Daily Maintenance; Cleaning The Platen Glass; Cleaning The Inner Surface Of The Platen Cover; Cleaning The Adf Conveyance Belt Surface - Konica Minolta 1216 User Manual

Maintenance and Supplies

Daily Maintenance

The platen glass and the inner surface of the document cover should
be kept clean to prevent soil marks from being copied. Occasionally,
an anti-static cleaner may be required to ensure that a static charge is
not generated. Ask your Konica service representative to suggest an
appropriate cleaner. For optimal copy quality, follow the instructions
below.

Cleaning the Platen Glass

Cleaning the Inner Surface of the Platen Cover

Cleaning the ADF Conveyance Belt Surface

NOTE: Never use paint solvents, such as benzene or thinners, to clean any portion
of the copier. To avoid copier damage, do not spray or pour water or cleaner
directly on the platen glass. Do not use any abrasive clean the glass.
1 Raise the document cover.
2 Wipe the glass with a clean soft cloth, dampened
slightly with water or an anti-static cleaner.
1 Raise the document cover.
2 Wipe the inner surface with a clean soft cloth.
1 Raise the document cover.
2 Wipe the ADF conveyance belt surface with a
clean, soft cloth dampened with an anti-static
spray.
Maintenance and Supplies 8-3