controller box [3].
[2]
[2]
7.10.7.4 Removing the Waste Toner Bottle Holder
1) Remove the waste toner bottle.
2) Remove the 2 screws [1], and remove the 2 clamps [2]; then, move
the main power switch base [3] to the side.
[1]
3) Disconnect the 2 connectors [1], and remove the 2 screws [2]; then,
detach the connector base [3].
[1]
[2]
[3]
[1]
F-7-116
0009-3959
[2]
[3]
[1]
F-7-117
[3]
4) Remove the 2 screws [1], and detach the waste toner bottle holder [2].
Take care not to spill the waste toner.
[1]
[2]
7.10.7.5 Removing the Drum Motor
1) Remove the 2 screws [1], and remove the flywheel [2].
[2]
Chapter 7
[1]
[2]
F-7-118
[1]
F-7-119
0009-3960
[1]
F-7-120
7-41