Separation Roller; Removing The Right Deck/ Cassette Pickup Assembly - Canon iR6570 series Service Manual

Chapter 8
3) Remove the two mounting screws [1].
4) Turn the duplex unit inside out.
5) Remove the four mounting screws [1], and move the duplex unit
[1]
6) Disconnect the connector [1] from the rear, and free the cable from
the two edge saddles.
[4] [5]
[3] [2]
8-82
[1]
F-8-271
[1]
F-8-272
[1]
F-8-273
[4]
[3] [1]
F-8-274
7) Remove the two mounting screws [1], and detach the horizontal
registration unit [2].
[1]
8) Disconnect the connector [1], and free the cable[2] from the two
clamps [3].
9) Remove the two mounting screws [4], and detach the horizontal
registration motor [5].
[4] [5]
[3] [2]
10) Disconnect the connector [1], and detach the horizontal registration
sensor[2].
[1]

8.10.28 Separation Roller

8.10.28.1 Removing the Right Deck/ Cassette Pickup
Assembly
The removal procedure of a right door and a left door is the same. An
illustration makes a right door an example and explains it.
1) Slide out the right deck / cassette3 / cassette4.
2) Open the right upper cover and the right lower cover.
[2]
[1]
F-8-275
[4]
[3] [1]
F-8-276
[2]
F-8-277
0009-5259