Chapter 9
9.5 Parts Replacement Procedure
9.5.1 Fixing/Feeding Assembly
9.5.1.1 Removing the Fixing Feed Unit
1) Open the front cover [1].
2) Turn the fixing feed unit releasing lever [1] counterclockwise to
release the lock; then, hold the lever [1], and slide out the fixing feed
unit [2] toward the front until it stops. (At this time, the duplexing
feed unit will also slide out.)
[1]
3) Remove the 2 jam removal levers [1] of the duplexing feed unit; then,
remove the 3 screws [2], and detach the duplexing feed front cover
[3].
9-22
0009-4963
[1]
F-9-28
[2]
F-9-29
[2]
[2]
[1]
4) While pushing the hook shaft [1] found at the rear of the fixing feed
unit in the direction of the arrow (i.e., toward the machine's front),
turn the fixing feed unit releasing lever [2] clockwise to lock it in
place.
[2]
5) While pushing the 2 stopper plates [1] of the rail assembly of the
fixing feed unit toward the inside, slide out the fixing feed unit [2] to
the front.
[3]
[2]
F-9-30
[1]
F-9-31