Chapter 8
[2]
8.10.23.2 Removing the Rear Cover (lower)
1) Remove the 6 screws [1], and detach the rear cover (lower) [2].
[1]
[2]
8.10.23.3 Removing the Main Controller Box
1) Remove the 4 screws [1], and detach the main controller box cover
[2].
8-66
[1]
[1]
F-8-195
0009-3900
[1]
[1]
[1]
[1]
F-8-196
0009-3901
[2]
2) Disconnect the connector [1] of the reader unit communications
cable.
3) Remove the 3 screws [1], and detach the upper rear right cover [2].
[1]
[1]
4) Disconnect all connectors of the main control PCB, and free all
harnesses from the 4 wire saddles [1]; then, detach the main
[1]
F-8-197
[1]
F-8-198
[2]
F-8-199