Main Drive Assembly; Cassette Pickup Drive Assembly - Canon iR6570 series Service Manual

Chapter 10
[1]
3) Remove the 3 screws [1], and detach the waste toner drive assembly
[2].
[2]

10.5.5 Main Drive Assembly

10.5.5.1 Fitting the Drive Belt
Be sure that the drive belt is fitted to the pulley and the rollers as shown
in the following figure:
[1] Main drive belt
[2] Pickup drive belt

10.5.6 Cassette Pickup Drive Assembly

10.5.6.1 Removing the Rear Cover (upper)
1) Open the cable clamp [1], and free the reader unit communications
cable [2].
10-20
[2]
F-10-45
[1]
[1]
F-10-46
0009-3935
F-10-47
0009-3936
[1]
2) Remove the 6 screws [1], and detach the upper rear cover [2].
[2]
10.5.6.2 Removing the Rear Cover (lower)
1) Remove the 6 screws [1], and detach the rear cover (lower) [2].
[1]
[2]
10.5.6.3 Removing the Main Controller Box
[2]
F-10-48
[1]
[1]
F-10-49
0009-3937
[1]
[1]
[1]
[1]
F-10-50
0009-3938