[1]
3) Disconnect the 2 connectors [1], and remove the 2 screws [2]; then,
detach the connector base [3].
[3]
4) Remove the 2 screws [1], and detach the waste toner bottle holder [2].
Take care not to spill the waste toner.
[1]
[2]
[2]
[3]
[1]
F-8-190
[1]
[2]
F-8-191
[1]
F-8-192
8.10.22.6 Removing the Vertical Path Upper Motor
1) Disconnect the connector [2], remove the two screws [1], and detach
the vertical path upper motor [3].
[3]
[1]
8.10.23 Vertical Path Duplex Motor
8.10.23.1 Removing the Rear Cover (upper)
1) Open the cable clamp [1], and free the reader unit communications
cable [2].
[1]
2) Remove the 6 screws [1], and detach the upper rear cover [2].
Chapter 8
0009-3910
[2]
[1]
F-8-193
0009-3899
[2]
F-8-194
8-65