Advertisement
To Ensure Safe and Correct Use
1
Safety Precautions
During a cutting or plotting operation,
do not touch the writing panel or
moving parts such as the carriage.
• Such action may cause human injury.
Keep your hands, hair, etc. away from
the writing panel and moving parts
such as the carriage even if the Craft
ROBO is stopped, because it may
suddenly start moving when data is
received.
• Such action may cause human injury.
Do not disassemble, repair, or remodel
the Craft ROBO.
• Such action may cause electrical shock
or a fire hazard due to current leakage.
• Contact with the high-voltage parts
within the Craft ROBO may cause
electrical shock.
• If the Craft ROBO requires repair,
contact your sales representative or
nearest Graphtec vendor.
WARNING
Do not touch
Keep your distance
No disassembly
Do not connect the Craft ROBO to a
non-rated power supply.
• Use of a different supply voltage may
result in electrical shock or a fire hazard
due to current leakage.
Do not use the Craft ROBO in a
location where it will be exposed to
water, rain or snow.
• Such location may cause electrical
shock or a fire hazard due to current
leakage.
If the Craft ROBO generates smoke,
is too hot, emits a strange odor, or
otherwise functions abnormally, do not
continue using it. Unplug the AC adapter's
power cord from the electrical socket.
• Use of the Craft ROBO in such status may result in a fire hazard or
electrical shock.
• After confirming that smoke is no longer being generated, contact your
sales representative or nearest Graphtec vendor to request repair.
• Never try to perform repair yourself. Repair work by inexperienced
personnel is extremely dangerous.
R a t
e d
p o w
e r
s u p
Prohibited
p l y
Avoid water
Beware of electrical shock
Prohibited
4
Advertisement
