Timer Settings; Adjustment/Cleaning; Report Output - Canon iR6570 series Service Manual

Hide thumbs Also See for iR6570 series:
Table of Contents

Advertisement

Mode
select standard mode for local print select paper type: *auto paper select/paper source select
switch language
reverse screen color
between-job shift**
between-job interleaf**
between-set interleaf
right wait time indication
output tray paper mix**
original reading area cleaning
prompt
function limit mode
shut-down mode
reset common settings

1.2.3.2 Timer Settings

*Factory default.
Mode
time fine-adjust
auto sleep time
auto clear time
silent mode shift time
set weekly timer

1.2.3.3 Adjustment/Cleaning

*Factory default.
**Indicated when the appropriate accessory is installed.
Mode
zoom fine-adjust
center bind staple edging**
(w/ saddle finisher)
change middle bind position**
(w/ saddle finisher)
correct density
adjust page print/set print/stamp
clean wire

1.2.3.4 Report Output

*Factory default.
**Indicated when the appropriate accessory is installed.
Description
number of prints: *1 to 9999
sorter: sort/group/staple sort/*shift sort/shift group/rotation sort/rotation group/
punch hole/z-fold
duplex print: ON (open like book/open like calendar) OFF
delete file after printing:
merge file:
ON/*OFF
ON/*OFF
*ON/OFF
ON (paper source select) *OFF
ON (setting range between *10 and 9999; paper source select) *OFF
copier/box/other (for each, ON/*OFF)
*ON/OFF
*ON/OFF
ON/*OFF
execute key
Do you really want to reset?: yes/no
T-1-4
Description
by +/- in 1-min increments
10 sec; *1, 2, 10, 15, 20, 30, 40, 50 min; 1 hr; 90 min; 2, 3,4 hr
0=none, 1, ..., *2, ..., 9 min (in 1-min increments)
0=none, 1*, ..., 9 min (1-min increments)
everyday from Sun to Sat (00:00 to 23:59; in 1-min increments)
T-1-5
Description
XY, independent: -1.0% to +1.0% (in 0.1%-increments), *0%
start key
size: A3, 11x17/B4/A4R, LTR, LGL
position: -2.0 mm to +2.0 mm (in -0.25-mm increments), *0 mm
copier/box, transmit; 9 steps each (at time of shipment, set to '5')
X: -8 mm to +8 mm (in 1-mm increments), *0 mm
Y: -8 mm to +8 mm (in 1-mm increments), *0 mm
start key
Chapter 1
0009-2281
0009-2282
0009-2284
1-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir5570Ir5570n

Table of Contents