Left Deck Pickup Motor; Left Deck Pickup Assembly - Canon iR6570 series Service Manual

Chapter 8
[4]
[5]

8.10.8 Left Deck Pickup Assembly

8.10.8.1 Removing the Left Deck Pickup Assembly
1) Slide out the left deck.
2) Remove the two screws [1] found on the left and right sides of the left
deck[2]; then, detach the left deck[2].
[1]
3) Open the front cover.
4) Disconnect the connector [1] from inside the machine, and remove
the locking support [2].
[1]
5) Remove the two screws [1], and detach the two pickup fixing plates
[2]; then, detach the left deck pickup assembly [3].
8-46
[4]
[2]
[3]
[1]
F-8-102
0009-5096
[2]
[1]
F-8-103
[2]
F-8-104
Keep supporting the pickup assembly; otherwise, the pickup assembly
could drop when the fixing plate is removed.
[3]

8.10.9 Left Deck Pickup Motor

8.10.9.1 Removing the Rear Cover (lower)
1) Remove the 6 screws [1], and detach the rear cover (lower) [2].
[1]
[2]
8.10.9.2 Removing the High-Voltage Power Supply PCB
1) Remove the 2 screws [1], and detach the 2 grounding wires [2].
2) Disconnect the 9 connectors [3].
3) Remove the 4 screws [4], and detach the high-voltage power supply
PCB [5].
[2] [1] [1]
[1]
F-8-105
0009-3887
[1]
[1]
[1]
[1]
F-8-106
0009-3832