Removing The Right Cover (Lower Rear); Removing The Waste Toner Bottle Holder - Canon iR6570 series Service Manual

Chapter 8
1) Remove the 4 screws [1], and detach the main controller box cover
[2].
[2]
2) Disconnect the connector [1] of the reader unit communications
cable.
3) Remove the 3 screws [1], and detach the upper rear right cover [2].
[1]
[1]
8-48
[1]
F-8-112
[1]
F-8-113
[2]
F-8-114
4) Disconnect all connectors of the main control PCB, and free all
harnesses from the 4 wire saddles [1]; then, detach the main
controller box [3].
[2]
[2]

8.10.10.4 Removing the Right Cover (lower rear)

1) Remove the 2 screws [1], and detach the right cover (lower rear) [2].

8.10.10.5 Removing the Waste Toner Bottle Holder

1) Remove the waste toner bottle.
2) Remove the 2 screws [1], and remove the 2 clamps [2]; then, move
the main power switch base [3] to the side.
[1] [2] [3]
[1]
F-8-115
0009-3913
[1]
[2]
F-8-116
0009-3851