Chapter 9
9.5.23.2 Points to Note When Mounting the Upper
Separation Claw
- When mounting the upper separation claw, be sure to pay attention to
the spatial relationship between the claw and the spring.
9.5.24 Lower Separation Claw
9.5.24.1 Removing the Lower Separation Claw Unit
1) Remove the fixing upper unit.
2) Free the harness from the clamps, and disconnect the connector [1].
3) Remove the 2 screws [1], and detach the lower separation claw unit
[2].
9-46
0009-4924
F-9-149
0009-2911
[1]
F-9-150
[1]
9.5.24.2 Removing the lower Separation Claw
1) Remove the fixing upper unit.
2) Remove the lower separation claw unit.
3) Remove the spring [1].
[1]
4) Remove the 3 screws [1], and detach the lower separation claw
support plate [2]; then, detach the lower separation claw [3].
[2]
[1]
[2]
F-9-151
0009-2881
F-9-152
[3]
F-9-153