Removing The Fixing Feed Unit Releasing Lever Switch; Feeding Belt; Removing The Fixing Feed Unit - Canon iR6570 series Service Manual

[2]
[1]
3) Remove the 2 screws [1], and detach the fixing feed unit front cover
[2]; then, remove the 2 screws [3], and detach the fixing feed unit
middle cover [4].
[3]
[3] [4]
8.10.25.3 Removing the Fixing Feed Unit Releasing
Lever Switch
1) Disconnect the two connectors [1], and remove the screw [2]; then,
detach the harness guide [3].
2) Remove the two mounting screws [1], and detach the fixing feeding
unit releasing lever support [2].
F-8-225
[1]
[2]
[1]
F-8-226
0009-5159
[1]
[3]
[2]
[1]
F-8-227
[1]
3) Remove the mounting screw [1], and detach the releasing lever switch
[2].

8.10.26 Feeding Belt

8.10.26.1 Removing the Fixing Feed Unit

1) Open the front cover [1].
2) Turn the fixing feed unit releasing lever [1] counterclockwise to
release the lock; then, hold the lever [1], and slide out the fixing feed
unit [2] toward the front until it stops. (At this time, the duplexing
feed unit will also slide out.)
Chapter 8
[2]
[1]
F-8-228
[2]
[1]
F-8-229
0009-5139
[1]
F-8-230
8-73