Removing The Original Size Sensor; Cooling Fan; Removing The Reader Unit Rear Cover; Removing The Cooling Fan - Canon iR6570 series Service Manual

Chapter 5
1]
F-5-113

5.4.10.4 Removing the Original Size Sensor

1) While freeing the claw at the edge, remove the original size sensor
[1].
[1]
F-5-114

5.4.11 Cooling Fan

5.4.11.1 Removing the Reader Unit Rear Cover

1) Open the cable clamp [1].
2) Disconnect the 2 connectors [2].
3) Remove the 2 screws [3].
[2]
[3]
4) Bend up the rubber cover [1], and remove the 2 screws [2] each; then,
detach the 2 angle guide plates [3].
5-34
2]
0008-7866
0009-2998
[1]
F-5-115
1]
2]
5) Fully open the ADF.
6) Remove the 3 screws [1], and slide the reader unit rear cover [2] to
the rear to detach.
Take care not to damage the ADF open/closed sensor arm [3].
3]
1]

5.4.11.2 Removing the Cooling Fan

1) Open the wire saddle [1], and disconnect the connector [2].
2) Remove the 2 screws [3], and detach the cooling fan [4].
2]
3]
F-5-116
1]
3]
F-5-117
2]
1]
F-5-118
0009-1881