Product Specifications - Canon iR6570 series Service Manual

Chapter 1
If your skin or clothes have come into contact with toner, remove as much toner as possible using dry paper tissue, and wash with water. Do not use warm
or hot waster; otherwise, the toner will jell and fuse permanently with the fibers of the clothes. Also, do not bring toner into contact with vinyl, as it tends
to react.
Do not throw toner into fire. An explosion can occur.

1.2.6 Product Specifications

1.2.6.1 Product Specifications
Copyboard
Body
Light source type
Lens type
Photosensitive medium
Image reading method
Reproduction method
Exposure method
Copy density adjustment
function
Charging method
Development method
Transfer method
Separation method
Pickup method
Cassette pickup method
Paper deck pickup method
Multifeeder pickup method
Drum cleaning method
Fixing method
Delivery method
Toner level detection
function
Toner type
Toner supply type
Original type
Maximum original size
Original size detection
function
Reproduction ratio
Warm-up time
Maximum non-image width
(main scanning direction)
Maximum non-image width
(sub scanning direction)
Image margin (leading edge) 4.0+1.5/-1.0mm
Image margin (trailing edge) 2.0±1.5mm
Image margin (left/right)
Non-image width (leading
edge)
Non-image width (trailing
edge)
1-22
stream reading, fixed reading
console
xenon lamp (yellow green)
fixed focus
A-Si drum (80-mm dia.)
light-receiving element (1 line CCD)
indirect electrostatic
laser light
auto or manual
corona
dry, 1-component toner projection
corona / post
static separation
from cassette, manual feeder, paper deck
separation retard
separation retard
separation retard
blade + magnet roller
heat roller (IH heater)
face-down, face-up
yes
Magnetic, positive toner
toner bottle
sheet, book, 3-D object (2 kg max.)
297mm x 431.8mm
fixed sensor in combination with CCD
100% (1:1), reduce (1:0.250, 1:0.500, 1:0.611, 1:0.707,
1:0.816, 1:0.865), enlarge (1:1.154, 1:1.224, 1:1.414, 1:2.000,
1:4.000), between (1:0.250 to 4.000) (25% and 400%, in 1%-
increments)
30sec or less
2mm or less
2mm or less
left: 2.5±1.5mm (2nd side: 2.5±2.0mm), right: 0.5mm or more
4.0+1.5/-1.0mm (w/ ADF: 4.5±1.8mm)
2.0±1.5mm (W/ ADF: 2.0±1.8mm)
0008-8570