Canon iR6570 series Service Manual page 612

Chapter 16
Sub-item
NS-NTLM
NS-PLNWS
NS-PLN
NS-LGN
MEAP-PN
SVMD-ENT
SSH-SW
RMT-LGIN
RE-PKEY
U-NAME
U-PASWD
DA-PORT
DA-CNCT
CHNG-STS
CHNG-CMD
MEAP-DSP
ANIM-SW
MEAP-SSL
16-44
COPIER > OPTION > BODY
Description
Use it to limit the use of NTLM authentication for SMTP authentication.
setting
0: as determined by SMTP server (default)
1: do not use
Use it to limit the use of PLAIN, LOGIN authentication, which is plain-text
authentication of SMTP authentication (however, only where PLAIN,
LOGIN authentication restrictive communication packets are encrypted).
setting
0: as determined by SMTP server (default)
1: do not use
Use it to limit the use of PLAIN, LOGIN authentication, which is plain-text
authentication of SMTP authentication (however, only where PLAIN,
LOGIN authentication restrictive communication packets are not encrypted).
setting
0: as determined by SMTP server (default)
1: do not use
Use it to limit the use of LOGIN authentication for restrictive SMTP
authentication of LOGIN authentication.
setting
0: as determined by SMTP server (default)
1: do not use
Use it to change the HTTP port number of a MEAP application.
setting: 0 to 65535 (default: 8000)
Use it to see how to start service mode:
setting
0: User Mode key -> 2 and 8 keys at the same time -> User Mode key
(default)
1: User Mode key -> 4 and 9 keys at the same time -> User Mode key
Use it to enable/disable the SSH server function.
Setting
0: off (default)
1: on
Use it to turning the SSH server function ON or OFF.
Setting
0: off (default)
1: on
Use it to enable/disable regeneration of the SSH server key.
setting
0: off (default)
1: on
Use it to set user names permitting connection to the SSH server.
setting
8 characters max. (alphanumeric)
Use it to set user passwords permitting connection to the SSH server.
setting
8 characters max. (alphanumeric)
Use it to enable/disable the port for TOT asynchronous status
communication.
setting
0: close (default)
1: open (w/ DA installed)
Use it to set the DA.
setting
0: off (default)
1: on
Use it to set the TOT status connection port number.
setting
1 to 65535 (default: 20010)
Use it to set the TOT command connection port number.
setting
1 to 65535 (default: 20000)
Use it to enable/disable a shift from the MEAP to native screen.
setting
0: off (shift to native seen; default)
1: on (do not shift to native screen)
Use it to enable/disable display of the Error/Jam screen with a MEAP
application in operation.
setting
0: off (display warning screen; default)
1: on (do not display warning screen)
Use it to set the HTTPS port for MEAP.
setting
0 to 65535 (default: 8443)
Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2