Hdd; Removing The Hdd; After Replacing The Hdd; Controller Fan - Canon iR6570 series Service Manual

4.7.5 HDD

4.7.5.1 Removing the HDD

1) Remove the upper rear cover.
2) Remove the main controller box cover.
3) Remove the screw [1], and detach the counter memory PCB [2].
Be sure to remove the counter memory PCB. If you hit the hard disk
against the memory PCB, the impact can leave appreciable damage.
4) Remove the 2 screws [1], and detach the hard disk [2] in the direction
of the arrow.
[2]
[1]
[2]
F-4-36
0009-2906
[2] [1]
F-4-37
[1]
F-4-38

4.7.5.2 After Replacing the HDD

1) Format the HDD.
Start up the machine in safe mode (i.e., while holding down the 2 and 8
keys, turn on the main power).
Using the HD format function of the SST, format all partitions ($); for
details, see the descriptions given for upgrading.
2) Download the system software.
Using the SST, download the following: System, Language, RUI,
MEAP CONT (MEAP content), SDICT (OCR dictionary), KEY (key/
certificate for encrypted communication), TTS (audio dictionary).

4.7.6 Controller Fan

4.7.6.1 Removing the Controller Cooling Fan

1) Remove the 3 screws [1], and detach the upper rear right cover [2];
then, remove the 2 screws [3], and detach the upper right cover [4].
[4]
2) Open the right door [1], and remove the screw [2].
3) Remove the screw [1], and detach the connector cover [2].
Chapter 4
0009-5137
0009-2910
[3]
[1]
[2]
[1]
F-4-39
[2]
[1]
F-4-40
4-19