Canon iR6570 series Service Manual page 323

2) Turn the fixing feed unit releasing lever [1] counterclockwise to
release the lock; then, hold the lever [1], and slide out the fixing feed
unit [2] toward the front until it stops. (At this time, the duplexing
feed unit will also slide out.)
[1]
3) Remove the 2 jam removal levers [1] of the duplexing feed unit; then,
remove the 3 screws [2], and detach the duplexing feed front cover
[3].
[2]
[2]
[1]
4) While pushing the hook shaft [1] found at the rear of the fixing feed
unit in the direction of the arrow (i.e., toward the machine's front),
turn the fixing feed unit releasing lever [2] clockwise to lock it in
place.
[1]
F-8-164
[2]
F-8-165
[3]
[2]
F-8-166
[2]
5) While pushing the 2 stopper plates [1] of the rail assembly of the
fixing feed unit toward the inside, slide out the fixing feed unit [2] to
the front.
Chapter 8
[1]
F-8-167
8-59