8.3.3.2 Power-On Stationary Jam
The machine will identify a power-on stationary jam if paper exists over any of the following sensors when it starts initial multiple rotation at power-on:
right deck pull-off sensor (PS32)
left deck pull-off sensor (PS33)
vertical path 1 sensor (PS24)
vertical path 2 paper sensor (PS25)
vertical path 3 paper sensor (PS26)
vertical path 4 paper sensor (PS27)
write check sensor (PS28)
registration sensor (PS29)
fixing claw jam sensor (PS4)
inside delivery sensor (PS35)
outside delivery sensor (PS36)
reversal sensor 1 (PS37)
reversal sensor 2 (PS38)
duplexing paper sensor (PS34)
duplexing pre-registration sensor (PS30)
right deck pull-off sensor (PS32)
left deck pull-off sensor (PS33)
vertical path 1 sensor (PS24)
vertical path 2 sensor (PS25)
vertical path 3 sensor (PS26)
vertical path 4 sensor (PS27)
write check sensor (PS28)
registration sensor (PS29)
fixing inlet sensor (PS51)
fixing claws jam sensor (PS4)
fixing outlet sensor (PS52)
inside delivery sensor (PS35)
outside delivery sensor (PS36)
reversal sensor 1 (PS37)
reversal sensor 2 (PS38)
duplexing paper sensor (PS34)
duplexing pre-registration sensor (PS30)
delivery assembly jam sensor (PS46)
T-8-8
Sensor
T-8-9
Sensor
Chapter 8
0008-9582
8-13