Canon iR6570 series Service Manual page 177

[C]
[B]
4) Remove the screw [1], and detach the ADF right screw cover [2].
[1]
5) Remove the screw [1], and detach the ADF left screw cover [2].
[2]
6) Remove the 6 screws [1], and detach the interface PCB cover.
[D]
F-5-140
[2]
F-5-141
[1]
F-5-142
[1]
7) Disconnect the 9 connectors [1], and remove the 5 screws [2]; then,
detach the interface PCB [3] together with its base
[3]
[2]
8) Open the 2 wire saddles [1].
9) Remove the 4 screws [2], and detach the motor cover [3] together
with the harness.
[2]
[2]
10) Free the harness from the wire saddle [1], and remove the 6 screws
[2]; then, detach the motor frame [3].
Chapter 5
[1]
[3]
[2] [1]
F-5-143
[2] [1]
[1] [2]
F-5-144
[3] [1]
F-5-145
5-39