Adjusting The Pressure Of The Multifeeder Separation Roller; Adjusting The Position Of The Multifeeder Pick-Up Roller Releasing Solenoid (Sl5); Adjusting The Position Of The Delivery Paper Deflecting Plate Solenoid (Sl14) - Canon CLC5000 Service Manual

CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS

2.7.12 Adjusting the Pressure of the Multifeeder Separation Roller

If double-feeding or pick-up faults occur
during pick-up operation, change the posi-
tion of the pressure spring [2] of the separa-
tion roller [1].
a. If double-feeding occurs, hook the pres-
sure spring on the direction of A.
b. If pick-up faults occur, hook the pres-
sure spring on the direction of B.
2.7.13 Adjusting the Position of the Multifeeder Pick-Up Roller Releasing
Solenoid (SL5)
Install the solenoid so that the distance
between the solenoid arm [2] and the rear
side plate [3] is 3.5 ±0.2 mm when the
plunger of the solenoid [1] is pushed in.
2.7.14 Adjusting the Position of the Delivery Paper Deflecting Plate Solenoid
(SL14)
1) Place the delivery assembly upright on a
flat surface.
2) Fix the solenoid in position where the
arm [2] hits the stepped screw [3] and
stops with the arm lifted and the
plunger of the solenoid [1] pushed in.
5-40
3.5±0.2mm
COPYRIGHT © 2001 CANON INC.
[2]
F05-207-13
[2]
[3]
F05-207-14 (rear)
[1]
[2]
F05-207-15 (rear)
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
[1]
A
B
[1]
[3]