Function (Operation/Inspection Mode); Copier; Copier List - Canon iR6570 series Service Manual

Chapter 16

16.5 FUNCTION (Operation/Inspection Mode)

16.5.1 COPIER

16.5.1.1 COPIER List

<INSTALL>
Sub-item
TONER-S
CARD
E-RDS
RGW-PORT
COM-TEST
COM-LOG
RGW-ADR
<CCD>
Sub-item
CCD-ADJ
16-30
T-16-32
COPIER > FUNCTION > INSTALL
Description
Use it to stir the toner inside the developing assembly at time of installation.
Procedure
1. Select the item to highlight.
2. See that the message "Check the developer" is indicated.
At this time, check to see that the developing assembly is correctly mounted.
3. Press the OK key to start the operation. The operation will automatically
stop after a specific period of time.
during operation, time remaining (sec): at the end, if successful, '0'; if error,
'0xFFFF'.
Use it to set up the card reader.
Procedure
Enter the number of a specific card (0 to 2001), and press the OK key. (As
many as 100 cards may be used, starting from the number you have entered.)
At this time, initialization will take place for card control information (group
ID and ID No.).
Use it to specify the use of E-RDS.
0: off (do not use; default)
1: use RDS (transmit all counter information)
Use it to set the Sales Company server port number used for embedded-RDS.
settings range: 1 to 6535
Use it to check the connection to the server used for E-RDS.
Procedure
1) Select the item to highlight, and press the OK key.
2) See where a connection has been made. (The result will be indicated as 'OK'
or 'NG'.)
OK: connection possible; NG: connection not possible
Use it to indicate the details of the result of the communication test executed
for the server used for E-RDS.
Procedure
1) Select the item to highlight, and press [show info].
log information particulars: year, date, time, error code, error detail (128
characters max.)
Use it to specify the URL of the server used for E-RDS.
Procedure
1) Select the item to highlight, and press [show information].
2) When the URL input screen appears, enter the appropriate URL and press
the OK key.
(default: https://a01.ugwdevice.net/ugw/agnetif010)
T-16-33
COPIER > FUNCTION > CCD
Description
Use it to execute CCD auto adjustment.
Procedure
1) Place about 10 sheets of paper (the whitest of all papers used by the user,
other than color print paper) on the platen glass.
2) Select <CCD-ADJ> to highlight, and press the OK key.
3) See that auto adjustment takes place (about 15 sec). During adjustment,
<ACTIVE> will be indicated.
4) See that the scanning lamp goes on twice during adjustment. At the end, the
screen will show <OK!>.
5) See that al items of service mode have been updated
(COPIER>ADJUST>CCD). Record the new settings on the service label.
If you have replaced the CCD unit, scanning lamp, inverter PCB, or platen
board glass (standard white plate), be sure to execute this mode item.
0009-5980
Level
1
1
1
1
1
1
1
Level
1