[3]
When detaching the copyboard glass, take care not to touch the white
plate attached to its back. (Soiling can cause lines in the image). If
soiled, clean it using lint-free paper moistened with alcohol.)
Take care not to deform the sponge attached to the right glass retainer
[1].
[2]
5.4.10.2 Removing the CCD Unit Cover
1) Remove the 9 screws [1], and detach the CCD unit cover [2].
[1]
[2]
F-5-108
[1]
F-5-109
0008-7864
5.4.10.3 Removing the Original Size Sensor Unit
1) Remove the 3 screws [1], and shift the original size sensor unit [2].
[2]
[1]
F-5-112
2) Disconnect the connector [1], and detach the original size sensor unit
[2].
Chapter 5
[1]
[1]
[2]
F-5-110
[1]
F-5-111
0008-7865
5-33