The text of the label may differ from model to model.
1.2.5.3 Handling the Machine's Laser Unit
Be sure to observe the following whenever you are planning to service the areas around the machine's laser unit:
- Do not put a screwdriver or the like that has a high rate of reflection into the laser path.
- Remove watches and rings before starting the work to avoid reflection of laser light to the eye.
The machine's laser light is red, and its covers that may reflect laser light are identified by a warning label shown below. If you must detach a cover in the
field to service the machine, be sure to exercise extra care. (Keep in mind that the machine's laser unit cannot be adjusted in the field.)
1.2.5.4 Safety of Toner
The machine's toner is a non-toxic material consisting of plastic, iron, and small amounts of colorings.