-1; 1-2 mode is also available only when using Store mode. APS and AMS are automatically released.
Page 184 Applications AUTO Layout (continued) 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch . The incompatible function keys will be dimmed to show inactivity. AUTO Layout 3 Select additional copying features, as desired. When using RADF to scan originals, touch Non-image Area Erase 4 Touch...
Page 185: All-Image Area
Applications All-Image Area Use this function to make copies printed completely to the edges. Copies will be made without image cutoff on the edges. Incompatible Basic Copying Conditions: Rotation Sort Incompatible Special Originals: None Incompatible Applications: Non-Image Area Erase, Reverse Image, Frame/Fold Erasure Application Selection Screen 1 Touch on the Basic Screen to display the Application Selection Screen.
Page 186: Image Shift
Applications Image Shift Use Image Shift to create a new binding margin on originals copied in the 1-1 or 2-2 mode, or adjust existing margins on originals copied in the 1-2 or 2-1 mode. If image loss is likely, select the Reduce & Shift mode instead of regular Image shift. Page space function is available only when Booklet or 2 Repeat mode of Repeat has been already selected.
Page 187 Applications Image Shift (continued) Image Shift Selection Screen (Image Shift mode) 1-1 mode Originals 1-2 mode Originals Image Shift Selection Screen (Reduece & Shift mode) Image Shift Selection Screen (PAGE SPACE selected) Copies Copies 2-1 mode Copies Originals 2-2 mode Originals Copies Applications 9-35...
Page 188 Applications Image Shift (continued) 1 Select the copy mode and copy size from the Basic Screen, as required. 2 Touch on the Basic Screen to enter the Application Selection Screen. APPLI. 3 Touch to display the Image Shift Selection Screen. Image Shift 4 Touch Image Shift...
Page 189 Applications Image Shift (continued) 7 When Booklet or 2 Repeat mode of Repeat has been already selected, the key appears clear on the screen to show its availability, with PAGE SPACE SPACE indication displayed in the image area. If desired, touch PAGE SPACE touch screen keypad or up/down arrow key.
Page 190: Stamp/Overlay
Applications Stamp/Overlay Stamp allows you to print regular stamp, numbering, page numbering, date and time, watermark, and watermark numbering onto the output copies. These 6 types of stamps can be used individually or in multiple combinations. • STAMP prints the letters selected from 8 options onto the scanned image at the location designated on the screen.
Page 191 Applications Stamp/Overlay (continued) Overlay Specifications Scan and store originals into memory. APS and AMS are automatically released. Magnification is initially set to 1:1. This setting is changeable. Original/Copy size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5" Incompatible Basic Copying Conditions: None Incompatible Special Originals: Resolution (Very high), Mixed Original, SDF Incompatible Applications: Sheet/Cover Insertion, Combination, Transparency Interleave, Image Insert, Book Copy, Program Job, Repeat, AUTO Layout, Reduce &...
Page 192 Applications Stamp/Overlay (continued) Application Selection Screen (Overlay selected) Stamp Selection Screen Page Numbering Type Selection Screen Watermark Selection Screen 1 Touch on the Basic Screen to display the Application Selection Screen. APPLI. 2 Touch . The Stamp/Overlay Selection Screen will be displayed. Stamp/Overlay 3 Touch to select the desired stamp to display the subsequent screen.
Page 193 Applications Stamp/Overlay (continued) 4 When selecting STAMP, SET NUMBERING, PAGE NUMBERING, or DATE/TIME, select the desired position from 9 location keys on each screen. If fine adjustment is required, touch Adjustment Setting Screen. Touch UP SIDE DOWN SIDE use the touch screen keypad or up/down arrow key to enter the desired amount. Fine Adjustment Setting Screen 5 Touch CHARACTER SIZE...
Page 194 Applications Stamp/Overlay (continued) 7 Touch on the Set Numbering, Page Numbering, or Watermark STARTING No. Numbering Type Selection Screen to display the Starting No. Setting Screen. Use the touch screen keypad or up/down arrow key to enter the desired starting number, then touch to return to the previous screen.
Page 195: Job Store
Section 10: Job Memory Job Store Job Recall Job Memory Form Job Memory 10-1...
Page 196: Section 10: Job Memory
Job Memory Job Store Use Job Store to store up to 30 frequently-used copying jobs, which can be recalled at any time. The stored jobs can be given alphabetical names. All copying functions can be selected Control Panel CHECK HELP JOB MEMORY AUTO RESET Job Store Check Screen...
Page 197 Job Memory Job Store (continued) 1 Make job selections from the Basic Screen, Application Selection Screen, Special Original Screen and/or Output Selection Screen. 2 When all selections are made, press [ the Job No. Selection Screen. 3 Touch . The Job Store Check Screen displays to enable you to review the STORE settings.
Page 198: Job Recall
Job Memory Job Recall Use Job Recall to recall jobs that are already stored in Job Memory. Job No. Selection Screen Job No. Selection Screen (Job Recall) Job Recall Check Screen 10-4 Job Memory...
Page 199 Job Memory Job Recall (continued) 1 Place original(s) as required for the job you are about to recall. 2 Press [ ] to display the Job No. Selection Screen. JOB MEMORY (See sample screen, previous page.) 3 Touch a Job No. key to select a job you want to recall, and to highlight the key. If required, scroll with the arrow keys to reach the desired Job No.
Page 200: Job Memory Form
Job Memory Job Memory Form Make a copy of this form to record frequently-used copy jobs stored in Job Memory. Update the information when changes are made. Make additional copies, as needed. JOB NUMBER/NAME 10-6 Job Memory JOB DESCRIPTION...
Page 201 Job Memory Job Memory Form (continued) JOB NUMBER/NAME JOB DESCRIPTION Job Memory 10-7...
Page 202 Notes...
Page 203: Section 11: Server Function
Section 11: Server Function Server Function Image Store/Delete Mode To Store Image Data in HDD To Delete Image Data Image Store & Output Mode Image Recall Mode Server Function 11-1...
Page 204: Server Function
Server Function Server Function Use Server function to accumulate scanned images into built-in DIMM (memory), then store the image data in HDD* (option) so that the data can be recalled to DIMM, and then output as needed. This function also allows storing the image data in normal copying procedure.
Page 205 Server Function Server Function (continued) The Server function provides the following three modes: q Image Store/Delete mode Store the image data scanned from originals in HDD, or delete the data stored in HDD. Image Data Store/Delete Site Selection Screen w Image Store & Output mode Store the scanned image data in HDD after copying is completed.
Page 206: Image Store/Delete Mode
Transparency Interleave, Image Insert, Book Copy, Program Job (available in Image Store & Output Mode only), Non-Image Area Erase, Reverse Image, Repeat, AUTO Layout, Image Shift, Stamp/Overlay Scanner/Server Setting Menu Screen Control Panel COPY SCANNER / SERVER PRINTER CHECK HELP JOB MEMORY AUTO RESET 11-4 Server Function...
Page 207 Server Function Image Store/Delete Mode (continued) To Store Image Data in HDD (continued) Image Data Store/Delete Site Selection Screen Job Name Entry Screen 1 Press [ ] to light up the [ MODE Menu Screen will be displayed. 2 Touch IMAGE STORE/DELETE Screen.
Page 208: To Delete Image Data
Server Function Image Store/Delete Mode (continued) To Store Image Data in HDD (continued) Image Data Storing Screen (Scanner to HDD) 9 Press [ ] to scan original(s). START When scanning is completed, the Image Data Storing Screen will be displayed. When store mode is used, touch to deselect after all originals are scanned.
Page 209 Server Function Image Store/Delete Mode (continued) To Delete Image Data (continued) 1 Press [ ] to light up the [ MODE Menu Screen will be displayed. 2 Touch IMAGE STORE/DELETE 3 Touch SCANNER HDD Entry Screen will be displayed. 4 Enter your Image data password from the touch screen keypad. To correct an entry, touch then enter the correct password.
Page 210: Image Store & Output Mode
Server Function Image Store & Output Mode Use this function to store the scanned image data in HDD after copying is completed. This storing function does not conflict with any other copying conditions. NOTE: Installation of the optional HDD (HD-102) is required for this function. With the HDD installed, the HDD STORE key will be displayed on the Output Menu Screen.
Page 211 Server Function Image Store & Output Mode (continued) Image Data Storing Screen 8 Press [ ] to scan and then print. START When the Store mode is used, touch mode when the store function is completed, i.e., after all originals are scanned, then press [ ] to print.
Page 212: Image Recall Mode
Server Function Image Recall Mode Use this function to recall the image data stored in HDD to built-in DIMM for printing. NOTE: Installation of the optional HDD (HD-102) is required to recall data from the HDD. To recall data stored in the HDD, enter the password specified at the time data was stored, then designate it by the job name.
Page 213 Server Function Image Recall Mode (continued) 1 Press [ ] to light up the [ MODE Menu Screen will be displayed. 2 Touch IMAGE RECALL 3 Touch to recall the data stored in HDD. The Image Data Password Entry Screen will be displayed.
Page 214 Notes...
Page 215 Section 12: Shortcuts Set Reserve Job Store Originals Scanned from Platen Store Originals Scanned from RADF Stapling & Folding, Folding, and Trimming Mixed Original Sheet/Cover Insertion Chapter Combination Booklet Transparency Interleave Image Insert Book Copy Program Job Non-Image Area Erase Reverse Image Repeat Image Frame/Fold Erasure...
Page 216: Section 12: Shortcuts
Shortcuts Set Reserve Job (p. 6-22) 1 Touch to display the Reserve job setting screen while a current job is in FREE JOB progress. 2 Select copying conditions for the reserve job. Wait for the current job to complete its scanning operation, if necessary.
Page 217: Stapling & Folding, Folding, And Trimming
Shortcuts Stapling & Folding, Folding, and Trimming 1 Close the RADF (document feeder cover), then press [ AUTO RESET ] to reset the machine. 2 Touch OUTPUT APPLI. 3 Touch STAPLING & FOLDING mode automatically selected; or touch Touch to select/deselect the Trimming mode, as desired. TRIM 4 Touch to display the Basic screen.
Page 218: Combination
Shortcuts Chapter (p. 9-8) 1 Touch to display the Application selection screen. APPLI. 2 Touch to display the Chapter page setting screen with 1-2 mode Chapter automatically selected. 3 Use the keypad to enter the page number of the first title page, then touch 4 Repeat Step 3 for each additional title page, touching 5 Touch to return to the Application selection screen.
Page 219: Transparency Interleave
Shortcuts Transparency Interleave 1 First, load the same size copy paper as the transparencies in any regular tray. 2 Insert one transparency sheet at a time into the Multi-sheet bypass tray. 3 Touch to display the Application selection screen. APPLI. 4 Touch Transparency Interleave 5 Touch...
Page 220: Book Copy
Shortcuts Book Copy (p. 9-19) 1 First, load letter sheets in a regular tray or in the Multi-sheet bypass tray. 2 Touch to display the Application selection screen. APPLI. 3 Touch to display the Book copy screen with AUTO layout and Non-image Book Copy area erase selected.
Page 221: Reverse Image
Shortcuts Reverse Image (p. 9-25) 1 Touch to display the Application selection screen. APPLI. 2 Touch Reverse Image black copying. 3 Make additional copying selections. 4 Touch OK to return to the Basic screen. 5 Enter the print quantity amount. 6 Position original(s) face up on the RADF (document feeder) tray or face down on the platen glass.
Page 222: Auto Layout
Shortcuts AUTO Layout (p. 9-31) 1 Touch to display the Application selection screen. APPLI. 2 Touch to center the original image on the copy paper. AUTO Layout 3 Make additional copying selections, or touch 4 Select copy size and enter the print quantity amount. 5 Position original face up in the document feeder or face down on the platen glass without skewing it.
Page 223: Stamp/Overlay
Shortcuts Stamp/ Overlay (p. 9-38) 1 Touch to display the Application selection screen. APPLI. 2 Touch Stamp/Overlay 3 Touch the desired stamp ( , and WATERMARK WATERMARK NUMBERING On each screen, you can specify the desired stamp type of the selected stamp. 4 Specify the desired position, size, etc., according to the options provided on each screen, then touch 5 The Overlay function will be selected simply by touching...
Page 224: Loading Paper
Shortcuts Loading Paper (p. 14-2) Main Body User-Adjustable Trays: Tray 1 (500), Tray 2 (500), and Tray 3 (1,000) 1 Withdraw the main body tray, then place paper into the tray with the curl turning up. Load size 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R or 5.5"x8.5" (portrait). Do not stack paper above the level of the red line.
Page 225 Section 13 : Key Operator Mode How to Access the Key Operator Mode User Density Level 1 Setting [1] User Density Level 2 Setting [2] User Lens Mode Ratio Setting [3] ECM (Electronic Copy Monitor) Function Setting [4] How to Access the ECM Setting Mode Lock / Delete Job Memory [5] Paper Type / Special Size Set [6] Panel Contrast / Key Sound Adjustment [7]...
Page 226: Section 13: Key Operator Mode
Key Operator Mode To the Key Operator The key operator is trained to handle all special key operator functions that are not accessible to the general user, such as monitoring overall copier activity, machine performance, and service information; modifying machine settings; and controlling user activity, for billing purposes.
Page 227: How To Access The Key Operator Mode
Key Operator Mode To the Key Operator (continued) How to Access the Key Operator Mode 1 Press the [ ] button on the Control panel to display the Help Screen. HELP 2 Then, touch the Key Operator Mode The Key Operator Password Entry Screen displays when the 4-digit key operator password is set by service.
Page 228: Function Menu Map
Key Operator Mode Function Menu Map FUNCTION MENU [1] System initial setting [2] Copier initial setting [3] User setting mode [4] E.C.M. Function setting [5] Lock/delete job memory [6] Paper type / Special Size Set [7] Panel contrast / Key Sound Adj. [8] Key operator data setting [9] Weekly timer...
Page 229: Key Operator Mode
[36] E.C.M. password input timing [37] Key click sound (No paper/JAM) [38] Reserve copy function [39] Scan stop by a pull out tray [40] Change page no. pos. (booklet) [41] Trimmer (STD/Non STD size) [42] Timer which prohibits Printer Key Operator Mode 13-5...
Page 230 Key Operator Mode Function Menu Map (continued) FUNCTION MENU [14] Machine management list print [15] Call remote center [16] Side 2 lens adjustment [17] Finisher adjustment [18] HDD management setting [1] Password list/delete 13-6 Key Operator Mode SUB FUNCTION MENU AND SETTING OPTIONS [1] Job memory list [2] User management list [3] E.C.M.
Page 231: System Initial Setting [1]
Key Operator Mode System Initial Setting [1] Set the following initial conditions of the copier. • Date & Time setting: Current date and time, summer time • Language select setting: Language used in LCD (English) • IP address setting: IP address to be accessed from PC Date &...
Page 232: Language Select Setting [2]
Key Operator Mode System Initial Setting [1] (continued) Language Select Setting [2] Select the language used in the LCD (English). Default setting: English System Initial Setting Menu Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen.
Page 233: Ip Address Setting [3]
Key Operator Mode System Initial Setting [1] (continued) IP Address Setting [3] When using the Job Editor function, this setting is required to enable a PC to gain access to this machine. NOTE: Ask your network manager to perform this setting. Incorrect setting may cause a trouble in other network systems.
Page 234: Copier Initial Setting [2]
Key Operator Mode Copier Initial Setting [2] Initial settings are the settings that display automatically when the copier is powered on, when Auto/Reset timer is operated, or when [ settings can be changed by the key operator, as shown in this section. Initially, i.e., at installation, the Basic Screen displays the following condition to meet Energy Star requirements: Initial Setting...
Page 235 Key Operator Mode Copier Initial Setting [2] (continued) Key Operator Mode Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen. NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password. 2 Touch [2] Copier initial setting 3 Make a selection for each mode as initial settings.
Page 236: User Setting Mode [3]
Key Operator Mode User Setting Mode [3] Set two userset density levels and three USERSETs of magnification. User Density Level 1 Setting [1] Output copying samples from 16 density levels from Lighter to Normal or Normal to Darker, then select the desired exposure and program it as USER 1. The programmed copy density can be recalled by selecting USER 1 on the Basic Screen.
Page 237: User Density Level 2 Setting [2]
Key Operator Mode User Setting Mode [3] (continued) User Density Level 2 Setting [2] Output copying samples from 16 density levels from Lighter to Normal or Normal to Darker, then select the desired exposure and program it as USER 2. The programmed copy density can be recalled by selecting USER 2 on the Basic Screen.
Page 238: User Lens Mode Ratio Setting [3]
Key Operator Mode User Setting Mode [3] (continued) User Lens Mode Ratio Setting [3] The preset and userset ratios available on the Basic Screen are used to reduce and enlarge the original image to accommodate copy paper size. Normally, users are allowed to change the three User Lens Mode Ratio Setting Screen.
Page 239: Ecm (Electronic Copy Monitor) Function Setting [4]
Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] This function can only be accessed by the key operator after a 8-digit ECM master key code is entered. The Electronic Copy Monitor allows you to monitor all copying activity by controlling ECM password accounts.
Page 240: How To Access The Ecm Setting Mode
Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) How to Access the ECM Setting Mode Key Operator Mode Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen.
Page 241: Data Edit [1]
Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] Use this setting to display the list of copy count and copy limit for each account, to change, add, or delete the ECM data, and to reset the copy count of the individual account.
Page 242 Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] (continued) 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen. (See note 1.) 2 Touch [4] E.C.M.
Page 243 Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] (continued) To Add ECM Data: (1) Touch on the ECM Data Edit Screen. The ECM Data Add Screen will be displayed. (2) Touch the desired item key to highlight it, then enter the data by using the touch screen keypad.
Page 244 Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] (continued) 5 If other ECM setting changes are required, touch Data Edit Screen to return to the ECM Setting Menu Screen. Touch desired key, from [1]~[3].
Page 245: All Count Reset [2]
Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. All Count Reset [2] Reset the count for all ECM accounts. ECM Setting Menu Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen.
Page 246: Function Setting [3]
Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Function Setting [3] Use this function to turn ECM On or Off; or to select whether the copier will stop at the time the count limit is reached, or after the current copy job is completed. ECM Setting Menu Screen 1 Press [ ] to display the Help Screen, then touch...
Page 247: Lock/Delete Job Memory [5]
Key Operator Mode Lock/Delete Job Memory [5] Use this function to lock/unlock or delete a Job that has been programmed. A locked Job is indicated by a lock icon ( The settings of a locked job cannot be changed. Setting options: Lock Job memory; Unlock Job memory; Delete Job memory Lock/delete is available for all 30 stored jobs A blank key indicates that no job is programmed Key Operator Mode Screen...
Page 248: Paper Type / Special Size Set [6]
Key Operator Mode Paper Type / Special Size Set [6] Use this function to indicate a specific paper type or to specify a special paper size for each tray key on the Basic Screen. This is especially useful when special paper is used on a regular basis and is always placed in a specific paper tray.
Page 249 Key Operator Mode Paper Type / Special Size Set [6] (continued) 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen. (See note.) 2 Touch [6] Paper type / Special size set To specify paper type;...
Page 250: Panel Contrast / Key Sound Adjustment [7]
Key Operator Mode Panel Contrast / Key Sound Adjustment [7] Use this feature to adjust the level of brightness of the touch screen portion of the control panel, and also the volume of the touch key. Key Operator Mode Screen 1 Press [ ] to display the Help Screen, then touch HELP...
Page 251: Key Operator Data Setting [8]
Key Operator Mode Key Operator Data Setting [8] Use this screen to enter the name and extension number of the key operator indicated on the Help Screen developed from the Basic Screen. Setting options: 5-digit key operator telephone extension; Max. 8-character key operator name Key Operator Mode Screen 1 Press [ ] to display the Help Screen, then touch...
Page 252: Weekly Timer [9]
Key Operator Mode Weekly Timer [9] This function can be accessed only by the key operator after a unique 4-digit Weekly timer master key code is entered. The Weekly Timer is a copier management function that shuts down power to the machine on a daily or hourly basis, and can be programmed specifically for lunch breaks, weekends and holidays, or any time the copier is not required.
Page 253: How To Access The Weekly Timer Setting Mode
Key Operator Mode Weekly Timer [9] (continued) How to Access the Weekly Timer Setting Mode Key Operator Mode Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen. (See note 1.) 2 Touch [9] Weekly timer The Weekly Timer Master Key Code Screen displays, if a code is required.
Page 254: Weekly Timer On/Off Setting [1]
Key Operator Mode Weekly Timer [9] (continued) Weekly Timer On/Off Setting [1] Weekly Timer Setting Menu Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen. (See note 1.) 2 Touch [9] Weekly timer to display the Weekly Timer Setting Menu Screen.
Page 255: Timer Setting [2]
Key Operator Mode Weekly Timer [9] (continued) Timer Setting [2] Use this function to set the On/Off times in hours and minutes for each day of the week or set the collective time for the entire week, i.e., the same On/Off time for each day. Weekly Timer Setting Menu Screen 1 Press [ ] to display the Help Screen, then touch...
Page 256 Key Operator Mode Weekly Timer [9] (continued) Timer Setting [2] (continued) 5 To set the ON/OFF time collectively for more than one day of the week, touch Collectively timer setting Screen. 6 When you open this screen, the ON and OFF times are always set at 00:00~00:00. Touch to highlight the day(s) of the week to be set.
Page 257: Timer Action On/Off Setting [3]
Key Operator Mode Weekly Timer [9] (continued) Timer Action On/Off Setting [3] Use this function to set the On/Off condition of the copier for a given month. Set the On- Off condition for specific days; or collectively, for all Mondays through Sundays of the given month.
Page 258 Key Operator Mode Weekly Timer [9] (continued) Timer Action On/Off Setting [3] (continued) 5 To collectively set the on/off data for the entire month by the day of the week, touch key for the desired day on the right half of the screen. If you touch an already-highlighted key, no change will occur.
Page 259: Lunch Hour Off Setting [4]
Key Operator Mode Weekly Timer [9] (continued) Lunch Hour Off Setting [4] The Weekly timer function turns the copier ON and OFF once a day. Use the Lunch hour off function to shut down power during the lunch break and then turn it on again according to the Weekly timer function setting.
Page 260: Timer Interrupt Password Setting [5]
Key Operator Mode Weekly Timer [9] (continued) Timer Interrupt Password Setting [5] Use this password setting mode to establish a 4-digit password requirement for using Timer Interrupt function. The default password of 0000 allows the timer function to be interrupted without the requirement for password entry. Weekly Timer Setting Menu Screen 1 Press [ ] to display the Help Screen, then touch...
Page 261: Control Panel Adjustment [10]
Key Operator Mode Control Panel Adjustment [10] Use this feature to check the LCD touch screen and realign the position of the touch sensor that may have shifted. Key Operator Mode Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen.
Page 262: Tray Size Setting [11]
Key Operator Mode Tray Size Setting [11] Select whether the tray size setting will be detected or not detected when ATS/APS functions. If you select it to be detected, you may also select the priority of the detection for each tray. Key Operator Mode Screen 1 1 Press [ ] to display the Help Screen, then touch...
Page 263: Power Save Setting [12]
Key Operator Mode Power Save Setting [12] Select the interval of time that must elapse before Auto Low Power and Auto Shut Off become activated. Auto Shut Off conserves more energy than Auto Low Power. The period of time selected for Auto Low Power cannot exceed the Auto Shut Off setting. Key Operator Mode Screen 1 1 Press [ ] to display the Help Screen, then touch...
Page 264: Memory Switch Setting [13]
Key Operator Mode Memory Switch Setting [13] This function allows you to change the Memory Settings listed below. See pp. 13-41~13- 45 for details on Memory Settings. SW No. Item No. 01: Auto reset timer No. 02: AUTO RESET key function No.
Page 265 No. 40: Change page no. pos. (booklet) No. 41: Trimmer (STD/Non STD size) No. 42: Timer which prohibits Printer Key Operator Mode Screen 1 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen.
Page 266 Key Operator Mode Memory Switch Setting [13] (continued) The following functions can be provided by the Memory switch settings. [1] Auto reset timer Set the reset interval starting from the completion of a copying job until the machine returns to the initial condition. [2] AUTO RESET key function Set the condition of the following modes when AUTO RESET is pressed;...
Page 267 Key Operator Mode Memory Switch Setting [13] (continued) [11] RADF APS The copier automatically selects the same size copy paper as the original placed on the RADF. (In reduction/enlargement mode, an appropriate paper size is selected according to the ratio.) [12] Platen AMS The copier detects the size of the platen original and selects the appropriate magnification ratio to correspond to the selected paper size.
Page 268 Key Operator Mode Memory Switch Setting [13] (continued) [23] Job offset operating Set the copier to offset the copies of different jobs when outputting multiple reserve jobs in succession. [24] Continuation print Set the copier to output multiple reserve jobs in succession. [25] SDF Auto start Select to feed the SDF original automatically when placed on the RADF, or press ] to feed the SDF original.
Page 269 Set the machine to allow trimming the folded or stapled & folded sheets in non-standard size (or wide size). [42] Timer which prohibits Printer Set the timer to allow the printing job after operating the copying job. Key Operator Mode 13-45...
Page 270: Machine Management List Print [14]
Key Operator Mode Machine Management List Print [14] Use this function to print out the list selected from the following items. • Job memory list: • User management list: • E.C.M. management list: Machine information managed by ECM • Font pattern list: Key Operator Mode Screen 2 1 Press [ ] to display the Help Screen, then touch...
Page 271: Call Remote Center [15]
Key Operator Mode Call Remote Center [15] When activated, the Remote Diagnostics option is automatically monitored by a Konica service representative. In case of machine trouble, select the Call Remote Center option. Your service representative will contact you to determine the appropriate means for resolving the problem.
Page 272: Side 2 Lens Adjustment [16]
Key Operator Mode Side 2 Lens Adjustment [16] Use this function to set the adjustment data of the magnification ratio for each tray as Side 2. Key Operator Mode Screen 2 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen.
Page 273: Finisher Adjustment [17]
Key Operator Mode Finisher Adjustment [17] Use this mode to make fine adjustments to each function of the finisher. Key Operator Mode Screen 2 Stapling&Folding Stopper Position Adjustment Screen Trimming Stopper Position Adjustment Screen 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen.
Page 274: Hdd Management Setting [18]
Key Operator Mode HDD Management Setting [18] Use this function to manage the image data stored in the optional HDD (HD-102) and to check the space available for new data. • Password list/delete: Display the password list on the screen, or delete the image data (JOB) by deleting the corresponding password from the list.
Page 275 Key Operator Mode HDD Management Setting [18] (continued) 1 Press [ ] to display the Help Screen, then touch HELP Enter a 4-digit key operator password, then touch Mode Screen. (See note.) 2 To display menus [11] to [18] of the Key Operator Mode Screen, touch arrow key.
Page 276: Key Operator Ecm Form
Key Operator Mode Key Operator ECM Form Password Count/Limit Password Count/Limit 13-52 Key Operator Mode...
Page 277 Section 14: Maintenance & Supplies Loading Paper Paper Indicator Paper Empty Indicator Using the HELP Key Loading Paper in Tray 1, 2, and 3 Loading Paper in Tray 4 (LT-401/LT-411) Loading Tabbed Sheets in Tray 1, 2, or 3 Loading Tabbed Sheets in Tray 4 (LT-401/LT-411) Adding Toner Inserting a New Staple Cartridge into FS-108/108B Finisher Empty Trash Basket of TU-108 Trimmer Unit...
Page 278: Section 14: Maintenance & Supplies
Maintenance & Supplies Loading Paper Paper Indicator ( The Paper indicator always lights on the tray key of the Basic Screen to indicate the paper level. Paper Empty Indicator ( The Paper empty indicator flashes on the tray key of the Basic Screen when a tray is empty.
Page 279: Loading Paper In Tray 1, 2, And 3
Maintenance & Supplies Loading Paper (continued) Loading Paper in Tray 1, 2, and 3 When displaying Thick 1 or Thick 2 on the tray key of the Basic Screen, be sure to load the specified paper; otherwise mishandled paper may occur. When displaying TAB on the tray key of the Basic Screen, see p.
Page 280: Loading Paper In Tray 4 (Lt-401/Lt-411)
Maintenance & Supplies Loading Paper (continued) Loading Paper in Tray 4 (LT-401/LT-411) When displaying Thick 1 or Thick 2 on the tray key of the Basic Screen, be sure to load the specified paper; otherwise mishandled paper may occur. When displaying TAB on the tray key of the Basic Screen, see p. 14-6. LT-401 LT-411 1 Open the LCT upper door.
Page 281: Loading Tabbed Sheets In Tray 1, 2, Or 3
Maintenance & Supplies Loading Paper (continued) Loading Tabbed Sheets in Tray 1, 2, or 3 Load offset tabbed sheets so that the tab extensions are on the left at the rear (not front) of the tray. When loading tabbed sheets in the tray, be sure to specify the paper type as TAB in the Key operator mode;...
Page 282: Loading Tabbed Sheets In Tray 4 (Lt-401/Lt-411)
Maintenance & Supplies Loading Paper (continued) Loading Tabbed Sheets in Tray 4 (LT-401/LT-411) Load offset tabbed sheets so that the tab extensions are on the right at the rear (not front) of the tray. When loading tabbed sheets in the tray, be sure to specify the paper type as TAB in the Key operator mode;...
Page 283: Adding Toner
Maintenance & Supplies Adding Toner CAUTION Keep toner cartridge away from children. Although the toner is non-toxic, do not inhale it or allow it to enter your eyes. In case the toner comes in contact with eyes, please consult your physician. When toner supply is low, “Please add toner”...
Page 284: Inserting A New Staple Cartridge Into Fs-108/108B Finisher
Maintenance & Supplies Inserting a New Staple Cartridge into FS-108/108B Finisher Use only the staples supplied by Konica. Contact your Konica representative to reorder. 1 Open the Finisher door. 2 Pull out the stacker unit by holding the stacker unit handle. 3 Pull up the cartridge housing, then remove it while sliding it along the stapler rail.
Page 285 Maintenance & Supplies Empty Trash Basket of TU-108 Trimmer Unit When the trash basket becomes full, “Trash basket of Trimmer is full / Please empty trash basket” message displays on the touch screen. 1 Open the trimmer front door. Withdraw the trash basket. 2 Empty the trash basket.
Page 286: Preventive Maintenance
After a set number of copies have been made on your copier, Preventive Maintenance (PM) will be required for maintaining optimal performance. When preventive maintenance is due, a message will prompt you to contact your service representative for maintenance. Reading the PM Counter Control Panel PRINTER CHECK HELP JOB MEMORY AUTO RESET COUNTER CLEAR QTY.
Page 287: Cleaning The Left Partition Glass
Maintenance & Supplies Cleaning the Left Partition Glass The glass partition at the far left of the platen glass is designed for real-time scanning from the RADF. Keep this glass clean; otherwise soil marks may be copied, resulting in dark lines on the copies. Cleaning the Document Glass and Cover The platen glass and the inner surface of the document feeder should be kept clean.
Page 288: Service, Repairs, Supplies
Enter the telephone number for ordering supplies in the space provided below. (Supplies Tel. No.) The PCUA number for the Drum used in the 7075 copier is: 950641. No other Drum has been approved for use in this model. 14-12 Maintenance & Supplies...
Page 289 Section 15: Troubleshooting Call for Service Limited Use of the Copier in Trouble Memory Overflow Power OFF/ON Screen Clearing Mishandled Paper Copying Hints Troubleshooting 15-1...
Page 290: Section 15: Troubleshooting
Troubleshooting Call for Service CAUTION A Call for Service message indicates a machine condition that requires the attention of your Konica service representative. Call for Service Screen 1 Immediately make note of the Report code No. indicated in the upper portion of the screen.
Page 291: Limited Use Of The Copier In Trouble
Troubleshooting Call for Service (continued) Limited Use of the Copier in Trouble If the message shown below is displayed on the Call for Service Screen, you may continue operating the copier on a limited function basis and utilize the trays and ADU that are not affected by the trouble.
Page 292: Memory Overflow
Troubleshooting Memory Overflow In certain modes, the Konica 7075 uses memory for convenience and to make operations flow smoothly. Occasional memory overflow may occur if the installed memory is inadequate for the copy conditions selected. Should memory overflow occur frequently, it is recommended that you contact your Konica service representative to extend the memory capacity in your machine.
Page 293: Power Off/On Screen
Troubleshooting Power OFF/ON Screen When any trouble affects the electric signal of the copier, the Power OFF/ON Screen will be displayed. Power OFF/ON Screen Troubleshooting 15-5...
Page 294: Clearing Mishandled Paper
Troubleshooting Clearing Mishandled Paper CAUTION When removing mishandled paper, be sure to leave no torn paper inside the machine, avoid touching the drum or scratching it in any way, and keep all metal and magnetic objects, e.g., watches, jewelry, etc. away from the drum area. When a paper misfeed occurs, the copier stops making copies and mishandled paper codes display on the screen to indicate misfeed area(s).
Page 295: Troubleshooting
Troubleshooting Clearing Mishandled Paper (continued) WARNING: The right rear area of the conveyance fixing unit generates high voltage. If touched, electrical shock may occur. DO NOT TOUCH! CAUTION: The fixing unit is internally very hot. To avoid getting burned DO NOT TOUCH the area. Use care when withdrawing the convayance fixing unit, and remove the mishandled paper in the fixing unit.
Page 296: Copying Hints
Troubleshooting Copying Hints COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON Fully insert paper trays. Close RADF. Check to be sure power plug is firmly inserted in electrical socket. COPY IMAGE IS TOO LIGHT Manually adjust copy density to darker density. Check toner indicator and add toner, if required.
Page 297 Troubleshooting Copying Hints (continued) COPYING DOES NOT BEGIN AFTER PRESSING START Insert or adjust the appropriate paper tray for copy size selected. Close document cover firmly. Close front door completely. Check to see if the message “Please close stacker cover of Trimmer” is displayed. Close trimmer stacker cover completely.
Page 298 Troubleshooting Copying Hints (continued) CALL FOR PM IS DISPLAYED IN MESSAGE AREA Contact your service representative for Preventive Maintenance. APS SELECTS THE WRONG PAPER SIZE Paper guides must be adjusted exactly to the size of originals. IN MIXED ORIGINAL MODE, A MESSAGE TO LOAD A REQUIRED PAPER SIZE DISPLAYS, EVEN THOUGH THAT SIZE IS LOADED IN ONE OF THE TRAYS Paper sizes loaded in the trays must be consistent with the tray position size;...
Page 299: Section 16: Machine Specifications
Section 16: Machine Specifications Specifications Machine Specifications 16-1...
Page 300: Specifications
Noise Level (full system) Approx. 78 dB (A) or less, during copying Automatic Modes AMS; AES (plus 9-level manual density); Specifications Subject To Change Without Notice 16-2 Machine Specifications Product Name Konica 7075 Configuration Console with stationary platen Photoreceptor OPC drum Method Laser Electrostatic Toner Black, cartridge type Warm Up Approx.
Page 301 Specifications Originals on Platen Max. size: 11"x17" (280mmx432mm) Originals in Document Feeder ADF mode: 1>1; 1>2 Paper Exit Tray 150 sheets (20 lb) Main Body Safety Standard UL 1950; CSA 22.2 No. 950 -95 Radio Interference FCC Rules part 15, sub-part B Class A Specifications Subject To Change Without Notice Magnification Presets;...
Page 302 Specifications Machine Weight 616 lb (280 kg) Machine Dimensions Main Body (with RADF) Specifications Subject To Change Without Notice 16-4 Machine Specifications Options Finisher (FS-108/FS-108B) Cover Sheet Feeder (PI-108) Trimmer Unit (TU-108) Large Capacity Tray (LCT) (LT-401/LT-411) Expanded Memory Unit (MU-401: 64MB)/(MU- 402: 128MB) Image Processor (IP-601) HDD (HD-102)
Page 303 Specifications Automatic Duplex Unit (ADU) Paper size: 11"x17", 8.5"x14", 8.5"x11", Stapling Finisher (FS-108/108B) Power source: Main body Staple Cartridge 5000 staples/cartridge Cover Sheet Feeder (PI-108) Power source : Finisher Specifications Subject To Change Without Notice 5.5"x8.5" Paper weight: 16~45 lb Paper curl limit: 20 mm or less Non-stack type Modes: 1>2;...
Page 304 Specifications Trimmer Unit (TU-108) Paper size : 11"x17", 8.5"x14", 8.5"x11"R, A4R Large Capacity Tray (LT-401) Paper type: Plain paper (16~110 lb (200g/m Large Capacity Tray (LT-411) Paper type: Plain paper (16~110 lb (200g/m Specifications Subject To Change Without Notice 16-6 Machine Specifications (8.27"x11.69", 210mmx297mm) Paper weight : 16 ~ 45 lb * One 110 lb cover paper (200g/m...
Page 305 Index Index 1...
Page 306 Index NUMBER 180 Rotation 6-33 2 in 1 key 9-10 2 Repeat 9-27 4 in 1 key 9-10 4 Repeat 9-27 600 Dpi 8-5 8 in 1 key 9-10 8 Repeat 9-27 90 Rotation 6-31 ADD PAPER key 6-27 ADD TONER message 3-13 ADJUSTMENT MODE message 6-3 AES key 6-7 All-Image Area 9-33...
Page 307 Index Front Cover Mode 9-4 Front door 3-3 FS-108/108B Finisher 3-5 Full Scan mode 9-19 GROUP key 7-10, 7-12 HDD 11-2 HDD Management Setting 13-50 HDD STORE key 11-8 HELP key 6-40 HELP MENU key 6-41 Help Mode 6-40 High Mode 8-3 Image Insert 9-17 Image Recall Mode 11-10 Image Shift 9-34...
Page 308 Power switch 3-3 Preset and User Set Ratios 6-14 Preventive Maintenance (PM) 14-10 PREVIOUS JOB LIST key 6-25 Primary (main) tray 3-5 Printer counter 5-8 Program Job 9-21 Proof Copy 6-35 PROOF COPY key 3-9, 6-35 RADF (Reversing Automatic Document Feeder) 3-3...
Page 309 MEMO...
Page 310 MEMO...
Page 311 Konica Business Technologies, Inc. 500 Day Hill Road Windsor, CT 06095 Telephone; (860) 683-2222 OP-7075-04 Printed in Japan July 2000...

Konica Minolta 7075 User Manual

Section 1: Introduction

Section 2: Safety Information

Section 3: Machine Information

Section 3: Machine Information (Continued)

Section 4: Paper Information

Section 5: Copier Management

Section 6: Basic Operations

Section 6: Basic Operations (Continued)

Section 7: Output Modes

Section 8: Special Original

Section 9: Applications

Section 10: Job Memory

Section 11: Server Function

Section 12: Shortcuts

Section 13: Key Operator Mode

Section 13: Key Operator Mode (Continued)

Section 14: Maintenance & Supplies

Section 14: Maintenance & Supplies (Continued)

Section 15: Troubleshooting

Section 16: Machine Specifications

Quick Links

Troubleshooting

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Konica Minolta 7075

Summary of Contents for Konica Minolta 7075