Table of Contents
Advertisement
viii
Safety Precautions
Do not touch the rollers or moving parts such as the carriage
while cutting or plotting is in progress.
• Such action may result in injury.
Be sure to ground the earth terminal.
• If the plotter is not grounded, the operator could suffer an electric
shock in the event of current leakage.
Keep your hands, hair, etc., away from the rollers or moving
parts such as the carriage even if the plotter is stopped, as it
may suddenly start moving when data is received.
• Such action may result in injury.
Do not disassemble, repair, or remodel the plotter.
• Such action may cause electric shock or a fire hazard due to current
leakage.
• Contact with the high-voltage parts within the plotter may cause elec-
tric shock.
• If the plotter requires repairs, contact your sales representative or
nearest Graphtec vendor.
Do not connect the plotter to a non-rated power supply.
• Use of a different supply voltage may result in electric shock or a fire
hazard due to current leakage.
Do not use the plotter in a location where it will be exposed to
water, rain, or snow.
• Such locations may cause electric shock or a fire hazard due to cur-
rent leakage.
WARNING
Do not touch
Ground the plotter
Keep your distance
No disassembly
Prohibited
Avoid water
Beware of electric shock
Advertisement
Table of Contents
