Connecting The Reader Communication Cable; Checking The Environment Switch - Canon iR6570 series Service Manual

[2]
4) Hold the toner bottle with its mouth [1] to right, keeping in a
horizontal position, set it to the supply case [2] in the machine.
5) Pull up the lock lever [1] upward and fix the toner bottle [2].
[2]
6) Close the toner supply cover.
When the main power turns on in the state that the toner bottle has not
been set in the machine, the toner remaining meter will be displayed as
'less than 25%' on the control panel. Thereby, make sure that the toner
bottle is set in the machine before turning on the switch of the main
power.
2.2.10 Connecting the Reader Communication
Cable
1) Attach the cable clip [1] in the package to the upper rear cover.
[1]
F-2-37
[2]
[1]
F-2-38
[1]
F-2-39
0009-4282
[1]
2) Connect the reader communication cable [1] to the reader unit [2],
and clip the cable using the cable clip [3].
[3] [1]
When the clearance between the machine and the wall is tight, be sure
to mount the cable cover [1] (FB6-6210) of service part.

2.2.11 Checking the Environment Switch

1) Set the environment switch [1] and the cassette heater switch [2]
depending on the installation environment. In the event the drum/
cassette heater is necessary to turn on when turning the main power
Chapter 2
F-2-40
[2]
F-2-41
[1]
F-2-42
0008-8102
2-13