Canon iR6570 series Service Manual page 603

- Solenoid
<CLEAR>
Sub-item
ERR
DC-CON
R-CON
JAM-HIST
ERR-HIST
PWD-CLR
ADRS-BK
CNT-MCON
CNT-DCON
Code Name
1 right deck pickup solenoid (SL6)
2 left deck pickup solenoid (SL7)
3 cassette 3 pickup solenoid (SL3)
4 cassette 4 pickup solenoid (SL4)
5 manual feed release solenoid (SL2)
6 deck pickup roller release solenoid (SL101)
7 delivery flapper solenoid (SL5)
8 reversing flapper solenoid (SL8)
9 fixing inlet guide drive solenoid (SL1); plunger returned
10 fixing inlet guide drive solenoid (SL1); plunger drawn
11 fixing web solenoid (SL9)
COPIER > FUNCTION > CLEAR
Description
Use it to reset an error code.
(codes: E000, E001, E002, E003, E004, E005)
Procedure
1) Select the item, and press the OK key.
2) Turn off and then on the main power.
Use it to initialize the RAM on the DC controller PCB.
The RAM will be initialized when the main power switch is turned off and then
back on.
Procedure
1) Print out the service mode particulars using the following:
COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then on the main power switch.
4) As necessary, enter the data you have printed using P-PRINT.
Use it to initialize the RAM on the reader controller PCB.
The settings will be initialized when you turn off and then on the main power
switch.
Procedure
1) Print out the service mode particulars using the following:
COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.
4) As necessary, enter the data you have printed using P-PRINT.
Use it to reset the jam history.
The jam history will be reset when the OK key is pressed.
Procedure
1) Select the item, and press the OK key.
Use it to reset the error code history.
The error code will be reset when the OK key is pressed.
1) Select the item, and press the OK key.
Use it to reset the password of the system administrator.
The password of 'system administrator' set in user mode is reset when the OK
key is pressed.
Procedure
1) Select the item, and press the OK key.
Clearing the address book.
The address book is cleared when the main power switch is turned OFF and
ON.
Use it to reset the service counter whose reading is kept by the main controller
PCB.
The counter reading is reset when the OK key is pressed.
Procedure
1) Select the item, and press the OK key.
Use it to reset the service counter whose reading is kept by the DC controller
PCB.
The counter reading will be reset when the OK key is pressed.
Procedure
1) Select the item, and press the OK key.
T-16-45
Chapter 16
Level
1
1
1
1
1
1
1
1
1
16-35