Basic Sequence; Outline; 30-Sec Start-Up Mode - Canon iR6570 series Service Manual

9.2 Basic Sequence

9.2.1 Outline

State
At power-on
In wait
In normal use
Special mode

9.2.2 30-Sec Start-Up Mode

<Conditions of Use>
When all the following conditions exist:
-Å@the environment temperature is 17 deg C or higher.
-Å@the site is a low-humidity environment (absolute moisture content is 13 g or less)
-Å@the temperature of the fixing roller is 70 deg C or less
<Characteristics>
The target temperature of the fixing roller is 205 deg C.
However, the machine shifts to standby mode regardless of whether the temperature of the fixing roller reaches the target or not when 29.5 sec passes after
power-on.
T-9-4
Sequence Description
30-sec start-up mode When all the following conditions exist:
- the environment temperature is 17 deg C or higher
- the site is a low-humidity environment
- the temperature of the fixing roller is 70 deg C or lower
Low-temperature start-up When all the following conditions exist:
mode - the site is a high-humidity environment
- the temperature of the fixing roller is 70 deg C or lower
High humidity environment This mode is used when all the following conditions exist:
start-up mode - the site is in a high humidity environment.
- the temperature of the fixing roller is 70 deg C or lower.
Recovery mode The temperature of the fixing roller is 70 deg C or higher.
Standby mode To limit power consumption, the target temperature is
decreased at specific time intervals after the end of start-up.
Power save mode To limit power consumption, the target temperature is
decreased.
Sleep mode To limit power consumption, the target temperature is
decreased at specific time intervals after the end of start-up.
Copier/printer mode To limit power consumption, the target temperature is
decreased at specific time intervals after the end of start-up.
Down sequence None
Fixing enhancement mode To enhance fixing, the machine changes the start-up sequence
and the control temperature.
Heavy paper mode To ensure fixing on heavy paper, the machine changes the
target temperature and copying/printing speed.
Transparency mode To ensure fixing on transparencies, the target temperature is
increased.
Bond paper mode To ensure fixing for bond paper, machine increases the target
temperature in a low-temperature environment while
decreasing the copying/printing speed.
Chapter 9
0009-1226
0009-1230
9-5